Logo Bihl+Wiedemann GmbH

Drive solutions

ASi makes full use of all its strengths in material handling technology. The motor modules for roller drives from Bihl+Wiedemann allow 24V motors to be controlled directly through ASi without the need for an additional control device. The speed of any driven roller can be varied from a central location. Our modules also make it possible to make use of the braking energy of the rollers in the system. Inputs on the modules are used to read in signals from sensors installed along the conveyor line.

In addition to motor modules for roller drives, Bihl+Wiedemann also provides drive solutions for remotely controlling AC motors (with or without frequency inverters) – an essential prerequisite for implementing new system structures.

 

Drive solutions with Serial Interface

  • SEW
  • NORD
  • EBM-Papst
Figure ASi-5/ASi-3

"SEW MOVIMOT®": Motor module to control geared motors with frequency inverters.

 

"NORD": Motor module to control geared motors with frequency inverters.


"EBM-Papst K4": Motor module to control geared motors with frequency inverters.


"SEW MOVI-SWITCH® 1E": Motor module to control motor starters MOVI-SWITCH® 1E.


"SEW MOVI-SWITCH ® 2S": Motor module to control motor starters MOVI-SWITCH® 2S.


"Lenze Smart Motor": Motor module to control Lenze Smart motors and to control additional sensors.


"Itoh Denki (PM500XE/XP)": Motor module to control 24 V motorized rollers Itoh Denki PM500XE/XP.


"Itoh Denki (PM605XE/XP)": Motor module to control 24 V motorized rollers Itoh Denki PM605XE/XP.


"Itoh Denki (PM500XC/XK)": Motor module to control 24 V motorized rollers Itoh Denki PM500XC/XK.

 

"Itoh Denki (PM605XC/XK)": Motor module to control 24 V motorized rollers Itoh Denki PM605XC/XK.


"RULMECA (RDR BL-2)": Motor module to control 24 V motorized rollers RULMECA RDR BL-2.


"RULMECA (RDR BL-3)": Motor module to control 24 V motorized rollers RULMECA RDR BL-3 (transmission rates 24:1, 36:1, 49:1, 64:1, 96:1; not suitable for transmission rates 12:1, 16:1).


"Interroll (EC200)": Motor module to control 24 V motorized rollers Interroll EC200.


"Interroll (EC300)": Motor module to control 24 V motorized rollers Interroll EC300.


"Interroll (EC310)": Motor module to control 24 V motorized rollers Interroll EC310.


"Interroll (EC5000 AI, 24 V, 20 W/35 W)": Motor module to control 24 V motorized rollers Interroll Typ EC5000 AI, 24 V, 20 W/35 W.


"Interroll (EC5000 AI, 48 V, 20 W/35 W/50 W)": Motor module to control 48 V motorized rollers Interroll Typ EC5000 AI, 48 V, 20 W/35 W/50 W.


"Rollex (Typ 840)": Motor module to control 24 V motorized rollers Rollex 840.

Drive
Number of Drives

Modules with a flat housing design and with cables which exit the sides make these ideal for installation in cable ducts, cable channels, cable troughs, cable rails or cable trays. Please note the respective housing depth for your particular installation.

Flat design, installation in cable duct possible
Inputs digital Outputs digital

inputs are supplied by ASi or by AUX (auxiliary 24 V power). If supplied by ASi, inputs shall not be connected to earth or to external potential.

Input voltage (sensor supply)

Electronic outputs are supplied by ASi or by AUX (auxiliary 24 V power). If supplied by ASi, outputs shall not be connected to earth or to external potential.

 

For relay outputs the relay contacts are initiated from ASi. The load circuit is powered externally as specified in the data sheet.

Output voltage (actuator supply)

Under normal conditions (no bus termination or repeater), the permissible total length of the ASi segment is max. 100 m. The calculation should take into consideration that the length of the connection cable (round cable) for each connected passive distributor must be doubled.

