FairsLicensingLogin
Cart (0) Back to Shop
Logo Bihl+Wiedemann GmbH
FairsLicensingLogin +45 70 27 60 20

Circuit Board Modules

Circuit board modules enable sensor and actuator OEMs the possibility of making their modules ASi capable with the help of a fully engineered and certified ASi slave board which can be simply and easily integrated into the respective device. Here Bihl+Wiedemann offers a wide range of PCB modules which are available with various connection options and either potted or un-potted. On request Bihl+Wiedemann can also offer cost-effective modified versions or new developments based on a kit system.

 

Product selector 

E/A Digital Modules: Circuit Board Modules ASi, PCB Solutions

  • Special variants on request
Figure Type

2 holes for assembly angles.

Circuit board dimensions 		Inputs digital Outputs digital

further connection options are available on request.

screw terminalswiring pins, angled
(pins 180° to PCB)		wiring  pins, straight
(pins 90° to PCB)		solder lugssocketsplug-in spring-type /
screw terminals		   connecting wires
PCB connection

Coating protects components and circuit boards when touched.

   thin coated   thick coated
Coating

status of in- and outputs is indicated by LEDs. In addition to that, both ASi LEDs (PWR green and FAULT red) show as usual regarding the ASi Slaves- the status of the ASi Slaves. Uaux is indicated by a green LED.

LED status display

inputs are supplied by ASi or by AUX (auxiliary 24 V power). If supplied by ASi, inputs shall not be connected to earth or to external potential.

Input voltage (sensor supply)

Electronic outputs are supplied by ASi or by AUX (auxiliary 24 V power). If supplied by ASi, outputs shall not be connected to earth or to external potential.

 

For relay outputs the relay contacts are initiated from ASi. The load circuit is powered externally as specified in the data sheet.

Output voltage (actuator supply)

The connection to ASi as well to AUX (auxiliary 24 V power) is made via yellow resp. black ASi profile cable with piercing technology or via M12 socket (in IP20 via clamps).


Line protection: If the module is supplied via a M12 connection with A or B coding, it may only be used with a current load of max. 4 A per pin in acc. with IEC 61076-2-101 and IEC 61076-2-109. A fused tap is recommended. There is no such limitation for modules supplied via piercing contacts.

ASi connection

AB Slave (max. 62 AB Slaves/ASi network), 2 AB Slaves (max. 31 modules with 2 AB Slaves), Single Slaves (max. 31 Single Slaves/ASi network), ASi-5 Slave (max. 62 ASi-5 Slaves/ASi network), mixed use allowed.
For modules with two slaves the second slave is turned off as long as the first slave is addressed to address "0".
Upon request, slaves are available with specific ASi Slave profiles.

