Logo Bihl+Wiedemann GmbH

Drive solutions

AS-i makes full use of all its strengths in material handling technology. The motor modules for roller drives from Bihl+Wiedemann allow 24V motors to be controlled directly through AS-i without the need for an additional control device. The speed of any driven roller can be varied from a central location. Our modules also make it possible to make use of the braking energy of the rollers in the system. Inputs on the modules are used to read in signals from sensors installed along the conveyor line.

 

In addition to motor modules for roller drives, Bihl+Wiedemann also provides drive solutions for remotely controlling AC motors (with or without frequency inverters) – an essential prerequisite for implementing new system structures.

 

SEW-EURODRIVE

  • SEW MOVIMOT®
  • SEW MOVI-SWITCH®
  • Separate mounting
  • Simple maintenance
Figure Type Housing

"IP20":
Protected against solid foreign bodies having a diameter of 12.5 mm or larger and against finger contact, not protected against water.


"IP40":

Protected against solid foreign bodies having a diameter of 1.0 mm or larger, protected against access with a wire, no protection against water.

"IP54":

Protection against dust in damaging amounts, complete protection against contact, protection against splashing water in any angle.


"IP65":
Dust-tight, full protection against contact, protection against spray water (jet) from any angle.

"IP67":

Dust-tight, full protection against contact, protection against temporary immersion.

Protection rating

"SEW MOVIMOT®":

Motor module to control geared motors with frequency inverters.

"SEW MOVI-SWITCH® 1E":

Motor module to control motor starters MOVI-SWITCH® 1E.

"SEW MOVI-SWITCH 2S, Lenze Smart Motor":

Motor module to control motor starters MOVI-SWITCH® 2S or to control Lenze Smart motors.

"Lenze Smart Motor":

Motor module to control Lenze Smart motors and to control additional sensors.

"Itoh Denki (PM500ME/XE/XP, PM605ME/XE/XP)":

Motor module to control 24 V motorized rollers Itoh Denki Serie Power Moller® 500ME/XE/XP and Serie Power Moller® 605ME/XE/XP.

"Interroll (EC310), RULMECA (RDR BL-2)":

Motor module to control 24 V motorized rollers Interroll Typ EC310 or RULMECA Typ RDR BL-2.

"Interroll (EC200, EC300), Rollex (Typ 840)":

Motor module to control 24 V motorized rollers Interroll Typ EC200 and EC300 or Rollex Typ 840.

"Interroll (EC310), RULMECA (RDR BL-2), Itoh Denki (PM500ME/XE/XP, PM605ME/XE/XP)":

Motor module to control 24 V motorized rollers Interroll Typ EC310 (also suitable for EC200 and EC300) or RULMECA Typ RDR BL-2 or Itoh Denki Serie Power Moller® 500ME/XE/XP and Serie Power Moller® 605ME/XE/XP. 

Drive
Number of Drives

Modules with a flat housing design and with cables which exit the sides make these ideal for installation in cable ducts, cable channels, cable troughs, cable rails or cable trays. Please note the respective housing depth for your particular installation.

Flat design, installation in cable duct possible
Inputs digital Outputs digital

inputs are supplied by AS-i or by AUX (auxiliary 24 V power). If supplied by AS-i, inputs shall not be connected to earth or to external potential.

Input voltage (sensor supply)

Electronic outputs are supplied by AS-i or by AUX (auxiliary 24 V power). If supplied by AS-i, outputs shall not be connected to earth or to external potential.

For relay outputs the relay contacts are initiated from AS-i. The load circuit is powered externally as specified in the data sheet.

Output voltage (actuator supply)

PUR line, oil ans abrasion resistant, appropriate for conveyor chains. Further connection options are available on request.

      M12 socket M12 cable socket, angled  M12 cable socket, straight   M8 cable socket, straight   round cable/connecting wires     profile cable branch          push in terminals
       2 x round cables/connecting wires 2,5 mm²

Connection

the connection to AS-i as well to AUX (auxiliary 24 V power) is made via yellow resp. black AS-i profile cable with piercing technology or via M12 socket (in IP20 via clamps).

