Active Distributors ASi - Bihl+Wiedemann GmbH

Active distributors ASi from Bihl+Wiedemann allow you to make any sensor or actuator AS-Interface capable. Even modules without their own ASi terminal can be easily integrated into an existing ASi network using these active distributors ASi. Other features include individually configurable connection options using M8 or M12 connectors, flying leads or push-in termimals to conform to the customer’s application, as well as a compact form factor, making them ideal for use in cable ducts.

Product selector Video (2:09 min) Application

Active Distributors ASi, IP67/IP54

up to 8 cable connections
round cable/connecting wires
ASi addressing cable socket
M8 cable sockets, straight
M12 cable sockets, straight/angled

Figure

Inputs digital

Outputs digital

inputs are supplied by ASi or by AUX (auxiliary 24 V power). If supplied by ASi, inputs shall not be connected to earth or to external potential.

Input voltage (sensor supply)

Electronic outputs are supplied by ASi or by AUX (auxiliary 24 V power). If supplied by ASi, outputs shall not be connected to earth or to external potential.

For relay outputs the relay contacts are initiated from ASi. The load circuit is powered externally as specified in the data sheet.

Output voltage (actuator supply)

PUR line, oil resistant. Further connection options are available on request.

M12 socket	M12 cable socket, angled	M12 cable socket, straight	M8 cable socket, straight	round cable/connecting wires			profile cable branch	push in terminals

2 x round cables/connecting wires 2,5 mm²

Connection

Single wiring: 1 input or output per connection.

Y wiring: 2 inputs or outputs per connection.

Mixed wiring: 1 input and 1 output per connection.

Exact pin assignment see data sheet.

M8/M12 wiring

Under normal conditions (no bus termination or repeater), the permissible total length of the ASi segment is max. 100 m. The calculation should take into consideration that the length of the connection cable (round cable) for each connected passive distributor must be doubled.

In the case of the active distributors (ASi modules) however only the one ASi profile cable is counted.

Round cable

Modules with a flat housing design and with cables which exit the sides make these ideal for installation in cable ducts, cable channels, cable troughs, cable rails or cable trays. Please note the respective housing depth for your particular installation.

Flat design, installation in cable duct possible

Profile cable connection

AB address (max. 62 AB addresses/ASi network), 2 AB addresses (max. 31 modules with 2 AB addresses), Single addresses (max. 31 Single addresses/ASi network), ASi-5 address (max. 62 ASi-5 addresses/ASi network), mixed use allowed.
For ASi modules with two ASi nodes the second Asi node is turned off as long as the first Asi node is addressed to address "0".
Upon request, ASi modules are available with specific ASi node profiles.

ASi address

Special function

Article No.

4

4 x electronic

out of ASi

out of AUX

8 x M12 cable sockets, straight, 5 poles + 1 x ASi addressing cable socket

Single

I1/O4: 0,35 m, I2/O3: 0,25 m, I3/O2: 0,15 m, I4/O1: 0,05 m

yes, depth: 35 mm

1 x ASi, 1 x AUX 24 V

1 AB address

-

BWU3675

4

4 x electronic

out of AUX

3 x M12 cable sockets, straight, 5 poles + 2 x M8 snap-in cable sockets, straight, 4 poles + 1 x ASi addressing cable socket

-

I1/I2: 0,1 m, I3/I4: 0,3 m, O1/O2: 0,2 m, O3/O4: 0,3 m

yes, depth: 35 mm

1 x ASi

1 AB address

-

BWU3676

4

4 x electronic

out of ASi

out of AUX

4 x M12 cable sockets, straight, 5 poles

Single

2 m

yes, depth: 35 mm

1 x ASi, 1 x AUX 24 V

1 AB address

-

BWU3786

4

2 x electronic

out of ASi

6 x M8 cable sockets, straight, 4 poles

-

I: 0,15 m, O: 0,50 m

yes, depth: 35 mm

1 x ASi

1 AB address

optimized to control valves Festo CPE14 / VUVG-L14 via ASi

BWU3577

4

4 x electronic

out of ASi

out of AUX

4 x M8 cable sockets, straight, 4 poles

Y

0,20 m

yes, depth: 35 mm

1 x ASi, 1 x AUX 24 V

1 AB address

-

BWU3555

2

2 x electronic

out of ASi

2 x M12 cable sockets, straight, 5 poles + 2 x M8 cable socket, straight, 3 poles