ASi address 		Article No.
BWR1566circuit board 29,7 mm x 36,5 mm29,7 mm x 36,5 mm11 x electronicwiring pins, straightnonoout of ASiout of ASiwiring pin, straight1 AB SlaveBWR1566
BWR1421circuit board 29,7 mm x 36,5 mm29,7 mm x 36,5 mm22 x electronicsolder lugsnonoout of ASiout of ASisolder lugs1 AB SlaveBWR1421
BWR3189circuit board 29,7 mm x 36,5 mm29,7 mm x 36,5 mm22 x electronicwiring pins, straightnonoout of ASiout of ASiwiring pin, straight1 AB SlaveBWR3189
BWR1957circuit board 29,7 mm x 36,5 mm29,7 mm x 36,5 mm22 x electronicsolder lugs, screw terminals only at ASi pinsnonoout of ASiout of ASiscrew terminals1 AB SlaveBWR1957
BWR2782circuit board 29,7 mm x 36,5 mm29,7 mm x 36,5 mm22 x electronicscrew terminalsnonoout of ASiout of ASiscrew terminals1 AB Slave, ASi Slave Profile S-7.A.7.EBWR2782
BWR1443circuit board 29,7 mm x 36,5 mm29,7 mm x 36,5 mm22 x electronicscrew terminalsnonoout of ASiout of ASiscrew terminals1 AB SlaveBWR1443
BWR2393circuit board 29,7 mm x 36,5 mm29,7 mm x 36,5 mm2 (inputs mirrored)2 x electronicscrew terminalsthin coatednoout of ASiout of ASiscrew terminals1 AB SlaveBWR2393
BWR1408circuit board 73 mm x 37,5 mm73 mm x 37,5 mm43 x electronicsolder lugsnonoout of ASiout of ASisolder lugs1 AB SlaveBWR1408
BWR1682circuit board 73 mm x 37,5 mm73 mm x 37,5 mm43 x electronicsolder lugsnoyesout of ASiout of AUXsolder lugs1 AB SlaveBWR1682
BWR2229circuit board 73 mm x 37,5 mm73 mm x 37,5 mm43 x electronicplug-in spring-type terminalsnonoout of ASiout of ASiplug-in spring-type terminals1 AB SlaveBWR2229
BWR1387circuit board 73 mm x 37,5 mm73 mm x 37,5 mm43 x electronicscrew terminalsnonoout of ASiout of ASiscrew terminals1 AB SlaveBWR1387
BWR1386circuit board 73 mm x 37,5 mm73 mm x 37,5 mm43 x electronicwiring pins, anglednonoout of ASiout of ASiwiring pin, angled1 AB SlaveBWR1386
BWR2052circuit board 73 mm x 37,5 mm73 mm x 37,5 mm44 x electronicsolder lugsnonoout of ASiout of ASisolder lugs1 Single SlaveBWR2052
BWR1468circuit board 73 mm x 37,5 mm73 mm x 37,5 mm44 x electronicsolder lugsnoyesout of ASiout of ASisolder lugs1 Single SlaveBWR1468
BWR2442circuit board 73 mm x 37,5 mm73 mm x 37,5 mm44 x electronicsolder lugsnoyesout of ASiout of AUXsolder lugs1 AB SlaveBWR2442
BWR3116circuit board 73 mm x 37,5 mm73 mm x 37,5 mm44 x electronicsocketsnonoout of ASiout of ASisockets1 AB SlaveBWR3116
BWR2597circuit board 73 mm x 37,5 mm73 mm x 37,5 mm44 x electronicconnecting wires, 200 mmthick coatedyesout of ASiout of ASiconnecting wires, 200 mm1 Single SlaveBWR2597
BWR2571circuit board 73 mm x 37,5 mm73 mm x 37,5 mm44 x electronicconnecting wires, 200 mmthick coatedyesout of ASiout of ASiconnecting wires, 200 mm1 AB SlaveBWR2571
BWR1218circuit board 73 mm x 37,5 mm73 mm x 37,5 mm44 x electronicwiring pins, anglednonoout of ASiout of ASiwiring pin, angled1 Single SlaveBWR1218
BWR2591circuit board 73 mm x 37,5 mm73 mm x 37,5 mm44 x electronicwiring pins, anglednoyesout of ASiout of AUXwiring pin, angled1 Single SlaveBWR2591
BWR3215circuit board 73 mm x 37,5 mm73 mm x 37,5 mm44 x electronicwiring pins, angledthin coatedyesout of AUXout of AUXwiring pin, angled1 AB SlaveBWR3215
BWR3214circuit board 73 mm x 37,5 mm73 mm x 37,5 mm44 x electronicwiring pins, straightthin coatedyesout of AUXout of AUXwiring pin, straight1 AB SlaveBWR3214
BWR3213circuit board 73 mm x 37,5 mm73 mm x 37,5 mm44 x electronicwiring pins, straightthick coatedyesout of AUXout of AUXwiring pin, straight1 AB SlaveBWR3213
BWR1889circuit board 73 mm x 37,5 mm73 mm x 37,5 mm44 x electronicplug-in spring-type terminalsnonoout of ASiout of ASiplug-in spring-type terminals1 AB SlaveBWR1889
BWR1219circuit board 73 mm x 37,5 mm73 mm x 37,5 mm44 x electronicscrew terminalsnonoout of ASiout of ASiscrew terminals1 Single SlaveBWR1219
BWR1389circuit board 73 mm x 37,5 mm73 mm x 37,5 mm44 x electronicscrew terminalsnonoout of AUXout of AUXscrew terminals1 Single SlaveBWR1389
BWR1470circuit board 73 mm x 37,5 mm73 mm x 37,5 mm44 x electronicscrew terminalsnoyesout of ASiout of ASiscrew terminals1 Single SlaveBWR1470
BWR1628circuit board 73 mm x 37,5 mm73 mm x 37,5 mm44 x electronicscrew terminalsnoyesout of ASiout of AUXscrew terminals1 Single SlaveBWR1628
BWR3190circuit board 73 mm x 37,5 mm73 mm x 37,5 mm44 x electronicscrew terminalsthin coatedyesout of ASiout of ASiscrew terminals1 AB SlaveBWR3190
BWR1789circuit board 73 mm x 37,5 mm73 mm x 37,5 mm44 x electronicscrew terminalsthin coatedyesout of ASiout of ASiscrew terminals1 Single SlaveBWR1789
BWR2803circuit board 73 mm x 37,5 mm73 mm x 37,5 mm44 x electronicscrew terminalsthick coatedyesout of AUXout of AUXscrew terminals1 AB SlaveBWR2803
BWR2842circuit board 73 mm x 37,5 mm73 mm x 37,5 mm4-connecting wires, 200 mmthick coatedyesout of ASi-connecting wires, 200 mm1 AB SlaveBWR2842
BWR2774circuit board 73 mm x 37,5 mm73 mm x 37,5 mm8-connecting wires, 200 mmthick coatednoout of ASi-connecting wires, 200 mm2 AB SlavesBWR2774
BWR1351circuit board 73 mm x 37,5 mm73 mm x 37,5 mm8-wiring pins, anglednonoout of ASi-wiring pin, angled2 AB SlavesBWR1351
BWR1352circuit board 73 mm x 37,5 mm73 mm x 37,5 mm8-screw terminalsnonoout of ASi-screw terminals2 AB SlavesBWR1352
BWR1627circuit board 73 mm x 37,5 mm73 mm x 37,5 mm-6 x electronicscrew terminalsnono-out of ASiscrew terminals2 AB SlavesBWR1627
BWR3068circuit board 43 mm x 30 mm43 mm x 30 mm22 x electronicconnecting wires, 200 mmthick coatedyesout of ASiout of ASiconnecting wires, 200 mm1 AB SlaveBWR3068
BWR2574circuit board 43 mm x 30 mm43 mm x 30 mm22 x electronicconnecting wires, 100 mmthick coatedyesout of ASiout of ASiconnecting wires, 100 mm1 AB SlaveBWR2574
BWR2522circuit board 43 mm x 30 mm43 mm x 30 mm22 x electronicconnecting wires, 100 mm + contact pinsthick coatedyesout of ASiout of ASiconnecting wires, 100 mm1 AB SlaveBWR2522
BW1899circuit board 104 mm x 41 mm104 mm x 41 mm88 x electronicwiring pins, angledthin coatedyesout of ASiout of ASiwiring pin, angled2 AB SlavesBW1899
BW1901circuit board 93 mm x 51 mm93 mm x 51 mm1616 x electronicwiring pins, angledthin coatedyesout of ASiout of ASiwiring pin, angled4 AB SlavesBW1901
BWR3195circuit board 73 mm x 39,5 mm73 mm x 39,5 mm44 x electronicplug-in spring-type terminalsnoyesout of ASiout of ASiplug-in spring-type terminals1 AB SlaveBWR3195

