Bihl+Wiedemann GmbH: AS-i-Repeater ip20 Eingänge

AS-i Repeater IP20

See also:
	PDF file oft his datasheet
	Overview - AS-i Repeater/Tuner/Bus Termination

Circuit extension up to 200 m

On-Board diagnostics AS-i Fault and AS-i Power

Passive bus termination connectable for segment A

AS-i voltage metering segment A

Galvanic isolation

Requires no programming

Passive on the AS-i network
(no slave adress required)

Article no. BWU2192 Advanced Repeater with bus termination in IP20

Beside the power supply, the AS-i Repeater with On-Board-Diagnostics displays separately AS-i communication errors. The red AS-i Fault LED flashes as long as there is no AS-i communication. The communication error LED will help the customer to find basic installation problems really fast. The new AS-i Repeaters in IP 20 are compatible with all existing AS-i Repeaters and can easily be mounted into the switchboard in combination with an AS-i power supply. The passive bus termination allows a circuit extension up to 200 m.

Article no.	BWU2192	Connections:
Connections	COMBICON clamps	1	AS-i A-
AS-i voltage	26,5 ... 31,6 V via AS-i	2	AS-i A+
Max. AS-i current consumption	60 mA (network segment), 120 mA (total)	3	AS-i A-
Quantity of required AS-i power supplies	1 additionally (as any AS-i-Repeater)	4	AS-i A+
Voltage of insulation	≥ 500 V	5	n.c.
Display		...	...
PWR AS-i Seg.B (green)	AS-i power network B	12	n.c.
FAULT AS-i Seg.B (red)	AS-i communication error network B	13	AS-i B+
PWR AS-i Seg.A (green)	AS-i power network A	14	AS-i B-
FAULT AS-i Seg.A (red)	AS-i communication error network A	15	AS-i B+
TERM (yellow)	Bus termination network A enabled	16	AS-i B-
U > 26 V (green)	U AS-i segment A > 26 V
U > 18,5 V (yellow)	U AS-i segment A > 18,5 V
Applied standards	EN 61 000-6-2, EN 61 000-6-3
Operating temperature	0 ... +55 °C
Storage temperature	-25 ... +75 °C
Protection category EN 60529	IP20
Electromagnetic sustainability	according to slave specification
Dimensions (L / W / H in mm)	114 / 22,5 / 99

Note:

The AS-i Repeater does not occupy any slave address. The total amount of the slaves (31 resp. 62) per AS-i network remains constant. No programming required.

Accessories:

AS-i Power Supply (art. no. BW1649)
AS-i Bus Termination (art. no. BW1644)
AS-i Tuner (art. no. BW1648)
AS-i Repeater in IP65 (art. no. BW1273)
AS-i Analyser (art. no. BW1415)

Bihl+Wiedemann GmbH

Floßwörthstr. 41

D-68199 Mannheim

Phone: (+49) 621 / 339 96-0

Fax: (+49) 621 / 339 22 39

eMail: mail@bihl-wiedemann.de

Internet: http://www.bihl-wiedemann.de

PDF file oft his datasheet

Overview - AS-i Repeater/Tuner/Bus Termination