Logo Bihl+Wiedemann GmbH

Drive solutions

AS-i makes full use of all its strengths in material handling technology. The motor modules for roller drives from Bihl+Wiedemann allow 24V motors to be controlled directly through AS-i without the need for an additional control device. The speed of any driven roller can be varied from a central location. Our modules also make it possible to make use of the braking energy of the rollers in the system. Inputs on the modules are used to read in signals from sensors installed along the conveyor line.

 

In addition to motor modules for roller drives, Bihl+Wiedemann also provides drive solutions for remotely controlling AC motors (with or without frequency inverters) – an essential prerequisite for implementing new system structures.

 

SEW-EURODRIVE

  • SEW MOVIMOT®
  • SEW MOVI-SWITCH®
  • Separate mounting
  • Simple maintenance
Figure Type Housing

"IP20":
Protected against solid foreign bodies having a diameter of 12.5 mm or larger and against finger contact, not protected against water.


"IP40":

Protected against solid foreign bodies having a diameter of 1.0 mm or larger, protected against access with a wire, no protection against water.

"IP54":

Protection against dust in damaging amounts, complete protection against contact, protection against splashing water in any angle.


"IP65":
Dust-tight, full protection against contact, protection against spray water (jet) from any angle.

"IP67":

Dust-tight, full protection against contact, protection against temporary immersion.

Protection rating

"SEW MOVIMOT®":

Motor module to control geared motors with frequency inverters.

"SEW MOVI-SWITCH® 1E":

Motor module to control motor starters MOVI-SWITCH® 1E.

"SEW MOVI-SWITCH 2S, Lenze Smart Motor":

Motor module to control motor starters MOVI-SWITCH® 2S or to control Lenze Smart motors.

"Lenze Smart Motor":

Motor module to control Lenze Smart motors and to control additional sensors.

"Itoh Denki (PM500ME/XE/XP, PM605ME/XE/XP)":

Motor module to control 24 V motorized rollers Itoh Denki Serie Power Moller® 500ME/XE/XP and Serie Power Moller® 605ME/XE/XP.

"Interroll (EC310), RULMECA (RDR BL-2)":

Motor module to control 24 V motorized rollers Interroll Typ EC310 or RULMECA Typ RDR BL-2.

"Interroll (EC200, EC300), Rollex (Typ 840)":

Motor module to control 24 V motorized rollers Interroll Typ EC200 and EC300 or Rollex Typ 840.

"Interroll (EC310), RULMECA (RDR BL-2), Itoh Denki (PM500ME/XE/XP, PM605ME/XE/XP)":

Motor module to control 24 V motorized rollers Interroll Typ EC310 (also suitable for EC200 and EC300) or RULMECA Typ RDR BL-2 or Itoh Denki Serie Power Moller® 500ME/XE/XP and Serie Power Moller® 605ME/XE/XP. 

Drive
Number of Drives

Modules with a flat housing design and with cables which exit the sides make these ideal for installation in cable ducts, cable channels, cable troughs, cable rails or cable trays. Please note the respective housing depth for your particular installation.

Flat design, installation in cable duct possible
Inputs digital Outputs digital

inputs are supplied by ASi or by AUX (auxiliary 24 V power). If supplied by ASi, inputs shall not be connected to earth or to external potential.

Input voltage (sensor supply)

Electronic outputs are supplied by ASi or by AUX (auxiliary 24 V power). If supplied by ASi, outputs shall not be connected to earth or to external potential.

For relay outputs the relay contacts are initiated from ASi. The load circuit is powered externally as specified in the data sheet.

Output voltage (actuator supply)

PUR line, oil resistant. Further connection options are available on request.

      M12 socket M12 cable socket, angled  M12 cable socket, straight   M8 cable socket, straight   round cable/connecting wires     profile cable branch          push in terminals
       2 x round cables/connecting wires 2,5 mm²

Connection

Under normal conditions (no bus termination or repeater), the permissible total length of the ASi segment is max. 100 m. The calculation should take into consideration that the length of the connection cable (round cable) for each connected passive distributor must be doubled.

In the case of the active distributors (ASi slaves) however only the one ASi profile cable is counted.

Round cable

the connection to ASi as well to AUX (auxiliary 24 V power) is made via yellow resp. black ASi profile cable with piercing technology or via M12 socket (in IP20 via clamps).

ASi connection

AB Slave (max. 62 AB Slaves/ASi network), 2 AB Slaves (max. 31 modules with 2 AB Slaves), Single Slaves (max. 31 Single Slaves/ASi network), mixed use allowed.
For modules with two slaves the second slave is turned off as long as the first slave is addressed to address "0".
Upon request, slaves are available with specific ASi Slave profiles.

