ASi-5 Safety
New gateways and first input modules with safe and standard signals are available
ASi-5 Safety is certified and ready for use and complements optimally the established ASi Safety. The latest Safety generation can be easily integrated into existing solutions. Main advantage of ASi-5 Safety: You can use many safe and non-safe signals under just a single address.
Discover now our new ASi-5/ASi-3 Gateway family with integrated ASi-5 Safety - as well as the first ASi-5 Safety input modules with 2 safe inputs each and up to 12 standard signals.With them, you can, for example, implement cost-effectively the connection of an operating panel to ASi - with several light buttons, an emergency stop button and a safe key switch.
ASi-5 Safety launches input modules with safe and standard signals
ASi-5 Safety is now certified and ready for use and will optimally complement the established ASi Safety line in the future. The latest Safety generation can be easily integrated into existing solutions. Main advantage of ASi-5 Safety: You can use many safe and non-safe signals under just a single address.
Discover now our first ASi-5 Safety input modules with 2 safe inputs each and up to 12 standard signals. For example, the ASi-5 Safety input modules allow you to connect an operating panel to ASi cost-effectively – with several illuminated pushbuttons, an E-stop button and a safe key switch.
The first ASi-5 Safety input modules
The ASi-5 Safety Modules with 2 safe inputs are comparable in price with our ASi-5 modules, which only have standard I/Os. This allows you to significantly reduce machine costs.
Bihl+Wiedemann has steadily expanded its safety technology solution portfolio since 2005. After a short overview of previous Safety highlights, product manager Paul Werge presents the first two ASi-5 Safety input modules in IP67: BWU4209 has 2 safe inputs for floating contacts, BWU4210 has 2 safe inputs for optoelectronic devices. Both modules additionally have 12 digital self-configuring I/Os each.
Video length: 1:54
There are already many different safety controllers and solutions on the market, but unfortunately the same is also true for the number of functionally safe protocols used and the fieldbus itself.
Fieldbus independence has always been a great strength of ASi and ASi Safety. There are gateways for almost all relevant fieldbuses and safety protocols. This makes the system architecture at the I/O level completely independent of the used controller, which means that it can be standardized across all applications.
Needless to say, this advantage also applies to ASi-5 Safety. Just as with the introduction of ASi-5 in the standard area, ASi-5 Safety also offers many new options. The higher data bandwidth and extended diagnostic and parameterization options are ideal for resource-intensive applications.
This for example, makes the future implementation of IO-Link Safety possible.
ASi-5 Safety has been an integral part of ASi-5 from the very beginning: both use the same communication technology. In the case of ASi-5 Safety modules, only the normatively required protection of the data is added - with an additional checksum.This makes the transmission of these signals functionally safe up to SIL 3/PLe. This is essential whenever standards require such functional safety to protect people and the environment.
Just like ASi-3 Safety at Work, ASi-5 Safety was once again tested and certified externally according to applicable functional safety standards. Similarly, the process used for ASi-5 Safety achieves a performance level up to PLe according to ISO 13849-1, or a safety integrity level up to SIL3 according to IEC 61508/62061.
Of course, even standard sensors can be connected to ASi-5 Safety modules. With many modules, it is even possible to reconfigure connections so that the signal of the standard sensor is only transmitted via the standard protocol. This especially conserves communication resources such as addresses and bandwidth for ASi-3 Safety modules.
An additional advantage of ASi-5 Safety is that many safe and standard signals can be connected and transmitted over a single address. This saves resources and above all costs.
As an integral part of ASi-5, ASi-5 Safety can transmit safe and standard data simultaneously. Up to 32 bytes are available cyclically for this purpose. The safe data always has a 1-byte checksum, which enables safe communication up to level SIL3/PLe. As with pure ASi-5 standard modules, there is also a diagnostic and an acyclic channel. This also allows ASi-5 Safety modules to transmit detailed diagnostic messages in case of an event. An additional high-performance method is also available to read out additional information if required – e.g., for predictive maintenance or similar applications.
ASi-5 Safety uses the same mechanisms as all other ASi-5 modules. This means that it provides cyclic data along with an event-based diagnostic channel and an acyclic channel for reading out numerous indices. These indices cover a wide range of information: manufacturer, model name, the ASi ID for unique identification, module temperature, measured currents or an hour meter, to name a few." OPC UA enables this information to be transmitted to IT for evaluation..
ASi-5 and ASi-3 operate independently and in parallel on the same two-conductor cable with the same electromechanics. Only one gateway with a combined ASi-5/ASi-3 master is required when using both protocols in one installation. The same applies to ASi-5 Safety and ASi-3 Safety – all that is needed is a gateway with a combined master and a combined ASi-5/ASi-3 safety monitor. In the simplest case, it is therefore possible to just replace the gateway in an existing system with ASi-3 Safety. The system can then continue to operate without changes, and ASi-5 Safety modules can be easily added if necessary.