AS-i connection

AB Slave (max. 62 AB Slaves/AS-i network), 2 AB Slaves (max. 31 modules with 2 AB Slaves), Single Slaves (max. 31 Single Slaves/AS-i network), mixed use allowed.
For modules with two slaves the second slave is turned off as long as the first slave is addressed to address "0".
Upon request, slaves are available with specific AS-i Slave profiles.

AS-i address
Article No.
BW3406 cable duct motor module depth: 19 mm IP54 SEW MOVIMOT 1 yes, depth: 19 mm 2 - out of AS-i - 3 x M12 cable sockets, straight, 5 poles AS-i profile cable 1 Single Slave
BWU2912 IP67, 4 x M12 4 x M12 IP67 SEW MOVIMOT 1 no 2 - out of AS-i - 3 x M12 sockets, 5 poles AS-i profile cable 1 Single Slave
BWU2956 IP67, 4 x M12 4 x M12 IP67 SEW MOVIMOT 1 no 2 - out of AUX - 3 x M12 sockets, 5 poles AS-i via M12 1 Single Slave
BWU2437 IP67, 4 x M12 4 x M12 IP67 SEW MOVI-SWITCH 1E 1 no 4 3 x electronic out of AS-i out of AS-i 4 x M12 sockets, 5 poles AS-i profile cable 1 Single Slave
BWU2957 IP67, 4 x M12 4 x M12 IP67 SEW MOVI-SWITCH 1E 1 no 4 3 x electronic out of AUX out of AUX 4 x M12 sockets, 5 poles AS-i via M12 1 Single Slave
BWU2767 IP67, 4 x M12 4 x M12 IP67 SEW MOVI-SWITCH 1E 2 no 4 2 x electronic out of AUX out of AUX 4 x M12 sockets, 5 poles AS-i profile cable 1 AB Slave
BWU3032 IP67, 4 x M12 4 x M12 IP67 SEW MOVI-SWITCH 2S, Lenze Smart Motor 2 no 4 4 x electronic out of AUX out of AUX 4 x M12 sockets, 5 poles AS-i profile cable 1 AB Slave

Lenze Smart Motor

  • Connections for up to 2 Lenze Smart Motors
  • Connections for up to 3 sensors
  • Control of up to 5 speeds
  • Simple connection of motors via M12 connectors
  • Separate mounting
  • Simple maintenance
Figure Type Housing

"IP20":
Protected against solid foreign bodies having a diameter of 12.5 mm or larger and against finger contact, not protected against water.


"IP40":

Protected against solid foreign bodies having a diameter of 1.0 mm or larger, protected against access with a wire, no protection against water.

"IP54":

Protection against dust in damaging amounts, complete protection against contact, protection against splashing water in any angle.


"IP65":
Dust-tight, full protection against contact, protection against spray water (jet) from any angle.

"IP67":

Dust-tight, full protection against contact, protection against temporary immersion.

Protection rating

"SEW MOVIMOT®":

Motor module to control geared motors with frequency inverters.

"SEW MOVI-SWITCH® 1E":

Motor module to control motor starters MOVI-SWITCH® 1E.

"SEW MOVI-SWITCH 2S, Lenze Smart Motor":

Motor module to control motor starters MOVI-SWITCH® 2S or to control Lenze Smart motors.

"Lenze Smart Motor":

Motor module to control Lenze Smart motors and to control additional sensors.

"Itoh Denki (PM500ME/XE/XP, PM605ME/XE/XP)":

Motor module to control 24 V motorized rollers Itoh Denki Serie Power Moller® 500ME/XE/XP and Serie Power Moller® 605ME/XE/XP.

"Interroll (EC310), RULMECA (RDR BL-2)":

Motor module to control 24 V motorized rollers Interroll Typ EC310 or RULMECA Typ RDR BL-2.

"Interroll (EC200, EC300), Rollex (Typ 840)":

Motor module to control 24 V motorized rollers Interroll Typ EC200 and EC300 or Rollex Typ 840.