In the case of the active distributors (ASi modules) however only the one ASi profile cable is counted.

Round cable

The connection to ASi as well to AUX (auxiliary 24 V power) is made via yellow resp. black ASi profile cable with piercing technology or via M12 socket (in IP20 via clamps).


Line protection: If the module is supplied via a M12 connection with A or B coding, it may only be used with a current load of max. 4 A per pin in acc. with IEC 61076-2-101 and IEC 61076-2-109. A fused tap is recommended. There is no such limitation for modules supplied via piercing contacts.

ASi connection

AB address (max. 62 AB addresses/ASi network), 2 AB addresses (max. 31 modules with 2 AB addresses), Single addresses (max. 31 Single addresses/ASi network), ASi-5 address (max. 62 ASi-5 addresses/ASi network), mixed use allowed.
For ASi modules with two ASi nodes the second Asi node is turned off as long as the first Asi node is addressed to address "0".
Upon request, ASi modules are available with specific ASi node profiles.

ASi address
Article No.
BWU4068ASi-5 compatibleSEW MOVIMOT1no42 x electronicout of ASiout of AUXnoASi profile cable1 ASi-5 address
BWU4371ASi-5 compatibleNORD frequency inverter (NORDAC FLEX, NORDAC BASE, NORDAC LINK)1no42 x electronicout of ASiout of AUXnoASi profile cable1 ASi-5 address
BWU4370ASi-5 compatibleEBM-Papst K41no42 x electronicout of ASiout of AUXnoASi profile cable1 ASi-5 address
BWU4369ASi-5 compatibleRockwell PF5251-42 x electronicout of ASiout of AUX-ASi profile cable1 ASi-5 address

 

 

SEW-EURODRIVE

  • SEW MOVIMOT®
  • SEW MOVI-SWITCH®
  • Separate mounting
  • Simple maintenance
Figure ASi-5/ASi-3

"SEW MOVIMOT®": Motor module to control geared motors with frequency inverters.

 

"NORD": Motor module to control geared motors with frequency inverters.


"EBM-Papst K4": Motor module to control geared motors with frequency inverters.


"SEW MOVI-SWITCH® 1E": Motor module to control motor starters MOVI-SWITCH® 1E.


"SEW MOVI-SWITCH ® 2S": Motor module to control motor starters MOVI-SWITCH® 2S.


"Lenze Smart Motor": Motor module to control Lenze Smart motors and to control additional sensors.


"Itoh Denki (PM500XE/XP)": Motor module to control 24 V motorized rollers Itoh Denki PM500XE/XP.


"Itoh Denki (PM605XE/XP)": Motor module to control 24 V motorized rollers Itoh Denki PM605XE/XP.


"Itoh Denki (PM500XC/XK)": Motor module to control 24 V motorized rollers Itoh Denki PM500XC/XK.

 

"Itoh Denki (PM605XC/XK)": Motor module to control 24 V motorized rollers Itoh Denki PM605XC/XK.


"RULMECA (RDR BL-2)": Motor module to control 24 V motorized rollers RULMECA RDR BL-2.


"RULMECA (RDR BL-3)": Motor module to control 24 V motorized rollers RULMECA RDR BL-3 (transmission rates 24:1, 36:1, 49:1, 64:1, 96:1; not suitable for transmission rates 12:1, 16:1).


"Interroll (EC200)": Motor module to control 24 V motorized rollers Interroll EC200.


"Interroll (EC300)": Motor module to control 24 V motorized rollers Interroll EC300.


"Interroll (EC310)": Motor module to control 24 V motorized rollers Interroll EC310.


"Interroll (EC5000 AI, 24 V, 20 W/35 W)": Motor module to control 24 V motorized rollers Interroll Typ EC5000 AI, 24 V, 20 W/35 W.


"Interroll (EC5000 AI, 48 V, 20 W/35 W/50 W)": Motor module to control 48 V motorized rollers Interroll Typ EC5000 AI, 48 V, 20 W/35 W/50 W.