Single

I: 0,20 m, O: 0,40 m

yes, depth: 35 mm

1 x ASi

1 AB address

-

BWU3695

4

-

out of ASi

-

4 x M12 cable sockets, straight, 5 poles

Single

2 m

yes, depth: 35 mm

1 x ASi

1 AB address

-

BWU3633

4

-

out of ASi

-

4 x M12 cable sockets, straight, 5 poles

Single

0,30 m

yes, depth: 35 mm

1 x ASi

1 AB address

-

BWU3632

4

-

out of ASi

-

4 x M12 cable socket, straight, 5 poles + 1 x ASi addressing cable socket

Single

I1: 0,35 m, I2: 0,25 m, I3: 0,15 m, I4: 0,05 m

yes, depth: 35 mm

1 x ASi

1 AB address

-

BWU3730

4

-

out of AUX

-

3 x round cable/connecting wires + 1 x M8 cable socket, straight, 4 poles

-

1 m

yes, depth: 35 mm

-

1 AB address

-

BWU3608

up to 4, depending on configuration

up to 4 x electronic, depending on configuration

out of AUX

2 x M12 cable sockets, straight, 5 poles

Y/mixed, depending on configuration

1 m

yes, depth: 35 mm

1 x ASi, 1 x AUX 24 V

1 AB address

-

BWU4727

4

4 x electronic

out of ASi

out of AUX

4 x round cable/connecting wires

-

1 m

yes, depth: 35 mm

1 x ASi, 1 x AUX 24 V

1 AB address

-

BWU4172

4

4 x electronic

out of ASi

out of AUX

2 x round cables/connecting wires

-

1 m

yes, depth: 35 mm

1 x ASi, 1 x AUX 24 V

1 AB address

-

BWU3317

4

4 x electronic

out of ASi

out of AUX

2 x M12 cable sockets, straight, 5 poles

-

1 m

yes, depth: 35 mm

1 x ASi, 1 x AUX 24 V

1 AB address

-

BW3507

4

4 x electronic

out of ASi

2 x round cables/connecting wires

-

1 m

yes, depth: 35 mm

1 x ASi

1 AB address

-

BWU3326

3

4 x electronic

out of AUX

2 x M12 cable sockets, straight, 5 poles

-

X1: 0,25 m, X2: 2 m

yes, depth: 35 mm

1 x ASi, 1 x AUX 24 V

1 AB address

to connect K50Pro Banner Stacklight to ASi

BWU3785

4

-

out of ASi

-

2 x round cables/connecting wires

-

5 m

yes, depth: 35 mm

1 x ASi

1 AB address

-

BWU4923

4

-

out of ASi

-

2 x round cables/connecting wires

-

0,50 m

yes, depth: 35 mm

1 x ASi

1 AB address

-

BWU3374

1

4 x electronic

out of ASi

1 x M12 cable socket, straight, 5 poles + 1 x M12 cable socket, angled, 5 poles

-

0,30 m

yes, depth: 35 mm

1 x ASi

1 AB address

to connect Banner K50 Series EZ-Light, type K50L...PQ + Wenglor light curtains Pick-to-Light