"Interroll (EC310), RULMECA (RDR BL-2), Itoh Denki (PM500ME/XE/XP, PM605ME/XE/XP)":

Motor module to control 24 V motorized rollers Interroll Typ EC310 (also suitable for EC200 and EC300) or RULMECA Typ RDR BL-2 or Itoh Denki Serie Power Moller® 500ME/XE/XP and Serie Power Moller® 605ME/XE/XP. 

Drive
Number of Drives Inputs digital Outputs digital

inputs are supplied by AS-i or by AUX (auxiliary 24 V power). If supplied by AS-i, inputs shall not be connected to earth or to external potential.

Input voltage (sensor supply)

Electronic outputs are supplied by AS-i or by AUX (auxiliary 24 V power). If supplied by AS-i, outputs shall not be connected to earth or to external potential.

For relay outputs the relay contacts are initiated from AS-i. The load circuit is powered externally as specified in the data sheet.

Output voltage (actuator supply)

PUR line, oil ans abrasion resistant, appropriate for conveyor chains. Further connection options are available on request.

      M12 socket M12 cable socket, angled  M12 cable socket, straight   M8 cable socket, straight   round cable/connecting wires     profile cable branch          push in terminals
       2 x round cables/connecting wires 2,5 mm²

Connection

the connection to AS-i as well to AUX (auxiliary 24 V power) is made via yellow resp. black AS-i profile cable with piercing technology or via M12 socket (in IP20 via clamps).

AS-i connection

AB Slave (max. 62 AB Slaves/AS-i network), 2 AB Slaves (max. 31 modules with 2 AB Slaves), Single Slaves (max. 31 Single Slaves/AS-i network), mixed use allowed.
For modules with two slaves the second slave is turned off as long as the first slave is addressed to address "0".
Upon request, slaves are available with specific AS-i Slave profiles.

AS-i address
Article No.
BWU3115 IP67, 4 x M12 4 x M12 IP67 Lenze Smart Motor 1 4 3 x electronic out of AUX out of AUX 4 x M12 sockets, 5 poles AS-i profile cable 1 AB Slave
BWU3181 IP67, 4 x M12 4 x M12 IP67 Lenze Smart Motor 1 4 3 x electronic out of AUX out of AUX 4 x M12 sockets, 5 poles AS-i via M12 1 AB Slave
BWU3032 IP67, 4 x M12 4 x M12 IP67 SEW MOVI-SWITCH 2S, Lenze Smart Motor 2 4 4 x electronic out of AUX out of AUX 4 x M12 sockets, 5 poles AS-i profile cable 1 AB Slave

24 V Motorized Rollers

  • Itoh Denki (PM500ME/XE/XP, PM605ME/XE/XP)
  • Interroll (EC200, EC300, EC310)
  • RULMECA (RDR BL-2)
  • Rollex (Typ 840)
Figure Type Housing

"IP20":
Protected against solid foreign bodies having a diameter of 12.5 mm or larger and against finger contact, not protected against water.


"IP40":

Protected against solid foreign bodies having a diameter of 1.0 mm or larger, protected against access with a wire, no protection against water.

"IP54":

Protection against dust in damaging amounts, complete protection against contact, protection against splashing water in any angle.


"IP65":
Dust-tight, full protection against contact, protection against spray water (jet) from any angle.

"IP67":

Dust-tight, full protection against contact, protection against temporary immersion.

Protection rating

"SEW MOVIMOT®":

Motor module to control geared motors with frequency inverters.

"SEW MOVI-SWITCH® 1E":

Motor module to control motor starters MOVI-SWITCH® 1E.

"SEW MOVI-SWITCH 2S, Lenze Smart Motor":

Motor module to control motor starters MOVI-SWITCH® 2S or to control Lenze Smart motors.

"Lenze Smart Motor":

Motor module to control Lenze Smart motors and to control additional sensors.

"Itoh Denki (PM500ME/XE/XP, PM605ME/XE/XP)":

Motor module to control 24 V motorized rollers Itoh Denki Serie Power Moller® 500ME/XE/XP and Serie Power Moller® 605ME/XE/XP.

