IO-Link with Bihl+Wiedemann: Easy, Flexible & Cost-efficient
Why should you choose us for IO-Link integration?
IO-Link devices are nowadays common in machines and systems. This is because IO-Link allows sensors and actuators to be connected to the control level via a cost-effective point-to-point connection. Find out more about IO-Link and the associated advantages here.
This page mainly deals with the following question: What is the best way to integrate IO-Link? Bihl+Wiedemann offers you a sophisticated concept for this: IO-Link can be embedded perfectly in ASi-5and our user-friendly PC software – from the device to the PLC or cloud. Our solution provides more benefits than just freedom of topology, reduced wiring complexity without switches, and a smart power supply concept. Other advantages include reduced IP management complexity and low-cost IO-Link masters, which we provide with 1, 2, 4 and 8 ports. Numerous technical features also enable you to commission IO-Link devices with maximum convenience. For us, one thing is certain: There is no smarter and more economical way to integrate IO-Link.
Advantages at a Glance
Extremely Simple Commissioning
IO-Link masters can be easily integrated using our convenient configuration tool. For example, you can easily open the IODD and get graphical support for the parameterization of IO-Link devices. Live device parameterization gives you direct control over the settings while being online.
Automatic Parameterization when Replacing Devices
When using a setup multiple times, the parameters of the connected IO-Link devices can be easily copied from master to master thanks to our PC software. This applies both within and across projects. The copy feature saves a lot of time and reduces parameterization errors, especially when using many IO-Link devices.
The amount of effort required for wiring is reduced because all nodes – IO-Link devices, standard sensors and safety modules – are connected to an unshielded 2-core cable using piercing technology. Besides, the maximum IO-Link cable length of 20 meters plays a secondary role in our case because you can distribute the IO-Link masters anywhere on the AS-Interface cable with up to 200 meters in length.
In round cable solutions, the respective connector indirectly determines the "limit" for individual IO-Link masters and for the total current of all IO-Link masters connected in series. With ASi, no loop-through from module to module is needed . The AUX supply is done over reverse polarity protected profile cables, so each IO-Link master draws its energy individually – at 20 A per AUX cable.
While common IO-Link masters are only available from 4 ports or more, ASi also offers the possibility to efficiently integrate 1- or 2-port IO-Link masters. This means that even distributed individual IO-Link devices can be perfectly integrated. You also enjoy great freedom in the choice of topology
and can implement a star, ring, line and network structure, for example. You also gain maximum flexibility through the fieldbus independence of our IO-Link masters.
Our IO-Link masters with 4 ports are, for instance, about 50 % cheaper than comparable modules from other manufacturers. This means that the costs for our gateway are recovered, for example, from just 3 IO-Link masters with 4 ports each. You also reduce your installation workload and benefit from the elimination of switches and pre-assembled cables. Click here to view our main cost comparison.
The IO-Link master is integrated as an ASi node into the ASi network
IO-Link devices can be integrated into the ASi network along with standard sensors, standard actuators and safety components
All process data (up to 32 bytes per port) of the IO-Link devices is available via the cyclic ASi communication.
All IO-Link parameters can be conveniently adjusted through the B+W Software Suite or acyclically via the control system
Diagnostic information from IO-Link available via ASi
Our IO-Link masters can be optimally combined with IO-Link devices from any manufacturer
If an IO-Link device needs to be replaced, its parameters are stored in the IO-Link master and are transferred automatically to the new one.
All IO-Link masters offer up to 32 bytes of cyclic process data per port and up to 4 x 16 bits of usable data are available in 1.27 ms each. The Bihl+Wiedemann software suites always enable convenient parameterization.
ASi-5 Module with integrated IO-Link Master with 8 Ports, IP67
- Convenient parameter assignment via Bihl+Wiedemann software suites
- Transmission of up to 4 × 16 Bit Process Data in 1,27 ms
- Up to 32 bytes of cyclic process data
- 8 × IO-Link ports Class A in one housing (BWU4386)
- Additional I/O signal on pin 2
ASi-5/ASi-3 Gateways with Safety Monitor
- Compatible with existing networks
ASi-5/ASi-3 Gateways in Stainless Steel
StarterKit ASi-5 / IO-Link
- Set consisting of:
- Starter kit is shipped fully assembled and wired in a convenient case
- Cost-effective version for starting with ASi-5
- Sufficient space for installing your own IO-Link sensor
Jochen Bihl introduces the ASi-5 Module with integrated IO-Link Master with 4 ports from Bihl+Wiedemann. The ASi-5 module can transmit up to 32 bytes of I/O cyclic data – which fits IO-Link perfectly. By default the modules transmit over AS-i a total of 8 bytes – 2 bytes per port – in 1.27 ms.
Video length: 2:39
IO-Link is an integral part of ASi-5. Paul Werge, Product Manager at Bihl+Wiedemann presents the new ASi-5 Module with inetgrated O-Link Master at Hanover Fair 2019. The new ASi-5 Module with integrated IO-Link Master is able to integrate any IO-Link devices into ASi. Up to 32 bytes of process data can be configured.
Video length: 1:43
IO-Link Safety Solutions from Bihl+Wiedemann
IO-Link Safety is an extension of IO-Link. There is an additional safety communication layer on the master and device side. These become the "Fail-Safe (FS) master" and "Fail-Safe (FS) device". Bihl+Wiedemann is in the process of developing its own "FS master". IO-Link is already a perfect match for the safety components of Bihl+Wiedemann.
Reduced machine-related costs
A cost-efficient standard cable establishes a connection up to 20 meters long between the IO-Link master and IO-Link device.
High machine availability
Downtimes are reduced because when a defective IO-Link device is replaced, its parameters are automatically transferred to the new sensor by the IO-Link master or control system.
IO-Link devices can be positioned in the machine directly at the work site. These do not have to be accessible for parameterization.
Continuous diagnostic data of the entire process lengthen maintenance intervals, since systems and machines need to be maintained much less frequently due to the automatic readjustment via IO-Link
It is possible to extend existing bus systems. As a prerequisite, the system mapping of IO-Link for the respective bus system must be already implemented. It is particularly easy to use IO-Link in conjunction with the ASi intelligent wiring system. Thanks to piercing technology, corresponding IO-Link masters can be easily retrofitted where they are needed.