ASi address
Article No.
BWU3605Active distributor ASi motor moduledepth: 35 mmIP67SEW MOVIMOT1yes, depth: 35 mm34 x electronicout of AUXout of AUX1 x round cable/connecting wires + 2 x M12 cable socket, straight, 5 poles2 mASi profile cable1 AB Slave
BWU3631Active distributor ASi motor moduledepth: 35 mmIP67SEW MOVIMOT1yes, depth: 35 mm44 x electronicout of ASi and out of AUXout of AUX1 x M12 cable socket, straight, 8 poles + 3 x M12 cable sockets, straight, 5 polesinput I1: 1 m; inputs I2...I4: 0,3 mASi profile cable1 Single Slave
BW3406cable duct motor moduledepth: 19 mmIP54SEW MOVIMOT1yes, depth: 19 mm2-out of ASi-3 x M12 cable sockets, straight, 5 polesmotor: 2 m, input: 2 mASi profile cable1 Single Slave
BWU2912IP67, 4 x M124 x M12IP67SEW MOVIMOT1no2-out of ASi-3 x M12 sockets, 5 polesnoASi profile cable1 Single Slave
BWU2956IP67, 4 x M124 x M12IP67SEW MOVIMOT1no2-out of AUX-3 x M12 sockets, 5 polesnoASi via M121 Single Slave
BWU2437IP67, 4 x M124 x M12IP67SEW MOVI-SWITCH 1E1no43 x electronicout of ASiout of ASi4 x M12 sockets, 5 polesnoASi profile cable1 Single Slave
BWU2957IP67, 4 x M124 x M12IP67SEW MOVI-SWITCH 1E1no43 x electronicout of AUXout of AUX4 x M12 sockets, 5 polesnoASi via M121 Single Slave
BWU2767IP67, 4 x M124 x M12IP67SEW MOVI-SWITCH 1E2no42 x electronicout of AUXout of AUX4 x M12 sockets, 5 polesnoASi profile cable1 AB Slave
BWU3032IP67, 4 x M124 x M12IP67SEW MOVI-SWITCH 2S, Lenze Smart Motor2no44 x electronicout of AUXout of AUX4 x M12 sockets, 5 polesnoASi profile cable1 AB Slave

Lenze Smart Motor

  • Connections for up to 2 Lenze Smart Motors
  • Connections for up to 3 sensors
  • Control of up to 5 speeds
  • Simple connection of motors via M12 connectors
  • Separate mounting
  • Simple maintenance
Figure Type Housing

"IP20":
Protected against solid foreign bodies having a diameter of 12.5 mm or larger and against finger contact, not protected against water.


"IP40":

Protected against solid foreign bodies having a diameter of 1.0 mm or larger, protected against access with a wire, no protection against water.

"IP54":

Protection against dust in damaging amounts, complete protection against contact, protection against splashing water in any angle.


"IP65":
Dust-tight, full protection against contact, protection against spray water (jet) from any angle.

"IP67":

Dust-tight, full protection against contact, protection against temporary immersion.

Protection rating

"SEW MOVIMOT®":

Motor module to control geared motors with frequency inverters.

"SEW MOVI-SWITCH® 1E":

Motor module to control motor starters MOVI-SWITCH® 1E.

"SEW MOVI-SWITCH 2S, Lenze Smart Motor":

Motor module to control motor starters MOVI-SWITCH® 2S or to control Lenze Smart motors.

"Lenze Smart Motor":

Motor module to control Lenze Smart motors and to control additional sensors.

"Itoh Denki (PM500ME/XE/XP, PM605ME/XE/XP)":

Motor module to control 24 V motorized rollers Itoh Denki Serie Power Moller® 500ME/XE/XP and Serie Power Moller® 605ME/XE/XP.

"Interroll (EC310), RULMECA (RDR BL-2)":

Motor module to control 24 V motorized rollers Interroll Typ EC310 or RULMECA Typ RDR BL-2.

"Interroll (EC200, EC300), Rollex (Typ 840)":

Motor module to control 24 V motorized rollers Interroll Typ EC200 and EC300 or Rollex Typ 840.

"Interroll (EC310), RULMECA (RDR BL-2), Itoh Denki (PM500ME/XE/XP, PM605ME/XE/XP)":

Motor module to control 24 V motorized rollers Interroll Typ EC310 (also suitable for EC200 and EC300) or RULMECA Typ RDR BL-2 or Itoh Denki Serie Power Moller® 500ME/XE/XP and Serie Power Moller® 605ME/XE/XP. 

