Logo Bihl+Wiedemann GmbH

Nouveautés produits

24 V ASi-5/ASi-3 Fieldbus Gateways

  • New: 24 V ASi-5/ASi-3 POWERLINK Gateway
  • Compatible with existing networks
  • 1.27 ms cycle time for up to 384 in- and 384 output bits
  • Integrated webserver, OPC UA server
  • Also available for: PROFINET (BWU3847), EtherNet/IP (BWU3849) & EtherCAT (BWU3854)

Starter Set ASi-5 / IO-Link

  • Set consisting of:
    • 24 Volt ASi-5/ASi-3 PROFINET Gateway (BWU3847) or 24 Volt ASi-5/ASi-3 EtherNet/IP + Modbus TCP Gateway (BWU3849), also Gateways to other fieldbus systems selectable
    • ASi-5 Slave / IO-Link Master with 4 Ports, IP67, M12 (BWU4067)
    • ASi Substructure Module in IP67, 45 mm (BWU2349)
    • Bihl+Wiedemann Software Suite for Configuration, Diagnostics and Commissioning (BW2902)
  • Sufficient space for installing your own IO-Link sensors
  • Starter kit is shipped fully assembled and wired in a convenient case
  • Cost-effective version for starting with ASi-5

ASi-5 Motor Module, IP67, M12 for SEW MOVIMOT®, 1M/4I/2O

  • Control of 1 x SEW MOVIMOT® gearmotor with frequency converter per module
  • Cyclic writing of speed, ramps etc.
  • 4 digital inputs for connecting sensors
  • 2 digital outputs 3 Input voltage out of ASi 
  • Output voltage out of AUX (24 V auxiliary power)

ASi-5 Motor Module, IP67, M12 for Interroll EC5000, 2M/4E

 

  • Control of 2 x 48 V Interroll EC5000 motorized rollers with 20 W / 35 W / 50 W
  • Cyclic writing of speed in 1.27 ms
  • 4 digital inputs for connecting sensors 3 Input voltage out of ASi
  • Motor voltage with 48 V out of AUX 3 Internal line protection fuse, separate for each motor

Other new ASi-5/ASi-3 Fieldbus Gateways

  • ASi-5 Master and ASi-3 Master in one device
  • Integrated webserver for simple diagnostics / remote maintenance
  • OPC UA server as interface for OPC UA communication
  • Chip Card for storing configuration data
  • Can replace ASi-3 Master / Gateways without any programming effort
  • Comfortable parameter setting of the connected IO-Link sensors using B+W software suites
  • In 1.27 ms up to 4 x 16 bit user data available 

 

 Available with fieldbus interface:

  • EtherNet/IP+ Modbus:
    • Double master, with integrated Safety Monitor  (BWU3825)
    • With integrated Safety Monitor  (BWU3866)
  • PROFINET:
    • Double master, 24 V ASi (BWU3852)
    • Double master, with integrated Safety Monitor (BWU4000)
    • With integrated Safety Monitor  (BWU3998)
  • EtherCAT:
    • With integrated Safety Monitor  (BWU3991)

 

New ASi-5 Slave / IO-Link Master Modules

 

  • Comfortable parameter setting of the connected IO-Link sensors using B+W software suites
  • In 1.27 ms up to 4 x 16 bit user data available

  • ASi-5 Slave / IO-Link Master, 4 Ports, Class A, connection via profile cable

  • ASi-5 Slave / IO-Link Master, 4 Ports, Class A, connection via M12
  • ASi-5 Slave / IO-Link Master, 2 Ports Class A, 2 Ports Class B,  connection via M12

Other new ASi Motor Modules:

ASi-3 Motor Module for Volta24 BLDC drives, IP67, M12/M8, 1I

  • ASi-3 Motor Module for Volta24 BLDC drives, IP67, M12/M8, 1I
  • Controls 1 x Volta24 BLDC motor with external commutation
  • 1 digital input
  • 1 AB Slave
  • Input voltage out of AUX
  • Motor voltage out of AUX
  • Connection of periphery via 1 x M12 cable socket (straight, 8-pin) and 1 x M8 cable socket (straight, 4-pin), cable length both 1 m
  • Connection of ASi using profile cable 3 Especially flat form factor, can be installed in cable duct
  • Protection rating IP67

Active Distributor ASi-3, IP67,

4I/3O

 

 

 

  • Active Distributor ASi-3, IP67, 4I/3O
  • Motor Module for controlling 1 x Lenze Smart Motor

  • 4 digital inputs
  • 3 digital outputs
  • 1 AB Slave
  • In- and output voltage out of AUX
  • Connection of periphery via 4 x M12 cable socket (right-angle, 5-pin)
  • Connection of ASi using profile cable
  • Especially flat form factor, can be installed in cable duct
  • Protection rating IP67

 

Active Distributor ASi-3, IP67, M12, 2I/2O

  • Active Distributor ASi-3, IP67, M12, 2I/2O (BWU3628)
  • Motor Module for controlling Lenze Smart Motors
  • 2 digital inputs
  • 2 digital outputs
  • 1 AB Slave
  • In- and output voltage out of AUX
  • Connection of periphery via 1 x M12 cable socket (straight, 5-pin)
  • Y wiring (inputs), round cable/connection leads (outputs)
  • Connection of ASi using profile cable
  • Especially flat form factor, can be installed in cable duct
  • Protection rating IP67

 

 

ASi-3 Motor Module for 24 V motorized rollers, IP67, M12, 2I/2M

  • ASi-3 Motor Module for 24 V motorized rollers, IP67, M12, 2I/2M (BWU4205)

  • Controls 2 x 24 V Interroll EC5000 motorized rollers (20 W / 35 W)
  • 4 digital inputs
  • 2 digital outputs, 2 analog outputs
  • 1 AB Slave
  • Input voltage out of ASi
  • Output voltage out of AUX
  • Connection of periphery via 4 x M12 sockets (5-pin)
  • Connection of ASi using profile cable
  • Internal line protection fuse, separate for each motor 4.5 A (slow-blow)
  • Protection rating IP67

ASi-5 Counter Module, IP67, M12



  • BWU4202
  • 4 x counter inputs
  • 4 x M12 sockets
  • Pulse counter
  • Counter frequency max. 250 kHz
  • Input voltage out of ASi Connection of periphery via 4 x M12 sockets (5-pin)
  • Connection of ASi using M12
  • 1 ASi-5 Slave
  • Protection rating IP67

 

ASi Light Button Module

  • ASi Light Button Module, illuminated (white/blue) (BW3478)

  • 1 x illuminated button (blue)
  • 1 x illuminated rotary switch (white), momentary contact function (2 x 40° as NO contact)
  • With mounting clip
  • Connection of ASi using M12 plug
  • 1 AB Slave
  • Protection rating IP54

New ASi-5 Digital Modules

  • High I/O density
  • Low overhead costs

New Active Distributors ASi

 

 

  • Especially flat form factor (19 or 35 mm deep), can be installed in cable duct
  • Appropriate connection of periphery integrated
  • Comfortable parameter setting using B+W software suites

  • Active Distributor ASi-5 for controlling RGB lights over ASi
  • ASi Active Distributor for connecting Banner K50 Pro Stacklight to ASi (BWU3785)
  • ASi Active Distributor for connecting Banner K50 Pro multicolor indicator to ASi (BWU4087)