Archives Drive solutions

Archives Drive solutions

Figure Type

The device communicates via the standard ASi-3 and/or ASi-5.

ASi-5/ASi-3
Housing

"IP20":
Protected against solid foreign bodies having a diameter of 12.5 mm or larger and against finger contact, not protected against water.


"IP40":

Protected against solid foreign bodies having a diameter of 1.0 mm or larger, protected against access with a wire, no protection against water.

"IP54":

Protection against dust in damaging amounts, complete protection against contact, protection against splashing water in any angle.


"IP65":
Dust-tight, full protection against contact, protection against spray water (jet) from any angle.

"IP67":

Dust-tight, full protection against contact, protection against temporary immersion.

Protection rating

If you cannot find your drive, please do not hesitate to contact us. Bihl+Wiedemann creates customized drive solutions with ASi for motorized rollers, DC motors and frequency inverters.

Drive
Number of Drives

"yes":

In the motor module UL approved fuses are placed before each of the motor supply connections. A short circuit in the motor causes this fuse to blow, protecting the connection cable between the module and motor.

After blowing the not exchangeable fuse the module is no longer functional and the module needs to be replaced. The characteristics of the fuse must be checked against the motor data before using the module.

The protection circuit in the module allows a very simple protection of the motor cables. The fuse for the cable protection is a slow-blow one; without short circuit the robust behavior of the module remains.


"no":

The motor module is designed to supply the 24 V directly to the motor. At high currents or surges as they occur for example at braking, the module will not be damaged.

The cable protection should be realized outside the motor module with additional measures.

Line protection fuse

Modules with a flat housing design and with cables which exit the sides make these ideal for installation in cable ducts, cable channels, cable troughs, cable rails or cable trays. Please note the respective housing depth for your particular installation.

Flat design, installation in cable duct possible
Inputs digital Outputs digital

inputs are supplied by ASi or by AUX (24 V or 48 V auxiliary power). If supplied by ASi, inputs shall not be connected to earth or to external potential.

Input voltage (sensor supply)

Electronic outputs are supplied by ASi or by AUX (24 V or 48 V auxiliary power). If supplied by ASi, outputs shall not be connected to earth or to external potential.

 

For relay outputs the relay contacts are initiated from ASi. The load circuit is powered externally as specified in the data sheet.

Output voltage (actuator supply)
Connection

Under normal conditions (no bus termination or repeater), the permissible total length of the ASi segment is max. 100 m. The calculation should take into consideration that the length of the connection cable (round cable) for each connected passive distributor must be doubled.

In the case of the active distributors (ASi modules) however only the one ASi profile cable is counted.

Round cable

The connection to ASi and AUX (24 V auxiliary power) is made for modules in the active distributor or blue IP67 housing via the yellow or black ASi profile cable with piercing technology or via an M12 plug. Modules for the control cabinet are connected via terminals and PCB modules via wiring pins, connection wires or terminals.


Line protection: If the module is supplied via a M12 connection with A or B coding, it may only be used with a current load of max. 4 A per pin in acc. with IEC 61076-2-101 and IEC 61076-2-109. A fused tap is recommended. There is no such limitation for modules supplied via piercing contacts.

ASi connection

Required profile that the ASi master needs to have in order to connect and operate the module.

Required Master profile

The node profiles allow numerous quickly configurable settings to be made on the module in order to optimally support the connected peripherals in most applications. The easiest way to select the node profiles is via the PC software.

If ID1 is in brackets (), this means it is the changeable default value; if ID1 is without brackets, it means it is a fixed, unchangeable value.

ASi node profile

Bihl+Wiedemann offers modules with AB address, single address or ASi-5 address. In some cases, ASi modules can occupy several (different) addresses. Mixed operation of modules with different addressing in the same ASi circuit is permitted.
For ASi modules with two ASi-3 nodes, the second ASi-3 node is turned off as long as the first ASi-3 node is addressed to address "0".
Upon request, ASi modules are available with specific ASi node profiles.