Drive
Number of Drives Inputs digital Outputs digital

inputs are supplied by ASi or by AUX (auxiliary 24 V power). If supplied by ASi, inputs shall not be connected to earth or to external potential.

Input voltage (sensor supply)

Electronic outputs are supplied by ASi or by AUX (auxiliary 24 V power). If supplied by ASi, outputs shall not be connected to earth or to external potential.

For relay outputs the relay contacts are initiated from ASi. The load circuit is powered externally as specified in the data sheet.

Output voltage (actuator supply)

PUR line, oil resistant. Further connection options are available on request.

      M12 socket M12 cable socket, angled  M12 cable socket, straight   M8 cable socket, straight   round cable/connecting wires     profile cable branch          push in terminals
       2 x round cables/connecting wires 2,5 mm²

Connection

the connection to ASi as well to AUX (auxiliary 24 V power) is made via yellow resp. black ASi profile cable with piercing technology or via M12 socket (in IP20 via clamps).

ASi connection

AB Slave (max. 62 AB Slaves/ASi network), 2 AB Slaves (max. 31 modules with 2 AB Slaves), Single Slaves (max. 31 Single Slaves/ASi network), mixed use allowed.
For modules with two slaves the second slave is turned off as long as the first slave is addressed to address "0".
Upon request, slaves are available with specific ASi Slave profiles.

ASi address
Article No.
BWU3436Active distributor ASi motor moduledepth: 35 mmIP67Lenze Smart Motor143 x electronicout of AUXout of AUX4 x M12 cable sockets, straight, 5 polesASi profile cable1 AB Slave
BWU3640Active distributor ASi motor moduledepth: 35 mmIP67Lenze Smart Motor143 x electronicout of ASiout of ASi1 x M12 cable socket, straight, 8 poles + 2 x M12 cable socket, straight, 5 polesASi profile cable1 AB Slave
BWU3115IP67, 4 x M124 x M12IP67Lenze Smart Motor143 x electronicout of AUXout of AUX4 x M12 sockets, 5 polesASi profile cable1 AB Slave
BWU3181IP67, 4 x M124 x M12IP67Lenze Smart Motor143 x electronicout of AUXout of AUX4 x M12 sockets, 5 polesASi via M121 AB Slave
BWU3032IP67, 4 x M124 x M12IP67SEW MOVI-SWITCH 2S, Lenze Smart Motor244 x electronicout of AUXout of AUX4 x M12 sockets, 5 polesASi profile cable1 AB Slave

24 V Motorized Rollers

  • Itoh Denki (PM500ME/XE/XP, PM605ME/XE/XP)
  • Interroll (EC200, EC300, EC310)
  • RULMECA (RDR BL-2)
  • Rollex (Typ 840)
Figure Type Housing

"IP20":
Protected against solid foreign bodies having a diameter of 12.5 mm or larger and against finger contact, not protected against water.


"IP40":

Protected against solid foreign bodies having a diameter of 1.0 mm or larger, protected against access with a wire, no protection against water.

"IP54":

Protection against dust in damaging amounts, complete protection against contact, protection against splashing water in any angle.


"IP65":
Dust-tight, full protection against contact, protection against spray water (jet) from any angle.

"IP67":

Dust-tight, full protection against contact, protection against temporary immersion.

Protection rating

"SEW MOVIMOT®":

Motor module to control geared motors with frequency inverters.

"SEW MOVI-SWITCH® 1E":

Motor module to control motor starters MOVI-SWITCH® 1E.

"SEW MOVI-SWITCH 2S, Lenze Smart Motor":

Motor module to control motor starters MOVI-SWITCH® 2S or to control Lenze Smart motors.

"Lenze Smart Motor":

Motor module to control Lenze Smart motors and to control additional sensors.

"Itoh Denki (PM500ME/XE/XP, PM605ME/XE/XP)":

Motor module to control 24 V motorized rollers Itoh Denki Serie Power Moller® 500ME/XE/XP and Serie Power Moller® 605ME/XE/XP.

"Interroll (EC310), RULMECA (RDR BL-2)":

Motor module to control 24 V motorized rollers Interroll Typ EC310 or RULMECA Typ RDR BL-2.

"Interroll (EC200, EC300), Rollex (Typ 840)":

Motor module to control 24 V motorized rollers Interroll Typ EC200 and EC300 or Rollex Typ 840.

"Interroll (EC310), RULMECA (RDR BL-2), Itoh Denki (PM500ME/XE/XP, PM605ME/XE/XP)":

Motor module to control 24 V motorized rollers Interroll Typ EC310 (also suitable for EC200 and EC300) or RULMECA Typ RDR BL-2 or Itoh Denki Serie Power Moller® 500ME/XE/XP and Serie Power Moller® 605ME/XE/XP. 

