Logo Bihl+Wiedemann GmbH

Building Automation

BW3547Fire damper „stand alone“ control unit with PROFINET interface for 1 ASi network

BW3547
fileadmin/verteiler/4_Bild/3547.jpg

  • 30 / 60 fire dampers
  • 3 fire alarm system contacts
  • 3 fire damper groups
  • 1 building ventilation system releases, extensible
  • Logo_ASi

Product description

Fire damper "stand alone" control unit for up to 30 / 60 fire dampers, Provided as a kit in rugged plastic housing, pre-wired for easy and fast installation, ready to connect with contactor plug, pre-installed user software, no further configuration needed, centralized control of damper drives and detection of damper positions, plain text display and spontaneous diagnostics directly via device display and function LEDs, automated testing of damper function via different test modes

Technical data

Type Fire damper "Stand alone" control unit
Model PROFINET, 1 ASi network, max. 30 / 60 fire dampers
Housing polystyrol, 300/300/209
Protection rating

"IP20":
Protected against solid foreign bodies having a diameter of 12.5 mm or larger and against finger contact, not protected against water.


"IP40":

Protected against solid foreign bodies having a diameter of 1.0 mm or larger, protected against access with a wire, no protection against water.

"IP54":

Protection against dust in damaging amounts, complete protection against contact, protection against splashing water in any angle.


"IP65":
Dust-tight, full protection against contact, protection against spray water (jet) from any angle.

"IP67":

Dust-tight, full protection against contact, protection against temporary immersion.

IP65
Inputs digital -
Outputs digital -
Inputs analog -
Outputs analog -
Input voltage (sensor supply)

inputs are supplied by ASi or by AUX (auxiliary 24 V power). If supplied by ASi, inputs shall not be connected to earth or to external potential.

-
Output voltage (actuator supply)

Electronic outputs are supplied by ASi or by AUX (auxiliary 24 V power). If supplied by ASi, outputs shall not be connected to earth or to external potential.

For relay outputs the relay contacts are initiated from ASi. The load circuit is powered externally as specified in the data sheet.

-
ASi address

AB Slave (max. 62 AB Slaves/ASi network), 2 AB Slaves (max. 31 modules with 2 AB Slaves), Single Slaves (max. 31 Single Slaves/ASi network), ASi-5 Slave (max. 62 ASi-5 Slaves/ASi network), mixed use allowed.
For modules with two slaves the second slave is turned off as long as the first slave is addressed to address "0".
Upon request, slaves are available with specific ASi Slave profiles.

-
Controlling ventilation, fire, smoke dampers Requirements for Germany and EC
Controlling heating/air conditioning -
Number of fire dampers 30 / 60
Number of fire damper groups 3
Number of building ventilation system releases 1, extensible