BW4760Passive Distributor AUX, 1 x M12 cable plug, straight, 4 poles, to 1 x AUX profile cable, depth 19 mm, IP67

  • integrated test pulse suppression
  • optimized for load currents from 5 to 100 mA


Product information

  • Logo_CE

Product description

Passive Distributor AUX, housing depth 19 mm, IP67, connection via 1 x M12 cable plug, straight, 4 poles, cable length 0,3 m, to 1 x AUX profile cable, flat design, installation in cable duct possible (installation depth ≥ 19 mm), to create a safety-switched 24 V AUX branch to profile cable, optimized for load current ≤100 mA

Technical data

Type Passive distributor AUX
Profile cable connection

The module has connections for ASi and/or AUX profile cables to supply data and (auxiliary) power. Depending on the design, the devices also have an integrated profile cable derivation.

1 x AUX 24 V
Connection 1 x M12 cable plug, straight, 4 poles
Internal fuse

Interchangeable, self-resetting or slow-blow fuses are available.

no
Round cable

Under normal conditions (no bus termination or repeater), the permissible total length of the ASi segment is max. 100 m. The calculation should take into consideration that the length of the connection cable (round cable) for each connected passive distributor must be doubled.

In the case of the active distributors (ASi modules) however only the one ASi profile cable is counted.

0,30 m
Flat design, installation in cable duct possible

Modules with a flat housing design and with cables which exit the sides make these ideal for installation in cable ducts, cable channels, cable troughs, cable rails or cable trays. Please note the respective housing depth for your particular installation.

yes, depth: 19 mm
Housing depth: 19 mm
LED status display

Display of the status of the inputs/outputs, ASi communication or peripheral errors and the status of the AUX supply according to the ASi specification.

no
Protection rating

"IP20":
Protected against solid foreign bodies having a diameter of 12.5 mm or larger and against finger contact, not protected against water.


"IP40":

Protected against solid foreign bodies having a diameter of 1.0 mm or larger, protected against access with a wire, no protection against water.

"IP54":

Protection against dust in damaging amounts, complete protection against contact, protection against splashing water in any angle.


"IP65":
Dust-tight, full protection against contact, protection against spray water (jet) from any angle.

"IP67":

Dust-tight, full protection against contact, protection against temporary immersion.

IP67
Special function for switching loads ≤100 mA