Drive
Number of Drives

"yes, separatly for each motor, 3,5 A (slow-blow fuse)":

In the motor module UL approved fuses are placed before each of the motor supply connections. A short circuit in the motor causes this fuse to blow, protecting the connection cable between the module and motor.

After blowing the fuse the module is no longer functional and needs to be replaced. The characteristics of the fuse must be checked against the motor data before using the module.

The protection circuit in the module allows a very simple protection of the motor cables. The fuse for the cable protection is a slow-blow one; without short circuit the robust behavior of the module remains.


"no":

The motor module is designed to supply the 24 V directly to the motor. At high currents or surges as they occur for example at braking, the module will not be damaged.

The cable protection should be realized outside the motor module with additional measures.

Line protection fuse

Modules with a flat housing design and with cables which exit the sides make these ideal for installation in cable ducts, cable channels, cable troughs, cable rails or cable trays. Please note the respective housing depth for your particular installation.

Flat design, installation in cable duct possible
Inputs digital Outputs digital Outputs analog

inputs are supplied by ASi or by AUX (auxiliary 24 V power). If supplied by ASi, inputs shall not be connected to earth or to external potential.

Input voltage (sensor supply)

Electronic outputs are supplied by ASi or by AUX (auxiliary 24 V power). If supplied by ASi, outputs shall not be connected to earth or to external potential.

For relay outputs the relay contacts are initiated from ASi. The load circuit is powered externally as specified in the data sheet.

Output voltage (actuator supply)

PUR line, oil resistant. Further connection options are available on request.

      M12 socket M12 cable socket, angled  M12 cable socket, straight   M8 cable socket, straight   round cable/connecting wires     profile cable branch          push in terminals
       2 x round cables/connecting wires 2,5 mm²

Connection

Under normal conditions (no bus termination or repeater), the permissible total length of the ASi segment is max. 100 m. The calculation should take into consideration that the length of the connection cable (round cable) for each connected passive distributor must be doubled.

In the case of the active distributors (ASi slaves) however only the one ASi profile cable is counted.

Round cable

the connection to ASi as well to AUX (auxiliary 24 V power) is made via yellow resp. black ASi profile cable with piercing technology or via M12 socket (in IP20 via clamps).

ASi connection

AB Slave (max. 62 AB Slaves/ASi network), 2 AB Slaves (max. 31 modules with 2 AB Slaves), Single Slaves (max. 31 Single Slaves/ASi network), mixed use allowed.
For modules with two slaves the second slave is turned off as long as the first slave is addressed to address "0".
Upon request, slaves are available with specific ASi Slave profiles.