 

 

To top

E/A Analog Modules: Circuit Board Modules ASi, PCB Solutions

  • Special variants on request
Figure Type

2 holes for assembly angles.

Circuit board dimensions

further connection options are available on request.

screw terminalswiring pins, angled
(pins 180° to PCB)		wiring  pins, straight
(pins 90° to PCB)		solder lugssocketsplug-in spring-type /
screw terminals		   connecting wires
PCB connection 		Inputs analog

Coating protects components and circuit boards when touched.

   thin coated   thick coated
Coating

status of in- and outputs is indicated by LEDs. In addition to that, both ASi LEDs (PWR green and FAULT red) show as usual regarding the ASi Slaves- the status of the ASi Slaves. Uaux is indicated by a green LED.

LED status display

inputs are supplied by ASi or by AUX (auxiliary 24 V power). If supplied by ASi, inputs shall not be connected to earth or to external potential.

Input voltage (sensor supply)

Electronic outputs are supplied by ASi or by AUX (auxiliary 24 V power). If supplied by ASi, outputs shall not be connected to earth or to external potential.

 

For relay outputs the relay contacts are initiated from ASi. The load circuit is powered externally as specified in the data sheet.

Output voltage (actuator supply)

The connection to ASi as well to AUX (auxiliary 24 V power) is made via yellow resp. black ASi profile cable with piercing technology or via M12 socket (in IP20 via clamps).


Line protection: If the module is supplied via a M12 connection with A or B coding, it may only be used with a current load of max. 4 A per pin in acc. with IEC 61076-2-101 and IEC 61076-2-109. A fused tap is recommended. There is no such limitation for modules supplied via piercing contacts.

ASi connection

AB Slave (max. 62 AB Slaves/ASi network), 2 AB Slaves (max. 31 modules with 2 AB Slaves), Single Slaves (max. 31 Single Slaves/ASi network), ASi-5 Slave (max. 62 ASi-5 Slaves/ASi network), mixed use allowed.
For modules with two slaves the second slave is turned off as long as the first slave is addressed to address "0".
Upon request, slaves are available with specific ASi Slave profiles.

