Logo Bihl+Wiedemann GmbH

Passive Distributor

Passive Distributors ASi, IP67

Figure Profile cable connection

PUR line, oil resistant. Further connection options are available on request.

      M12 socket M12 cable socket, angled  M12 cable socket, straight   M8 cable socket, straight   round cable/connecting wires     profile cable branch          push in terminals
       2 x round cables/connecting wires 2,5 mm²

Connection

"4 A, changeable":

The internal protection is realized via changeable 4 A fuses (slow-blow) for ASi and/or AUX. At each connection ≤4 A are available.

"1 A, self-resetting":

The internal protection is realized via self-resetting 1 A fuses for ASi and/or AUX. At each connection ≤1 A are available.

 

"4 A, slow-blow fuse":

The internal protection is realized via one 4 A slow-blow fuse for ASi and/or AUX. At each connection ≤4 A are available.

 

"8 A, slow-blow fuse":

The internal protection is realized via one 8 A slow-blow fuse for ASi and/or AUX. At each connection ≤8 A are available.

 

 

"8 A, slow-blow fuse + 1 A, self-resetting":

The internal protection is realized via one 8 A slow-blow fuse for AUX and via one self-resetting 1 A fuse for ASi. At each M8 connection (AUX) ≤6 are available, at each M8 connection (ASi) ≤1 A are available.

Internal fuse

Under normal conditions (no bus termination or repeater), the permissible total length of the ASi segment is max. 100 m. The calculation should take into consideration that the length of the connection cable (round cable) for each connected passive distributor must be doubled.

In the case of the active distributors (ASi modules) however only the one ASi profile cable is counted.

Round cable

Modules with a flat housing design and with cables which exit the sides make these ideal for installation in cable ducts, cable channels, cable troughs, cable rails or cable trays. Please note the respective housing depth for your particular installation.

Flat design, installation in cable duct possible

status of in- and outputs is indicated by LEDs. In addition to that, both ASi LEDs (PWR green and FAULT red) show - as usual regarding the ASi modules - the status of the ASi modules. Uaux is indicated by a green LED.

LED status display
Special function Article No.
BWU30871 x ASi, 1 x AUX 24 V2 x M12 sockets, 5 poles4 A, changeablenonoyes-
BWU31171 x ASi, 1 x AUX 24 V2 x M12 sockets, 5 poles1 A, self-resettingnonoyes-
BWU31841 x ASi, 1 x AUX 24 V2 x M12 sockets, 5 polesnononoyes-
BWU34911 x ASi, 1 x AUX 24 V1 x M12 socket, 5 poles4 A, changeablenonoyes-
BWU34921 x ASi, 1 x AUX 24 V1 x M12 socket, 5 poles1 A, self-resettingnonoyes-
BWU34931 x ASi, 1 x AUX 24 V1 x M12 socket, 5 polesnononoyes-
BW32761 x ASi, 1 x AUX 24 V1 x M8 cable socket, straight, 5 poles + 1 x M8 cable socket, straight, 4 poles8 A, slow-blow fuse + 1 A, self-resetting0,20 myes, depth: 19 mmyes-
BW36811 x ASi, 1 x AUX 24 V1 x M8 snap-in cable socket, straight, 4 poles4 A, slow-blow fuse + 1 A, self-resetting0,20 myes, depth: 19 mmyes-
BW34231 x ASi, 1 x AUX 24 V1 x round cable/connecting wires8 A slow-blow fuse1,30 myes, depth: 19 mmyes-
BW32461 x ASi, 1 x AUX 24 V1 x M12 cable socket, angled, 5 poles1 A, self-resetting2 myes, depth: 19 mmyesto connect ASi devices via M12
BWU31831 x ASi, 1 x AUX 24 V1 x M12 cable socket, angled, 5 polesno2 myes, depth: 19 mmnoto connect ASi devices via M12
BWU34081 x ASi, 1 x AUX 24 V1 x M12 cable socket, angled, 5 polesno1 myes, depth: 19 mmnoto connect ASi devices via M12
BW39111 x ASi, 1 x AUX 24 V1 x M12 cable socket, straight, 5 polesno2 myes, depth: 19 mmnoto connect ASi devices via M12
BWU34031 x ASi, 1 x AUX 24 V1 x M12 cable socket, straight, 5 polesno1 myes, depth: 19 mmnoto connect ASi devices via M12
BWU37781 x ASi, 1 x AUX 24 V1 x M12 cable socket, straight, 5 polesno0,30 myes, depth: 19 mmnoto connect ASi devices via M12
BW38051 x ASi, 1 x AUX 24 V1 x M12 cable socket, straight, 5 polesno0,05 myes, depth: 19 mmnoto connect ASi devices via M12
BW33151 x ASi, 1 x AUX 24 V1 x round cable/connecting wiresno5 myes, depth: 19 mmno-
BWU33141 x ASi, 1 x AUX 24 V1 x round cable/connecting wiresno2 myes, depth: 19 mmno-
BW35121 x ASi, 1 x AUX 24 V1 x round cable/connecting wiresno1,30 myes, depth: 19 mmno-
BWU31852 x ASi1 x M12 cable socket, angled, 5 polesno2 myes, depth: 19 mmno-
BWU42422 x ASi1 x M12 cable socket, angled, 5 polesno1 myes, depth: 19 mmno-
BWU32472 x ASi1 x M12 cable socket, straight, 5 polesno2 myes, depth: 19 mmno-
BW31862 x ASi1 x round cable/connecting wiresno0,25 myes, depth: 19 mmno-
BW35242 x ASi1 x round cable/connecting wiresno5 myes, depth: 19 mmno-
BWU34071 x ASi1 x M12 cable socket, angled, 5 polesno1 myes, depth: 19 mmno-
BWU47302 x ASiprofile cable branch2 A, self-resettingnoyes, depth: 19 mmyes-
BWU31572 x ASiprofile cable branchnonoyes, depth: 19 mmno-
BWU12391 x ASi1 x M12 socket, 5 polesnononono-
BW38031 x ASi, 1 x AUX 24 V1 x M12 socket, 5 polesnononono-
BWU47281 x ASi1 x M12 socket, 5 polesnononono-
BW19761 x ASi, 1 x AUX 24 V1 x M12 socket, 5 polesnononono-
BW19741 x ASi, 1 x AUX 24 V1 x M12 cable socket, angled, 5 polesno2 myes, depth: 19 mmnoto connect ASi devices via M12
BW19771 x ASi1 x M12 cable socket, angled, 5 polesno2 myes, depth: 19 mmno-
BW19752 x ASiprofile cable branchnonoyes, depth: 19 mmno-
BWU28202 x ASi, 2 x AUX 24 V5 x M12 sockets, 5 polesnononoyes-
BWU47292 x ASi, 2 x AUX 24 Vprofile cable branchnononono-