ASi address
Article No.
BWU3278cable duct motor moduledepth: 19 mmIP54Itoh Denki (PM500ME/XE/XP, PM605ME/XE/XP)2yes, separately for each motor, 3,5 A (slow-blow fuse)yes, depth: 19 mm44 x electronic2out of ASiout of AUX2 x M8 cable sockets, straight, 5 poles + 2 x M8 cable sockets, straight, 4 polesmotor: 0,40 m, input: 0,06 mASi profile cable1 AB Slave
BW3567cable duct motor moduledepth: 19 mmIP54Itoh Denki (PM500ME/XE/XP, PM605ME/XE/XP)2yes, separately for each motor, 3,5 A (slow-blow fuse)yes, depth: 19 mm44 x electronic2out of ASiout of AUX2 x M8 cable sockets, straight, 5 poles + 2 x M8 cable sockets, straight, 4 polesmotor: 0,40 m, input: 0,40 mASi profile cable1 AB Slave
BWU3679cable duct motor moduledepth: 19 mmIP54Itoh Denki (PM500ME/XE/XP, PM605ME/XE/XP)2yes, separately for each motor, 3,5 A (slow-blow fuse)yes, depth: 19 mm44 x electronic2out of ASiout of AUX2 x M8 snap-in cable sockets, straight, 5 poles + 2 x M12 cable sockets, straight, 5 polesmotor: 0,40 m, input: 0,06 mASi profile cable1 AB Slave
BWU3290cable duct motor moduledepth: 19 mmIP54Interroll (EC310), RULMECA (RDR BL-2)2yes, separately for each motor, 3,5 A (slow-blow fuse)yes, depth: 19 mm42 x electronic2out of ASiout of AUX2 x M8 snap-in cable sockets, straight, 5 poles + 2 x M8 cable sockets, straight, 4 polesmotor: 0,40 m, input: 0,06 mASi profile cable1 AB Slave
BW3409cable duct motor moduledepth: 19 mmIP54Interroll (EC310), RULMECA (RDR BL-2)2yes, separately for each motor, 3,5 A (slow-blow fuse)yes, depth: 19 mm42 x electronic2out of ASiout of AUX2 x M8 snap-in cable sockets, straight, 5 poles + 2 x M12 cable sockets, straight, 5 polesmotor: 0,60 m, input: 1 mASi profile cable1 AB Slave
BW3813cable duct motor moduledepth: 19 mmIP54Interroll (EC310), RULMECA (RDR BL-2)2yes, separately for each motor, 3,5 A (slow-blow fuse)yes, depth: 19 mm422out of ASiout of AUX2 x M8 snap-in cable sockets, straight, 5 poles + 2 x M12 cable sockets, straight, 5 polesmotor: 0,60 m, input: 1 mASi profile cable1 AB Slave
BW3452passive cable duct motor moduledepth: 18 mmIP54Itoh Denki (PM500ME/XE/XP, PM605ME/XE/XP)2yes, separately for each motor, 3,5 A (slow-blow fuse)yes, depth: 18 mm2 x light barrier2-out of AUXout of AUX2 x M8 cable sockets, straight, 5 poles+ 1 x M8 cable plug, straight, 5 poles + 2 x M8 cable sockets, straight, 4 polesmotor: 0,43 m, input: 0,09 m, AUX: 0,13 m--
BWU2715IP67, 4 x M124 x M12IP67Itoh Denki (PM500ME/XE/XP, PM605ME/XE/XP)2yes, separately for each motor, 3,5 A (slow-blow fuse)no24 x electronic2out of ASiout of AUX4 x M12 sockets, 5 polesnoASi profile cable1 AB Slave
BWU3804IP67, 4 x M124 x M12IP67Itoh Denki (PM500ME/XE/XP, PM605ME/XE/XP)2yes, separately for each motor, 3,5 A (slow-blow fuse)no24 x electronic2 (alternative configuration of the analog values)out of ASiout of AUX4 x M12 sockets, 5 polesnoASi profile cable1 AB Slave
BWU2765IP67, 4 x M124 x M12IP67Interroll (EC310), RULMECA (RDR BL-2)2yes, separately for each motor, 3,5 A (slow-blow fuse)no42 x electronic2out of ASiout of AUX4 x M12 sockets, 5 polesnoASi profile cable1 AB Slave
BWU2575IP67, 4 x M124 x M12IP67Interroll (EC310), RULMECA (RDR BL-2)2nono42 x electronic2out of ASiout of AUX4 x M12 sockets, 5 polesnoASi profile cable1 AB Slave
BWU2958IP67, 4 x M124 x M12IP67Interroll (EC310), RULMECA (RDR BL-2)2nono42 x electronic-out of AUXout of AUX4 x M12 sockets, 5 polesnoASi via M121 AB Slave
BWU2398IP67, 4 x M124 x M12IP67Interroll (EC200, EC300), Rollex (Typ 840)2nono42 x electronic2out of ASiout of AUX4 x M12 sockets, 5 polesnoASi profile cable1 AB Slave
BWU2766IP67, 8 x M128 x M12IP67Interroll (EC310), RULMECA (RDR BL-2), Itoh Denki (PM500ME/XE/XP, PM605ME/XE/XP)2yes, separately for each motor, 3,5 A (slow-blow fuse)no44 x electronic2out of ASiout of AUX6 x M12 sockets, 5 polesnoASi profile cable1 Single Slave + 1 AB Slave
BWU2478IP67, 8 x M128 x M12IP67Interroll (EC310), RULMECA (RDR BL-2), Itoh Denki (PM500ME/XE/XP, PM605ME/XE/XP)2nono44 x electronic2out of ASiout of AUX6 x M12 sockets, 5 polesnoASi profile cable1 Single Slave + 1 AB Slave
BWU2959IP67, 8 x M128 x M12IP67Interroll (EC310), RULMECA (RDR BL-2), Itoh Denki (PM500ME/XE/XP, PM605ME/XE/XP)2nono44 x electronic2out of ASiout of AUX6 x M12 sockets, 5 polesnoASi via M121 Single Slave + 1 AB Slave
BWU3501IP67, 8 x M128 x M12IP6724 V DC motors2nono24 x electronic-out of AUXout of AUX4 x M12 sockets, 5 polesnoASi profile cable1 AB Slave
BWU3551IP67, 8 x M128 x M12IP6724 V DC motors1nono42 x electronic-out of ASiout of AUX4 x M12 sockets, 5 polesnoASi profile cable1 Single Slave