BWU3784Active Distributor ASi Motor Module for Lenze Smart Motor, IP67, 4I/3O
Active Distributor ASi Motor Module, IP67, housing depth 35 mm, for 1 x Lenze Smart Motor, 4 digital inputs, 3 digital outputs, input voltage/sensor supply out of ASi, output voltage/actuator supply out of ASi, periphery connection via 1 x M12 cable socket, straight, 5 poles, cable length 0,3 m, 1 x M12 cable socket, straight, 5 poles, cable length 2 m, 1 x M12 cable sockets, straight, 8 poles, cable length 2 m, flat design, installation in cable duct possible (installation depth ≥ 35 mm), LED, connections for 1 x ASi profile cable, ASi connection via profile cable and piercing technology, 1 AB address
"SEW MOVIMOT®": Motor module to control geared motors with frequency inverters.
"NORD": Motor module to control geared motors with frequency inverters.
Brake chopper for 24 V motorized rollers: For limiting the voltage feedback, suitable for all 24 V motorized rollers.
|Lenze Smart Motor|
|Number of Drives||1|
Input voltage (sensor supply)
inputs are supplied by ASi or by AUX (auxiliary 24 V power). If supplied by ASi, inputs shall not be connected to earth or to external potential.
|out of ASi|
Output voltage (actuator supply)
Electronic outputs are supplied by ASi or by AUX (auxiliary 24 V power). If supplied by ASi, outputs shall not be connected to earth or to external potential.
For relay outputs the relay contacts are initiated from ASi. The load circuit is powered externally as specified in the data sheet.
|out of ASi|
PUR line, oil resistant. Further connection options are available on request.
|1 x M12 cable socket, straight, 8 poles + 2 x M12 cable socket, straight, 5 poles|
Under normal conditions (no bus termination or repeater), the permissible total length of the ASi segment is max. 100 m. The calculation should take into consideration that the length of the connection cable (round cable) for each connected passive distributor must be doubled.
In the case of the active distributors (ASi modules) however only the one ASi profile cable is counted.
|X2, I2: 2 m, I3/I4: 0,30 m|
AB address (max. 62 AB addresses/ASi network), 2 AB addresses (max. 31 modules with 2 AB addresses), Single addresses (max. 31 Single addresses/ASi network), ASi-5 address (max. 62 ASi-5 addresses/ASi network), mixed use allowed.
|1 AB address|