BWU4083Active Distributor ASi-5, IP67, 1 RGB Light

Product description

Active distributor ASi-5, IP67, housing depth 35 mm, 1 output for RGB light (3 x PWM outputs 0...24V, NPN), output voltage/actuator supply out of AUX, periphery connection via 1 x M8 cable socket, straight, 4 poles, cable length 1 m, flat design, installation in cable duct possible (installation depth ≥35 mm), LED, connectors for 1 x ASi and 1 x AUX profile cable, ASi connection via profile cable and piercing technology, 1 AS-5 address


To connect 1 RGB light to ASi. Separate control of RGB color channels via 3 analog outputs 0...24V (PWM, NPN).

Technical data

Inputs digital no digital inputs
Outputs digital 1 x RGB Light
Input voltage (sensor supply)

inputs are supplied by ASi or by AUX (24 V or 48 V auxiliary power). If supplied by ASi, inputs shall not be connected to earth or to external potential.

no input voltage
Output voltage (actuator supply)

Electronic outputs are supplied by ASi or by AUX (24 V or 48 V auxiliary power). If supplied by ASi, outputs shall not be connected to earth or to external potential.

 

For relay outputs the relay contacts are initiated from ASi. The load circuit is powered externally as specified in the data sheet.

out of AUX
Connection 1 x M8 cable socket, straight, 4 poles
Round cable

Under normal conditions (no bus termination or repeater), the permissible total length of the ASi segment is max. 100 m. The calculation should take into consideration that the length of the connection cable (round cable) for each connected passive distributor must be doubled.

In the case of the active distributors (ASi modules) however only the one ASi profile cable is counted.

1 m
Flat design, installation in cable duct possible

Modules with a flat housing design and with cables which exit the sides make these ideal for installation in cable ducts, cable channels, cable troughs, cable rails or cable trays. Please note the respective housing depth for your particular installation.

yes, depth: 35 mm
ASi address

Bihl+Wiedemann offers modules with AB address, single address or ASi-5 address. In some cases, ASi modules can occupy several (different) addresses. Mixed operation of modules with different addressing in the same ASi circuit is permitted.
For ASi modules with two ASi-3 nodes, the second ASi-3 node is turned off as long as the first ASi-3 node is addressed to address "0".
Upon request, ASi modules are available with specific ASi node profiles.

1 ASi-5 address
Special function no special function

How to troubleshoot an existing ASi installation

Manuals

    The product has earned the following certifications: