Circuit Board Modules

BWR3213ASi PCB Module, 73 mm x 37,5 mm, 4I/4O, wiring pins, straight, thick coated

fileadmin/verteiler/4_Bild/3213.jpg

Product description

ASi PCB Module, 73 mm x 37,5 mm, 4 digital inputs, 4 digital outputs, input voltage/sensor supply out of AUX, output voltage/actuator supply out of AUX, max. 250 mA per output, periphery connection via wiring pins, straight, thick coated, LED, ASi connection via wiring pins, straight, 1 AB slave

Technical data

Type

circuit board 73 mm x 37,5 mm

Circuit board dimensions

2 holes for assembly angles.

73 mm x 37,5 mm

Inputs Safety, SIL 3, Cat. 4

Inputs digital

Outputs digital

4 x electronic

Outputs Safety, SIL 3, cat. 4

Safety signal inputs

Inputs analog

PCB connection

further connection options are available on request.

screw terminals	wiring pins, angled (pins 180° to PCB)	wiring pins, straight (pins 90° to PCB)	solder lugs	sockets	plug-in spring-type / screw terminals	connecting wires

wiring pins, straight

Coating

Coating protects components and circuit boards when touched.

thin coated	thick coated

thick coated

LED status display

status of in- and outputs is indicated by LEDs. In addition to that, both ASi LEDs (PWR green and FAULT red) show as usual regarding the ASi Slaves- the status of the ASi Slaves. Uaux is indicated by a green LED.

yes

Input voltage (sensor supply)

inputs are supplied by ASi or by AUX (auxiliary 24 V power). If supplied by ASi, inputs shall not be connected to earth or to external potential.

out of AUX

Output voltage (actuator supply)

Electronic outputs are supplied by ASi or by AUX (auxiliary 24 V power). If supplied by ASi, outputs shall not be connected to earth or to external potential.

For relay outputs the relay contacts are initiated from ASi. The load circuit is powered externally as specified in the data sheet.

out of AUX

ASi connection

The connection to ASi as well to AUX (auxiliary 24 V power) is made via yellow resp. black ASi profile cable with piercing technology or via M12 socket (in IP20 via clamps).

Line protection: If the module is supplied via a M12 connection with A or B coding, it may only be used with a current load of max. 4 A per pin in acc. with IEC 61076-2-101 and IEC 61076-2-109. A fused tap is recommended. There is no such limitation for modules supplied via piercing contacts.

wiring pin, straight

ASi address

AB Slave (max. 62 AB Slaves/ASi network), 2 AB Slaves (max. 31 modules with 2 AB Slaves), Single Slaves (max. 31 Single Slaves/ASi network), ASi-5 Slave (max. 62 ASi-5 Slaves/ASi network), mixed use allowed.
For modules with two slaves the second slave is turned off as long as the first slave is addressed to address "0".
Upon request, slaves are available with specific ASi Slave profiles.