"Interroll (EC310), RULMECA (RDR BL-2)":

Motor module to control 24 V motorized rollers Interroll Typ EC310 or RULMECA Typ RDR BL-2.

"Interroll (EC200, EC300), Rollex (Typ 840)":

Motor module to control 24 V motorized rollers Interroll Typ EC200 and EC300 or Rollex Typ 840.

"Interroll (EC310), RULMECA (RDR BL-2), Itoh Denki (PM500ME/XE/XP, PM605ME/XE/XP)":

Motor module to control 24 V motorized rollers Interroll Typ EC310 (also suitable for EC200 and EC300) or RULMECA Typ RDR BL-2 or Itoh Denki Serie Power Moller® 500ME/XE/XP and Serie Power Moller® 605ME/XE/XP. 

Drive
Number of Drives

"yes, separatly for each motor, 3,5 A (slow-blow fuse)":

In the motor module UL approved fuses are placed before each of the motor supply connections. A short circuit in the motor causes this fuse to blow, protecting the connection cable between the module and motor.

After blowing the fuse the module is no longer functional and needs to be replaced. The characteristics of the fuse must be checked against the motor data before using the module.

The protection circuit in the module allows a very simple protection of the motor cables. The fuse for the cable protection is a slow-blow one; without short circuit the robust behavior of the module remains.


"no":

The motor module is designed to supply the 24 V directly to the motor. At high currents or surges as they occur for example at braking, the module will not be damaged.

The cable protection should be realized outside the motor module with additional measures.

Line protection fuse

Modules with a flat housing design and with cables which exit the sides make these ideal for installation in cable ducts, cable channels, cable troughs, cable rails or cable trays. Please note the respective housing depth for your particular installation.

Flat design, installation in cable duct possible
Inputs digital Outputs digital Outputs analog

inputs are supplied by AS-i or by AUX (auxiliary 24 V power). If supplied by AS-i, inputs shall not be connected to earth or to external potential.

Input voltage (sensor supply)

Electronic outputs are supplied by AS-i or by AUX (auxiliary 24 V power). If supplied by AS-i, outputs shall not be connected to earth or to external potential.

For relay outputs the relay contacts are initiated from AS-i. The load circuit is powered externally as specified in the data sheet.

Output voltage (actuator supply)

PUR line, oil ans abrasion resistant, appropriate for conveyor chains. Further connection options are available on request.

      M12 socket M12 cable socket, angled  M12 cable socket, straight   M8 cable socket, straight   round cable/connecting wires     profile cable branch          push in terminals
       2 x round cables/connecting wires 2,5 mm²

Connection

the connection to AS-i as well to AUX (auxiliary 24 V power) is made via yellow resp. black AS-i profile cable with piercing technology or via M12 socket (in IP20 via clamps).

AS-i connection

AB Slave (max. 62 AB Slaves/AS-i network), 2 AB Slaves (max. 31 modules with 2 AB Slaves), Single Slaves (max. 31 Single Slaves/AS-i network), mixed use allowed.
For modules with two slaves the second slave is turned off as long as the first slave is addressed to address "0".
Upon request, slaves are available with specific AS-i Slave profiles.

