Jochen Bihl explains how a certified module from Bihl+Wiedemann makes "Selection of mode of safe operation" easier. Using a standard HMI users can safely select up to 5 different operating modes for a maximum of 6 system parts – each with individualized safety functions. Configuring the operating modes is very simple thanks to the ASIMON360 configuration software. The Euchner EKS electronic key system allows access to be restricted to authorized groups of persons.
Video length: 2:34
Selection of Mode of Safe Operation
Today's complex machines need the ability in certain situations to permit an operating mode at reduced speed or without monitoring of certain protective devices. This is now possible using so-called “Selection of Mode of Safe Operation.”
Bihl+Wiedemann makes it possible to easily implement Selection of Mode of Safe Operation up to PLe, with maximum convenience for the end user over a standard HMI. The access authorization for safe operating mode selection is supported via the Euchner EKS electronic key system.
Principle of the Selection of Mode of Safe Operation
The operating mode can be safely selected and activated using a standard HMI such as a touch panel.
Access to this selection is restricted to the authorized group of persons by the Euchner EKS electronic key system.
Full Flexibility for your Machine
- Five different operating modes with different safety functions are freely configurable
- Independent, centralized configuration of up to six different instances, e.g. for six different system parts
This way, you can set different system parts independently to different operating modes.