BWU3534

-

4 x electronic

-

out of ASi

1 x round cable/connecting wires + 1 x ASi addressing cable socket

-

4 m

yes, depth: 35 mm

1 x ASi

1 AB address

-

BWU3729

4

4 x electronic

out of ASi

1 x round cable/connecting wires

-

5 m

yes, depth: 35 mm

1 x ASi

1 AB address

-

BW3500

4

4 x electronic

out of ASi

1 x round cable/connecting wires

-

2 m

yes, depth: 35 mm

-

1 AB address

to connect Stack-Light Banner TL50GYRAQ + audible alarm (180 mA) to ASi

BWU3606

4

4 x electronic

out of AUX

1 x M12 cable socket, straight, 8 poles

-

1 m

yes, depth: 35 mm

1 x ASi, 1 x AUX 24 V

1 AB address

to connect Euchner MGB to ASi

BW3377

2

2 x electronic

out of AUX

1 x M12 cable socket, straight, 8 poles

-

1 m

yes, depth: 35 mm

1 x ASi, 1 x AUX 24 V

1 AB address

to control Linak LA12 drives

BWU4784

2

2 x electronic

out of AUX

1 x round cable/connecting wires

-

3 m

yes, depth: 35 mm

1 x ASi, 1 x AUX 24 V

1 AB address

to control Linak LA12 drives

BWU3607

1

3 x electronic

out of ASi

1 x M12 cable socket, angled, 8 poles

-

0,30 m

yes, depth: 35 mm

1 x ASi

1 AB address

to connect Banner K50 Series EZ-LIGHT, Typ K50AP...F2Q to ASi

BWU3639

4

-

out of AUX

-

2 x M12 cable sockets, straight, 5 poles

Y

0,40 m

yes, depth: 19 mm

1 x ASi, 1 x AUX 24 V

1 AB address

-

BWU3498

2

2 x electronic

out of AUX

1 x round cable/connecting wires + 1 x M12 cable sockets, straight, 5 poles

Y

I: 0,4 m, O: 1,5 m

yes, depth: 19 mm

1 x ASi, 1 x AUX 24 V

1 AB address

-

BWU3628

2

2 x electronic

out of AUX

2 x M12 cable sockets, straight, 5 poles

Y

0,40 m

yes, depth: 19 mm

1 x ASi, 1 x AUX 24 V

1 AB address

-

BWU3497

2

2 x electronic

out of AUX

2 x round cables/connecting wires

-

1 m

yes, depth: 19 mm

1 x ASi, 1 x AUX 24 V

1 AB address

-

BWU3602

2

1 x electronic

out of AUX

1 x M12 cable socket, straight, 5 poles + 1 x round cable/connecting wires

Single

1 m

yes, depth: 19 mm

1 x ASi, 1 x AUX 24 V

1 AB address

-

BWU4879

2

1 x electronic

out of AUX

2 x M12 cable sockets, angled, 5 poles

1 x Y + 1 x Mixed

1 m

yes, depth: 19 mm

1 x ASi, 1 x AUX 24 V

1 AB address

-

BWU3250

2

2 x electronic

out of ASi

1 x M12 cable socket, straight, 8 poles

-

1 m

yes, depth: 19 mm

1 x ASi

1 AB address

-

BWU3400

2

-

out of ASi

-

1 x M12 cable socket, angled, 5 poles

Y

1 m

yes, depth: 19 mm

1 x ASi

1 AB address

-

BWU3642

2

-

out of AUX

-

1 x M12 cable socket, angled, 5 poles

Y

1 m

yes, depth: 19 mm

1 x ASi, 1 x AUX 24 V

1 AB address

-

BWU3564

-

4 x electronic

-

out of AUX

1 x round cable/connecting wires

-

1 m

yes, depth: 19 mm

1 x ASi, 1 x AUX 24 V

1 AB address

-

BW3300

-

4 x electronic

-

out of AUX

1 x round cable/connecting wires

-

5 m

yes, depth: 19 mm

1 x ASi, 1 x AUX 24 V

1 AB address

-

BWU3487

-

4 x electronic

-

out of AUX

1 x round cable/connecting wires

-

3 m

yes, depth: 19 mm

1 x ASi, 1 x AUX 24 V

1 AB address

-

BWU4766

-

4 x electronic

-

out of AUX

1 x M12 cable socket, straight, 5 poles

-

5 m

yes, depth: 19 mm

1 x ASi, 1 x AUX 24 V

1 AB address

-

BWU3788

-

4 x electronic

-

out of AUX

1 x M12 cable socket, straight, 5 poles

-

3 m

yes, depth: 19 mm

1 x ASi, 1 x AUX 24 V

1 AB address

-

BWU3712

-

4 x electronic

-

out of AUX

1 x M12 cable socket, straight, 5 poles

-

10 m

yes, depth: 19 mm

1 x ASi, 1 x AUX 24 V

1 AB address

-

BWU4763

-

4 x electronic

-

out of AUX

1 x M12 cable socket, straight, 5 poles

-

2 m

yes, depth: 19 mm

1 x ASi, 1 x AUX 24 V

1 AB address

to connect general-purpose display banner K50 Pro to ASi

BWU4087

Active Distributor ASi, IP20

8 x push in teminals
wire section max. 0,5 mm²/AWG20

Figure

Inputs digital

Outputs digital

inputs are supplied by ASi or by AUX (auxiliary 24 V power). If supplied by ASi, inputs shall not be connected to earth or to external potential.

Input voltage (sensor supply)

Electronic outputs are supplied by ASi or by AUX (auxiliary 24 V power). If supplied by ASi, outputs shall not be connected to earth or to external potential.

