AS-i Repeater IP20
 


Circuit Extension by 100 m

On-Board Diagnostics AS-i Fault

Galvanic isolation

Requires no programming

Passive on the AS-i network
(no slave address required)

Simple mounting beside the AS-i power supply




Article no. BWU1460 (Circuit extension by 100 m)

The AS-i Repeater with On-Board Diagnostics have got a LED for power supply and AS-i communication errors. The red AS-i Fault LED flashes as long as there is no AS-i communication. The communication error LED will help the customer to find basic installation problems really fast.
The new AS-i Repeaters are compatible with all existing AS-i Repeaters.
Especially the AS-i Repeaters in IP20 can be easily mounted into the switchboard in combination with an AS-i power supply.
Together with the AS-i Tuner and the AS-i Bus Termination, the AS-i Repeater from Bihl+Wiedemann is a perfect package for every AS-i network.

Connections
 		Combicon clamps
Operating voltage
 		via AS-i
Operating current
 		60 mA (per network segment), 120 mA (total)
Quantity of needed AS-i power supplies
 		1
4 LEDs
PWR1
 		AS-i power network 1
FAULT1
 		AS-i communication error network 1
PWR2
 		AS-i power network 2
FAULT2
 		AS-i communication error network 2
Ambient operating temperature
 		0 … +55 °C
Storage temperature
 		-25 … +75 °C
Protection category according to EN 60 529
 		IP20
Electromagnetic sustainability
 		according to slave specification
Voltage of insulation
 > 500 V
EMC
 according to EN61000-6-3, EN61000-6-2
Dimensions (L, W, H) 105 mm, 22,5 mm, 114 mm


Note: The AS-i Repeater does not occupy any slave address. The total amount of the slaves (31 respectively 62) per AS-i network remains constant. No programming required.



Connections BWU1460
1
 		n.c.
2
 		n.c.
3
 		AS-i-2
4
 		AS-i+2
5
 		n.c.
…
 …
20
 n.c.
21
 AS-i+1
22
 AS-i-1
23
 n.c.
24
 n.c.



See also:

Bihl+Wiedemann GmbH
Floßwörthstr. 41
D-68199 Mannheim
Phone: (+49) 621 / 339 96-0
Fax: (+49) 621 / 339 22 39
eMail: mail@bihl-wiedemann.de
Internet: http://www.bihl-wiedemann.de