ASi address
Article No.
BWU1647
Cylindrical ASi Actuator in stainless steel
ASi-3 compatible
M18 sleeve in stainless steel, 55 mm
IP67
-
-
no
-
1
3 x electronic
out of ASi
out of ASi
1 x round cable/connecting wires
0,20 m
ASi via M12
M3 .. M4
S-9.A.E
1 AB address
BWU2038
IP65, 4 x M12, width: 90 mm
ASi-3 compatible
width: 90 mm
IP65
SEW MOVIMOT
1
no
no
2
no digital outputs
out of ASi
out of AUX
3 x M12 sockets, 5 poles
no
ASi profile cable
M3 .. M4
S-7.F.1.E
1 Single address
BWU3907
Active distributor ASi motor module
ASi-3 compatible
depth: 35 mm
IP67
Volta24 BLDC
1
no
yes, depth: 35 mm
1
no digital outputs
out of AUX
out of AUX
1 x M12 cable socket, straight, 8 poles
1 m
ASi profile cable
M4
S-7.A.(7).0
1 AB address
BWU3631
Active distributor ASi motor module
ASi-3 compatible
depth: 35 mm
IP67
SEW MOVIMOT
1
no
yes, depth: 35 mm
3
no digital outputs
out of ASi and out of AUX
out of AUX
1 x M12 cable socket, straight, 8 poles + 3 x M12 cable sockets, straight, 5 poles
I1: 1 m, I2...I4: 0,3 m
ASi profile cable
M0 ... M4
S-7.0.(F).E
1 Single address
BWU3783
Active distributor ASi motor module
ASi-3 compatible
depth: 35 mm
IP67
Lenze Smart Motor
1
no
yes, depth: 35 mm
3
no digital outputs
out of AUX
out of AUX
4 x M12 cable sockets, angled, 5 poles
M: 1,5 m, I: 2,5 m
ASi profile cable
M4
S-7.A.(7).E
1 AB address
BWU3840
IP67, 4 x M12
ASi-3 compatible
4 x M12
IP67
SEW MOVIMOT
1
no
no
2
no digital outputs
out of ASi
out of AUX
3 x M12 sockets, 5 poles
no
ASi profile cable
M3 .. M4
S-7.F.(F).E
1 Single address
BWU2765
IP67, 4 x M12
ASi-3 compatible
4 x M12
IP67
Interroll EC310, Itoh Denki PM500XC/XK, RULMECA RDR BL-2
2
yes, separately for each motor, 3,5 A (slow-blow fuse)
no
2
no digital outputs
out of ASi
out of AUX
4 x M12 sockets, 5 poles
no
ASi profile cable
M4
S-7.A.7.7
1 AB address
BWU2901
IP67, 4 x M12
ASi-3 compatible
4 x M12
IP67
Itoh Denki PM500XE/XP, Itoh Denki PM605XE/XP
2
yes, separately for each motor, 3,5 A (slow-blow fuse)
no
2
4 x electronic
out of ASi
out of AUX
4 x M12 sockets, 5 poles
no
ASi profile cable
M4
S-7.A.7.7
1 AB address
BWU2899
IP67, 8 x M12
ASi-3 compatible
8 x M12
IP67
Interroll EC310, Itoh Denki PM500XC/XK, Itoh Denki PM500XE/XP, Itoh Denki PM605XE/XP, RULMECA RDR BL-2
2
yes, separately for each motor, 3,5 A (slow-blow fuse)
no
4
4 x electronic
out of ASi
out of AUX
8 x M12 sockets, 5 poles
no
ASi profile cable
M4
S1-7.A.7.7, S2-7.5.(F).5
1 Single address + 1 AB address
BWU4377
IP67, 4 x M12, ASi-5
ASi-5 compatible
4 x M12
IP67
SEW MOVIMOT
1
no
no
4
no digital outputs
out of ASi
no output voltage
4 x M12 sockets, 5 poles
no
ASi profile cable
M5
depending on configuration
1 ASi-5 address
BWU3888
IP67, 8 x M12
ASi-3 compatible
8 x M12
IP67
24 V DC motors
2
no
no
4
4 x electronic
out of ASi
out of AUX
8 x M12 sockets, 5 poles
no
ASi profile cable
M4
S-7.A.7.
1 AB address
BWU4373
IP67, 4 x M12
ASi-3 compatible
depth: 42 mm
IP67
Lenze Smart Motor
1
no
no
4
3 x electronic
out of AUX
out of AUX
4 x M12 sockets, 5 poles
no
ASi profile cable
M4
S-7.A.(7).E
1 AB address
BWU4224
cable duct motor module
ASi-3 compatible
depth: 19 mm
IP54
Interroll EC310, Interroll EC5000 AI, 24 V (20 W/35 W), Itoh Denki PM500XC/XK, RULMECA RDR BL-2
2
yes, separately for each motor, 4,5 A (slow-blow fuse)
yes, depth: 19 mm
2
no digital outputs
out of ASi
out of AUX
2 x M8 snap-in cable sockets, straight, 5 poles + 2 x M8 cable sockets, straight, 4 poles
1 m
ASi profile cable
M4
S-7.A.7.7
1 AB address
BWU3290
cable duct motor module
ASi-3 compatible
depth: 19 mm
IP54
Interroll EC310, Interroll EC5000 AI, 24 V (20 W/35 W), Itoh Denki PM500XC/XK, RULMECA RDR BL-2
2
yes, separately for each motor, 4,5 A (slow-blow fuse)
yes, depth: 19 mm
2
no digital outputs
out of ASi
out of AUX
2 x M8 snap-in cable sockets, straight, 5 poles + 2 x M8 cable sockets, straight, 4 poles
M: 0,40 m, I: 0,06 m
ASi profile cable
M4
S-7.A.7.7
1 AB address
BW3409
cable duct motor module
ASi-3 compatible
depth: 19 mm
IP54
Interroll EC310, Interroll EC5000 AI, 24 V (20 W/35 W), Itoh Denki PM500XC/XK, RULMECA RDR BL-2
2
yes, separately for each motor, 4,5 A (slow-blow fuse)
yes, depth: 19 mm
2
no digital outputs
out of ASi
out of AUX
2 x M8 snap-in cable sockets, straight, 5 poles + 2 x M12 cable sockets, straight, 5 poles
M: 0,60 m, I: 1 m
ASi profile cable
M4
S-7.A.7.7
1 AB address
BW3813
cable duct motor module
ASi-3 compatible
depth: 19 mm
IP54
Interroll EC310, Itoh Denki PM500XC/XK, RULMECA RDR BL-2
2
yes, separately for each motor, 3,5 A (slow-blow fuse)
yes, depth: 19 mm
2
no digital outputs
out of ASi
out of AUX
2 x M8 snap-in cable sockets, straight, 5 poles + 2 x M12 cable sockets, straight, 5 poles
M: 0,60 m, I: 1 m
ASi profile cable
M4
S-7.A.7.7
1 AB address
BWU3278
cable duct motor module
ASi-3 compatible
depth: 19 mm
IP54
Itoh Denki PM500XE/XP, Itoh Denki PM605XE/XP
2
yes, separately for each motor, 3,5 A (slow-blow fuse)
yes, depth: 19 mm
4
no digital outputs
out of ASi
out of AUX
2 x M8 cable sockets, straight, 5 poles + 2 x M8 cable sockets, straight, 4 poles
M: 0,40 m, I: 0,06 m
ASi profile cable
M4
S-7.A.7.7
1 AB address
BWU3567
cable duct motor module
ASi-3 compatible
depth: 19 mm
IP54
Itoh Denki PM500XE/XP, Itoh Denki PM605XE/XP
2
yes, separately for each motor, 3,5 A (slow-blow fuse)
yes, depth: 19 mm
4
no digital outputs
out of ASi
out of AUX
2 x M8 cable sockets, straight, 5 poles + 2 x M8 cable sockets, straight, 4 poles
M: 0,40 m, I: 0,40 m
ASi profile cable
M4
S-7.A.7.7
1 AB address
BWU3679
cable duct motor module
ASi-3 compatible
depth: 19 mm
IP54
Itoh Denki PM500XE/XP, Itoh Denki PM605XE/XP
2
yes, separately for each motor, 3,5 A (slow-blow fuse)
yes, depth: 19 mm
4
no digital outputs
out of ASi
out of AUX
2 x M8 snap-in cable sockets, straight, 5 poles + 2 x M12 cable sockets, straight, 5 poles
M: 0,40 m, I: 0,06 m
ASi profile cable
M4
S-7.A.7.7
1 AB address
BW3452
passive cable duct motor module
-
depth: 18 mm
IP54
Itoh Denki PM500XE/XP, Itoh Denki PM605XE/XP
2
yes, separately for each motor, 3,5 A (slow-blow fuse)
yes, depth: 18 mm
2 x light barrier
no digital outputs
out of AUX
out of AUX
2 x M8 cable sockets, straight, 5 poles+ 1 x M8 cable plug, straight, 5 poles + 2 x M8 cable sockets, straight, 4 poles
M: 0,43 m, I: 0,09 m, AUX: 0,13 m
-
-
-
-