For relay outputs the relay contacts are initiated from ASi. The load circuit is powered externally as specified in the data sheet.

Output voltage (actuator supply)

PUR line, oil resistant. Further connection options are available on request.

M12 socket	M12 cable socket, angled	M12 cable socket, straight	M8 cable socket, straight	round cable/connecting wires			profile cable branch	push in terminals

2 x round cables/connecting wires 2,5 mm²

Connection

Modules with a flat housing design and with cables which exit the sides make these ideal for installation in cable ducts, cable channels, cable troughs, cable rails or cable trays. Please note the respective housing depth for your particular installation.

Flat design, installation in cable duct possible

Profile cable connection

AB address (max. 62 AB addresses/ASi network), 2 AB addresses (max. 31 modules with 2 AB addresses), Single addresses (max. 31 Single addresses/ASi network), ASi-5 address (max. 62 ASi-5 addresses/ASi network), mixed use allowed.
For ASi modules with two ASi nodes the second Asi node is turned off as long as the first Asi node is addressed to address "0".
Upon request, ASi modules are available with specific ASi node profiles.

ASi address

Article No.

4

-

out of AUX

-

8 x push in terminals

yes, depth: 19 mm

1 x ASi, 1 x AUX 24 V

1 AB address

BWU3349

3

1 x electronic

out of AUX

8 x push in terminals

yes, depth: 19 mm

1 x ASi, 1 x AUX 24 V

1 AB address

BWU3414

-

4 x electronic

-

out of AUX

8 x push in terminals

yes, depth: 19 mm

1 x ASi, 1 x AUX 24 V

1 AB address

BWU3342

ASi Slaves/IO-Link Master: Active Distributors, IP67

IO-Link ports class A
IO-Link ports class B

Figure

Model

Number of IO-Link Ports

Port class A (M12): Pin 4 configurable (IO-Link/DI/DO), additional digital input at pin 2. Compatible with 3 pol IO-Link devices (M8).

Configurable conectors: Terminal assignment (C/Q, L+, L-, I) compatible with pin assigment of IO-Link port class A (M12). Connected IO-Link devices with port class B (M12) with a higher current consumption have to be supplied directly via a separate power supply. Compatible with 3 pol IO-Link devices (M8).

IO-Link Port Class A

Port class B (M12): Pin 4 configurable (IO-Link/DI/DO), additional power supply (galvanically isolated) for IO-Link devices at pins 2 and 5. Compatible with 3 pol IO-Link devices (M8).

Configurable conectors: Terminal assignment (C/Q, L+, L-, I) compatible with pin assigment of IO-Link port class A (M12). Connected IO-Link devices with port class B (M12) with a higher current consumption have to be supplied directly via a separate power supply. Compatible with 3 pol IO-Link devices (M8).

IO-Link Port Class B

IO-Link and additional inputs/outputs are supplied by ASi or by AUX (auxiliary 24 V power). If supplied by ASi, inputs can neither be connected to earth nor to external potential.

Sensor supply (IO-Link supply and input/output supply)

Connection via M12: For IO-Link ports class B the supply of actuators is provided by an additional (galvanically isolated) power supply by AUX (auxiliary 24 V power) via Pin 2 (P24) and Pin 5 (N24).

Connection via clamps: If connected IO-Link Devices with IO-Link ports class B need a higher current consumption, additionally they can be supplied directly via the power supply.

Actuator supply (for IO-Link ports class B)

PUR line, oil resistant. Further connection options are available on request.

M12 socket	M12 cable socket, angled	M12 cable socket, straight	M8 cable socket, straight	round cable/connecting wires			profile cable branch	push in terminals

2 x round cables/connecting wires 2,5 mm²

Connection

Under normal conditions (no bus termination or repeater), the permissible total length of the ASi segment is max. 100 m. The calculation should take into consideration that the length of the connection cable (round cable) for each connected passive distributor must be doubled.

In the case of the active distributors (ASi modules) however only the one ASi profile cable is counted.

Round cable

COM1 = 4.8 kBaud

COM2 = 38.4 kBaud

COM3 = 230.4 kBaud (optional according to Specification V1.0)

An IO-Link device supports only one of the defined data transmission rates.

According to Specification V1.1, the IO-Link master supports all data transmission rates and adapts itself automatically to the data transmission rate supported by the device.