 

 

Passive Distributor AUX 24 V, IP67

  • 16 A with 1,5 mm² wire section
  • 20 A with 2,5 mm² wire section
Figure Profile cable connection

PUR line, oil resistant. Further connection options are available on request.

      M12 socket M12 cable socket, angled  M12 cable socket, straight   M8 cable socket, straight   round cable/connecting wires     profile cable branch          push in terminals
       2 x round cables/connecting wires 2,5 mm²

Connection

"4 A, changeable":

The internal protection is realized via changeable 4 A fuses (slow-blow) for ASi and/or AUX. At each connection ≤4 A are available.

"1 A, self-resetting":

The internal protection is realized via self-resetting 1 A fuses for ASi and/or AUX. At each connection ≤1 A are available.

 

"4 A, slow-blow fuse":

The internal protection is realized via one 4 A slow-blow fuse for ASi and/or AUX. At each connection ≤4 A are available.

 

"8 A, slow-blow fuse":

The internal protection is realized via one 8 A slow-blow fuse for ASi and/or AUX. At each connection ≤8 A are available.

 

 

"8 A, slow-blow fuse + 1 A, self-resetting":

The internal protection is realized via one 8 A slow-blow fuse for AUX and via one self-resetting 1 A fuse for ASi. At each M8 connection (AUX) ≤6 are available, at each M8 connection (ASi) ≤1 A are available.

Internal fuse

Under normal conditions (no bus termination or repeater), the permissible total length of the ASi segment is max. 100 m. The calculation should take into consideration that the length of the connection cable (round cable) for each connected passive distributor must be doubled.

In the case of the active distributors (ASi modules) however only the one ASi profile cable is counted.

Round cable

Modules with a flat housing design and with cables which exit the sides make these ideal for installation in cable ducts, cable channels, cable troughs, cable rails or cable trays. Please note the respective housing depth for your particular installation.

Flat design, installation in cable duct possible

status of in- and outputs is indicated by LEDs. In addition to that, both ASi LEDs (PWR green and FAULT red) show - as usual regarding the ASi modules - the status of the ASi modules. Uaux is indicated by a green LED.

