Logo Bihl+Wiedemann GmbH

Novità di prodotto

Outlook: M8 Modules – New housing family in the range of Bihl+Wiedemann

Bihl+Wiedemann has developed a new housing family: M8 Modules in protection rating IP67 e.g. BW3521

  • Increased number of sensors and actuators available with M8 connection for which adapters to M12 sockets used to be required
  • Same form factor as small housing of the M12 Modules (45 mm x 80 mm)
  • Equipped with 8 sockets: twice the amount of sockets in the same expanse as M12 Modules
  • Connection of AS-i and AUX using profile cable
  • Ideal for applications with limited space (e.g. robot arms)

Fig.: M8 Modules, optional with 3 poles M8 sockets (e.g. BW3521)

Safe coupling between PROFIsafe and CIP Safety

  •  protocols PROFIsafe and CIP Safety is now possible
  • Can be implemented with the AS-i 3.0 Gateways with integrated Safety Monitor BWU3367 and BWU3683 using Safe Link 
  • Up to 16 bytes can be sent
  • Automatic configuration using the configuration software ASIMON360
  • Simply select the Gateways in the software menu

Fig.: Safe coupling between PROFIsafe and CIP Safety with the AS-i Gateways with integrated Safety Monitor (BWU3367 and BWU3683)

Update of diagnostic software (BW2902)

  • Improvements in functionality and visual representation:
    • Revised user interface: optimized representation of the starting window and the window for interface settings
    • Introduction of test data as ring buffer, duration of the buffer memory can be set, maximum duration: 7 days
    • Reduced number of windows during a measurement as default in order to hide unnecessary information. Further information can be shown via option ‚extended view‘
    • Reduction of exclusion criteria for test runs
    • Error description and solution hints in a dedicated tab
    • Additional tab for warnings and information

Fig.: Update of diagnostic software (BW2902)

AS-i Safety Input Modules, IP20, 2SI ( BWU3671, BWU3696)

  • AUX (24 V auxiliary power)
  • Connection via 4 x COMBICON terminals
  • 22.5 mm wide n Protection rating IP20
  • BWU3671: 2 x 2 safe inputs for connecting:
    • 1 x complementary optoelectronic protective device
    • 1 x floating contact
  • BWU3696: 2 x 2 safe inputs for connecting:
    • 1 x optoelectronic protective device
    • 1 x floating contact

Fig.: AS-i Safety Input Modules, IP20, 2SI (BWU3671, BWU3696)

AS-i 3.0 EtherNet/IP+Modbus TCP Gateways with OPC UA Server (BWU3734, BWU3735, BWU3736)

  • EtherNet/IP, Modbus TCP and OPC UA in one device
  • OPC UA server as interface for OPC UA communication
  • New webserver for remote maintenance
  • Extremely fast: significantly improved cycle time over EthernetRPI < 1 ms, even with large data quantities
  • Integrated switch
  • Expanded diagnostic capabilities such as duplicate address detection, integrated earth fault and EMC monitor
  • Optional with integrated compact controller Control III, programming in C
  • Available as:
    • Single Master (BWU3734)
    • Double Master with 1 Power Supply for 1 AS-i network (BWU3735)
    • Double Master with 1 Power Supply for 2 AS-i networks (BWU3736)

Fig.: AS-i 3.0 EtherNet/IP+Modbus TCP Gateways with OPC UA Server (BWU3734, BWU3735, BWU3736)

AS-i 3.0 EtherNet/IP + Modbus TCP+OPC UA Gateway with integrated Safety Monitor (BWU3693)

  • EtherNet/IP, Modbus TCP and OPC UA in one unit
  • EtherNet/IP + Modbus TCP Master + OPC UA Slave
  • New webserver for remote maintenance
  • Extremely fast: significantly improved cycle time over Ethernet
  • RPI < 1 ms, even with large data quantities
  • AS-i 3.0 Gateway with integrated Safety Monitor and Safe Link
  • Double Master with 1 Power Supply for 2 AS-i networks
  • Integrated switch
  • 6 fast electronic safe outputs
  • Chip Card for storing configuration data
  • Variably configurable Assembly Object
  • 3 two-channel safe inputs built-in, expandable with up to 62 two-channel safe inputs
  • Applications up to SIL3, PLe

Fig.: AS-i 3.0 EtherNet/IP + Modbus TCP+OPC UA Gateway with integrated Safety Monitor (BWU3693)

Active Distributors AS-i for SEW MOVIMOT with binary control (BWU3605, BWU3631)

  • Motor Modules for control of SEW MOVIMOT drives with binary control
  • Especially flat form factor, can be installed in cable duct (35 mm deep)
  • Protection rating IP67
  • BWU3605:
    • Control of 1 x SEW MOVIMOT drive and up to 2 additional sensors
    • 3 digital inputs
    • 4 digital outputs
    • In- and output voltage provided from AUX (24 V auxiliary power)
    • Connection of AS-i and AUX using profile cable
    • Connection of periphery using 1 x round cable/connection leads and 2 x M12 cable sockets (straight, 5-pin)
  • BWU3631: Control of 1 x SEW MOVIMOT drive and up to 3 additional sensors
    • 4 digital inputs
    • 4 digital outputs 3 Input voltage provided from AUX (I1) and from AS-i (I2, I3, I4)
    • Output voltage provided from AUX (24 V auxiliary power)
    • Connection of AS-i and AUX using profile cable
    • Connection of periphery using 1 x M12 cable socket (straight, 8-pin) and 3 x M12 cable socket (straight, 5-pin)

 

 

Fig.: Active Distributors AS-i for SEW MOVIMOT with binary control (BWU3605, BWU3631)

Active Distributor AS-i for connecting Banner K50 Series EZ-LIGHT, type K50AP...F2Q (BWU3639)

  • Connection of Banner K50 Series EZLIGHT, type K50AP...F2Q to AS-i
  • Especially flat form factor, can be installed in cable duct (35 mm deep)
  • 1 digital input
  • 3 digital outputs
  • In- and output voltage provided from AS-i
  • Connection of AS-i using profile cable
  • Connection of periphery using 1 x M12 cable socket (right-angle, 8-pin)
  • Protection rating IP67

 

 

Fig.: Active Distributor AS-i for connecting Banner K50 Series EZ-LIGHT, type K50AP...F2Q (BWU3639)

Andrea Orsini

Tel: (+39) 347 199 66 40

E-Mail:  aorsini@bihl-wiedemann.it

 

 

Vai al modulo di contatto

 

Avete delle domande e soluzioni da proporre sui nostri prodotti e desiderate essere richiamati telefonicamente? Saremo lieti di chiamarvi nel momento che desiderate.

 

Chiedi di essere richiamato

Hotline:

Andrea Orsini

Tel: (+39) 347 199 66 40

 

E-Mail:

supportbihl-wiedemann.it

 

Links & Risorse:

Contatti E-Mail

Downloads

Andrea Orsini

Tel: (+39) 347 199 66 40

E-Mail:  aorsini@bihl-wiedemann.it

 

 

Vai al modulo di contatto

 

Avete delle domande e soluzioni da proporre sui nostri prodotti e desiderate essere richiamati telefonicamente? Saremo lieti di chiamarvi nel momento che desiderate.

 

Chiedi di essere richiamato

Hotline:

Andrea Orsini

Tel: (+39) 347 199 66 40

 

E-Mail:

supportbihl-wiedemann.it

 

Links & Risorse:

Contatti E-Mail

Downloads