ASi address 		Article No.
BWR3192circuit board 73 mm x 37,5 mm73 mm x 37,5 mmscrew terminals2 x 4 … 20 mAnoyesout of ASi-screw terminals1 Single SlaveBWR3192
BWR2035circuit board 73 mm x 37,5 mm73 mm x 37,5 mmwiring pins, angled2 x 0 ... 10 Vnoyesout of ASi-wiring pin, angled1 Single SlaveBWR2035

 

 

To top

Safety E/A Module: Circuit Board Modules ASi, PCB Solutions

  • Special versions on request
Figure Type

2 holes for assembly angles.

Circuit board dimensions 		Inputs Safety, SIL 3, Cat. 4 Inputs digital Outputs digital Outputs Safety, SIL 3, cat. 4 Safety signal inputs

further connection options are available on request.

screw terminalswiring pins, angled
(pins 180° to PCB)		wiring  pins, straight
(pins 90° to PCB)		solder lugssocketsplug-in spring-type /
screw terminals		   connecting wires
PCB connection

Coating protects components and circuit boards when touched.

   thin coated   thick coated
Coating

status of in- and outputs is indicated by LEDs. In addition to that, both ASi LEDs (PWR green and FAULT red) show as usual regarding the ASi Slaves- the status of the ASi Slaves. Uaux is indicated by a green LED.

LED status display

inputs are supplied by ASi or by AUX (auxiliary 24 V power). If supplied by ASi, inputs shall not be connected to earth or to external potential.

Input voltage (sensor supply)

Electronic outputs are supplied by ASi or by AUX (auxiliary 24 V power). If supplied by ASi, outputs shall not be connected to earth or to external potential.

 

For relay outputs the relay contacts are initiated from ASi. The load circuit is powered externally as specified in the data sheet.

Output voltage (actuator supply)

The connection to ASi as well to AUX (auxiliary 24 V power) is made via yellow resp. black ASi profile cable with piercing technology or via M12 socket (in IP20 via clamps).


Line protection: If the module is supplied via a M12 connection with A or B coding, it may only be used with a current load of max. 4 A per pin in acc. with IEC 61076-2-101 and IEC 61076-2-109. A fused tap is recommended. There is no such limitation for modules supplied via piercing contacts.

ASi connection

AB Slave (max. 62 AB Slaves/ASi network), 2 AB Slaves (max. 31 modules with 2 AB Slaves), Single Slaves (max. 31 Single Slaves/ASi network), ASi-5 Slave (max. 62 ASi-5 Slaves/ASi network), mixed use allowed.
For modules with two slaves the second slave is turned off as long as the first slave is addressed to address "0".
Upon request, slaves are available with specific ASi Slave profiles.

ASi address 		Article No.
BWR3067circuit board 43 mm x 30 mm, Safety43 mm x 30 mm1 x 2 channels-2 x electronic-floating contactsconnecting wires, 200 mmthick coatedyesout of ASiout of ASiconnecting wires, 200 mm1 Single SlaveBWR3067
BWR2426circuit board 43 mm x 30 mm, Safety43 mm x 30 mm1 x 2 channels-2 x electronic-floating contactsconnecting wires, 100 mmthick coatedyesout of ASiout of ASiconnecting wires, 100 mm1 Single SlaveBWR2426
BWR2521circuit board 43 mm x 30 mm, Safety43 mm x 30 mm1 x 2 channels-2 x electronic-floating contactsconnecting wires, 100 mm + contact pinsthick coatedyesout of ASiout of ASiconnecting wires, 100 mm1 Single SlaveBWR2521
BWR1896circuit board 73 mm x 37,5 mm, Safety73 mm x 37,5 mm1 x 2 channels-2 x electronic-floating contactsplug-in screw terminalsnoyesout of ASiout of AUXplug-in connecting wires1 Single SlaveBWR1896
BWR1751circuit board 73 mm x 37,5 mm, Safety73 mm x 37,5 mm1 x 2 channels-2 x electronic-floating contactsscrew terminalsnoyesout of ASiout of AUXscrew terminals1 Single SlaveBWR1751
BW2914circuit board 85 mm x 80 mm, Safety85 mm x 80 mm-22 x electronic1 release circuit, 1 x electronic safe output-screw terminalsthick coatedyesout of AUXout of AUXscrew terminals1 Single Slave + 2 AB SlavesBW2914

 

To top

Replacement, ASi version 2.0

Single Slaves work even with the first ASi Masters.