LED status display
Special function Article No.
BW35131 x AUX 24 V1 x M12 power cable socket, straight, T-coded, 4 poles8 A slow-blow fuse1 myes, depth: 19 mmyes-
BWU48751 x AUX 24 V1 x M12 power cable socket, straight, T-coded, 4 poles8 A slow-blow fuse1 myes, depth: 25 mmyes-
BWU49221 x AUX 24 V1 x M12 cable plug, straight, 4 polesno0,30 myes, depth: 19 mmnofor switching loads ≤6 A
BW47251 x AUX 24 V1 x M12 cable plug, straight, 4 polesno0,30 myes, depth: 19 mmnofor switching loads ≥100 mA
BW47601 x AUX 24 V1 x M12 cable plug, straight, 4 polesno0,30 myes, depth: 19 mmnofor switching loads ≤100 mA
BW37662 x AUX 24 V1 x M12 cable socket, straight, 5 poles1 A, self-resetting1 myes, depth: 19 mmyes-
BW33812 x AUX 24 V1 x round cable/connecting wires1 A, self-resetting3 myes, depth: 19 mmyes-
BWU42472 x AUX 24 V (galvanically separated)1 x M12 power cable socket, straight, L-coded, 4 poles8 A slow-blow fuse1 myes, depth: 25 mmyes-
BW37632 x AUX 24 V (galvanically separated)2 x M8 cable sockets, straight, 4 poles4 A slow-blow fuse1,5 myes, depth: 19 mmyespower supply of Beckhoff Ethercat I/O Boxes (EPxxxx)
BWU33062 x AUX 24 V, 16 A/20 Aprofile cable branchnonoyes, depth: 19 mmno-
BWU48972 x AUX 24 V, 16 A/20 A1 x round cable/connecting wires 2.5 mm²no1 myes, depth: 25 mmnoinfeed module
BWU40822 x AUX 24 V, 16 A/20 A1 x M12 power cable plug, straight, L-coded, 4 poles,no1 myes, depth: 25 mmno-
BW35682 x AUX 24 V, 16 A/20 A1 x M12 power cable plug, straight, T-coded, 4 polesno1 myes, depth: 25 mmno-
BWU33072 x AUX 24 V, 16 A/20 A2 x connecting wires 2,5 mm²no2 myes, depth: 19 mmnoinfeed module
BW33482 x AUX 24 V, 16 A/20 A4 x spring type terminals 2,5 mm²nonoyes, depth: 29 mmno-

 

 

Passive Distributor AUX 48 V, IP67

  • 16 A with 1,5 mm² wire section
  • 20 A with 2,5 mm² wire section
Figure Profile cable connection

PUR line, oil resistant. Further connection options are available on request.

      M12 socket M12 cable socket, angled  M12 cable socket, straight   M8 cable socket, straight   round cable/connecting wires     profile cable branch          push in terminals
       2 x round cables/connecting wires 2,5 mm²

Connection

"4 A, changeable":

The internal protection is realized via changeable 4 A fuses (slow-blow) for ASi and/or AUX. At each connection ≤4 A are available.

"1 A, self-resetting":

The internal protection is realized via self-resetting 1 A fuses for ASi and/or AUX. At each connection ≤1 A are available.

 

"4 A, slow-blow fuse":

The internal protection is realized via one 4 A slow-blow fuse for ASi and/or AUX. At each connection ≤4 A are available.

 

"8 A, slow-blow fuse":

The internal protection is realized via one 8 A slow-blow fuse for ASi and/or AUX. At each connection ≤8 A are available.

 

 

"8 A, slow-blow fuse + 1 A, self-resetting":

The internal protection is realized via one 8 A slow-blow fuse for AUX and via one self-resetting 1 A fuse for ASi. At each M8 connection (AUX) ≤6 are available, at each M8 connection (ASi) ≤1 A are available.

Internal fuse

Under normal conditions (no bus termination or repeater), the permissible total length of the ASi segment is max. 100 m. The calculation should take into consideration that the length of the connection cable (round cable) for each connected passive distributor must be doubled.

In the case of the active distributors (ASi modules) however only the one ASi profile cable is counted.

Round cable

Modules with a flat housing design and with cables which exit the sides make these ideal for installation in cable ducts, cable channels, cable troughs, cable rails or cable trays. Please note the respective housing depth for your particular installation.

Flat design, installation in cable duct possible

status of in- and outputs is indicated by LEDs. In addition to that, both ASi LEDs (PWR green and FAULT red) show - as usual regarding the ASi modules - the status of the ASi modules. Uaux is indicated by a green LED.

LED status display
Special function Article No.
BWU47651 x AUX 24 V, 1 x AUX 48 V1 x M12 power cable socket, straight, T-coded, 4 poles8 A slow-blow fuse1 myes, depth: 25 mmyes-
BWU47501 x AUX 24 V, 1 x AUX 48 V1 x M12-Power cable socket, angled, L coded, 4 poles1 A, self-resetting1 myes, depth: 25 mmyes-
BWU49002 x AUX 48 V (galvanically separated)1 x M12 power cable socket, straight, L-coded, 4 polesno2 myes, depth: 25 mmno-