IO-Link data rate

IO-Link specification

Modules with a flat housing design and with cables which exit the sides make these ideal for installation in cable ducts, cable channels, cable troughs, cable rails or cable trays. Please note the respective housing depth for your particular installation.

Flat design, installation in cable duct possible

Profile cable connection

AB address (max. 62 AB addresses/ASi network), 2 AB addresses (max. 31 modules with 2 AB addresses), Single addresses (max. 31 Single addresses/ASi network), ASi-5 address (max. 62 ASi-5 addresses/ASi network), mixed use allowed.
For ASi modules with two ASi nodes the second Asi node is turned off as long as the first Asi node is addressed to address "0".
Upon request, ASi modules are available with specific ASi node profiles.

ASi address

Article No.

ASi module with integrated IO-Link master

2

1

out of AUX

2 x M12 cable sockets, straight, 5 poles

1 m

COM1 / COM2 / COM3

V1.1

yes, depth: 35 mm

1 x ASi, 1 x AUX 24 V

1 ASi-5 address

BWU4077

ASi module with integrated IO-Link master

1

-

out of ASi

-

1 x M12 cable socket, straight, 5 poles

1 m

COM1 / COM2 / COM3

V1.1

yes, depth: 35 mm

1 x ASi

1 ASi-5 address

BWU4748

ASi module with integrated IO-Link master

1

-

1

out of AUX

1 x M12 cable socket, straight, 5 poles

1 m

COM1 / COM2 / COM3

V1.1

yes, depth: 35 mm

1 x ASi, 1 x AUX 24 V

1 ASi-5 address

BWU4088

Active Distributors ASi-5, IP67, RGB Lights and RGB/RGBW Stripes

2 x connectors for profile cable
round cable/connecting wires
M8 cable sockets, straight

Figure

Inputs digital

Outputs digital

inputs are supplied by ASi or by AUX (auxiliary 24 V power). If supplied by ASi, inputs shall not be connected to earth or to external potential.

Input voltage (sensor supply)

Electronic outputs are supplied by ASi or by AUX (auxiliary 24 V power). If supplied by ASi, outputs shall not be connected to earth or to external potential.

For relay outputs the relay contacts are initiated from ASi. The load circuit is powered externally as specified in the data sheet.

Output voltage (actuator supply)

PUR line, oil resistant. Further connection options are available on request.

M12 socket	M12 cable socket, angled	M12 cable socket, straight	M8 cable socket, straight	round cable/connecting wires			profile cable branch	push in terminals

2 x round cables/connecting wires 2,5 mm²

Connection

Single wiring: 1 input or output per connection.

Y wiring: 2 inputs or outputs per connection.

Mixed wiring: 1 input and 1 output per connection.

Exact pin assignment see data sheet.

M8/M12 wiring

Under normal conditions (no bus termination or repeater), the permissible total length of the ASi segment is max. 100 m. The calculation should take into consideration that the length of the connection cable (round cable) for each connected passive distributor must be doubled.

In the case of the active distributors (ASi modules) however only the one ASi profile cable is counted.

Round cable

Modules with a flat housing design and with cables which exit the sides make these ideal for installation in cable ducts, cable channels, cable troughs, cable rails or cable trays. Please note the respective housing depth for your particular installation.

Flat design, installation in cable duct possible

Profile cable connection

AB address (max. 62 AB addresses/ASi network), 2 AB addresses (max. 31 modules with 2 AB addresses), Single addresses (max. 31 Single addresses/ASi network), ASi-5 address (max. 62 ASi-5 addresses/ASi network), mixed use allowed.
For ASi modules with two ASi nodes the second Asi node is turned off as long as the first Asi node is addressed to address "0".
Upon request, ASi modules are available with specific ASi node profiles.

ASi address

Special function

Article No.

-

1 x RGB Light

-

out of AUX

1 x M8 cable socket, straight, 4 poles

-

1 m

yes, depth: 35 mm

1 x ASi, 1 x AUX 24 V

1 ASi-5 address

-

BWU4083

-

1 x RGB/RGBW LED Stripe

-

out of AUX

1 x round cable/connecting wires

-

0,20 m

yes, depth: 35 mm

1 x ASi, 1 x AUX 24 V

1 ASi-5 address

-

BWU4101

User login

Active Distributors ASi, IP67/IP54

Active Distributor ASi, IP20

ASi Slaves/IO-Link Master: Active Distributors, IP67

Active Distributors ASi-5, IP67, RGB Lights and RGB/RGBW Stripes