AS-i address
Article No.
BWU3278 cable duct motor module depth: 19 mm IP54 Itoh Denki (PM500ME/XE/XP, PM605ME/XE/XP) 2 yes, separately for each motor, 3,5 A (slow-blow fuse) yes, depth: 19 mm 4 4 x electronic 2 out of AS-i out of AUX 2 x M8 cable sockets, straight, 5 poles + 2 x M8 cable sockets, straight, 4 poles AS-i profile cable 1 AB Slave
BWU3290 cable duct motor module depth: 19 mm IP54 Interroll (EC310), RULMECA (RDR BL-2) 2 yes, separately for each motor, 3,5 A (slow-blow fuse) yes, depth: 19 mm 4 2 x electronic 2 out of AS-i out of AUX 2 x M8 cable sockets, straight, 5 poles + 2 x M8 cable sockets, straight, 4 poles AS-i profile cable 1 AB Slave
BW3409 cable duct motor module depth: 19 mm IP54 Interroll (EC310), RULMECA (RDR BL-2) 2 yes, separately for each motor, 3,5 A (slow-blow fuse) yes, depth: 19 mm 4 2 x electronic 2 out of AS-i out of AUX 2 x M8cable sockets, straight, 5 poles + 2 x M12 cable sockets, straight, 5 poles AS-i profile cable 1 AB Slave
BW3452 passive cable duct motor module depth: 18 mm IP54 Itoh Denki (PM500ME/XE/XP, PM605ME/XE/XP) 2 yes, separately for each motor, 3,5 A (slow-blow fuse) yes, depth: 18 mm 2 x light barrier 2 - out of AUX out of AUX 2 x M8 cable sockets, straight, 5 poles+ 1 x M8 cable plug, straight, 5 poles + 2 x M8 cable sockets, straight, 4 poles - -
BWU2715 IP67, 4 x M12 4 x M12 IP67 Itoh Denki (PM500ME/XE/XP, PM605ME/XE/XP) 2 yes, separately for each motor, 3,5 A (slow-blow fuse) no 2 4 x electronic 2 out of AS-i out of AUX 4 x M12 sockets, 5 poles AS-i profile cable 1 AB Slave
BWU2765 IP67, 4 x M12 4 x M12 IP67 Interroll (EC310), RULMECA (RDR BL-2) 2 yes, separately for each motor, 3,5 A (slow-blow fuse) no 4 2 x electronic 2 out of AS-i out of AUX 4 x M12 sockets, 5 poles AS-i profile cable 1 AB Slave
BWU2575 IP67, 4 x M12 4 x M12 IP67 Interroll (EC310), RULMECA (RDR BL-2) 2 no no 4 2 x electronic 2 out of AS-i out of AUX 4 x M12 sockets, 5 poles AS-i profile cable 1 AB Slave
BWU2958 IP67, 4 x M12 4 x M12 IP67 Interroll (EC310), RULMECA (RDR BL-2) 2 no no 4 2 x electronic - out of AUX out of AUX 4 x M12 sockets, 5 poles AS-i via M12 1 AB Slave
BWU2398 IP67, 4 x M12 4 x M12 IP67 Interroll (EC200, EC300), Rollex (Typ 840) 2 no no 4 2 x electronic 2 out of AS-i out of AUX 4 x M12 sockets, 5 poles AS-i profile cable 1 AB Slave
BWU2766 IP67, 8 x M12 8 x M12 IP67 Interroll (EC310), RULMECA (RDR BL-2), Itoh Denki (PM500ME/XE/XP, PM605ME/XE/XP) 2 yes, separately for each motor, 3,5 A (slow-blow fuse) no 4 4 x electronic 2 out of AS-i out of AUX 6 x M12 sockets, 5 poles AS-i profile cable 1 Single Slave + 1 AB Slave
BWU2478 IP67, 8 x M12 8 x M12 IP67 Interroll (EC310), RULMECA (RDR BL-2), Itoh Denki (PM500ME/XE/XP, PM605ME/XE/XP) 2 no no 4 4 x electronic 2 out of AS-i out of AUX 6 x M12 sockets, 5 poles AS-i profile cable 1 Single Slave + 1 AB Slave
BWU2959 IP67, 8 x M12 8 x M12 IP67 Interroll (EC310), RULMECA (RDR BL-2), Itoh Denki (PM500ME/XE/XP, PM605ME/XE/XP) 2 no no 4 4 x electronic 2 out of AUX out of AUX 6 x M12 sockets, 5 poles AS-i via M12 1 Single Slave + 1 AB Slave
BWU3501 IP67, 8 x M12 8 x M12 IP67 24 V DC motors 2 - no 2 4 x electronic - out of AUX out of AUX 4 x M12 sockets, 5 poles AS-i via profile cable 1 AB Slave