"Rollex (Typ 840)": Motor module to control 24 V motorized rollers Rollex 840.

Drive
Number of Drives

Modules with a flat housing design and with cables which exit the sides make these ideal for installation in cable ducts, cable channels, cable troughs, cable rails or cable trays. Please note the respective housing depth for your particular installation.

Flat design, installation in cable duct possible
Inputs digital Outputs digital

inputs are supplied by ASi or by AUX (auxiliary 24 V power). If supplied by ASi, inputs shall not be connected to earth or to external potential.

Input voltage (sensor supply)

Electronic outputs are supplied by ASi or by AUX (auxiliary 24 V power). If supplied by ASi, outputs shall not be connected to earth or to external potential.

 

For relay outputs the relay contacts are initiated from ASi. The load circuit is powered externally as specified in the data sheet.

Output voltage (actuator supply)

Under normal conditions (no bus termination or repeater), the permissible total length of the ASi segment is max. 100 m. The calculation should take into consideration that the length of the connection cable (round cable) for each connected passive distributor must be doubled.

In the case of the active distributors (ASi modules) however only the one ASi profile cable is counted.

Round cable

The connection to ASi as well to AUX (auxiliary 24 V power) is made via yellow resp. black ASi profile cable with piercing technology or via M12 socket (in IP20 via clamps).


Line protection: If the module is supplied via a M12 connection with A or B coding, it may only be used with a current load of max. 4 A per pin in acc. with IEC 61076-2-101 and IEC 61076-2-109. A fused tap is recommended. There is no such limitation for modules supplied via piercing contacts.

ASi connection

AB address (max. 62 AB addresses/ASi network), 2 AB addresses (max. 31 modules with 2 AB addresses), Single addresses (max. 31 Single addresses/ASi network), ASi-5 address (max. 62 ASi-5 addresses/ASi network), mixed use allowed.
For ASi modules with two ASi nodes the second Asi node is turned off as long as the first Asi node is addressed to address "0".
Upon request, ASi modules are available with specific ASi node profiles.

ASi address
Article No.
BWU4718ASi-5 compatibleSEW MOVI-C1yes, depth: 35 mm1-out of ASi-1 mASi profile cable1 ASi-5 address
BWU3751ASi-3 compatibleSEW MOVIMOT1yes, depth: 35 mm2-out of AUXout of AUX2 mASi profile cable1 AB address
BWU3605ASi-3 compatibleSEW MOVIMOT1yes, depth: 35 mm2-out of AUXout of AUX2 mASi profile cable1 AB address
BWU3782ASi-3 compatibleSEW MOVIMOT1yes, depth: 35 mm3-out of ASiout of AUXM: 2 m, I: 0,3 mASi profile cable1 AB address
BWU3781ASi-3 compatibleSEW MOVIMOT1yes, depth: 35 mm3-out of ASiout of AUXM: 1 m, I: 0,3 mASi profile cable1 Single address
BWU3406ASi-3 compatibleSEW MOVIMOT1yes, depth: 19 mm2-out of ASi-2 mASi profile cable1 Single address
BWU4068ASi-5 compatibleSEW MOVIMOT1no42 x electronicout of ASiout of AUXnoASi profile cable1 ASi-5 address
BWU2912ASi-3 compatibleSEW MOVIMOT1no2-out of ASi-noASi profile cable1 Single address
BWU2956ASi-3 compatibleSEW MOVIMOT1no2-out of AUX-noASi via M121 Single address
BWU2437ASi-3 compatibleSEW MOVI-SWITCH 1E1no3-out of ASiout of ASinoASi profile cable1 Single address
BWU2957ASi-3 compatibleSEW MOVI-SWITCH 1E1no3-out of AUXout of AUXnoASi via M121 Single address
BWU2767ASi-3 compatibleSEW MOVI-SWITCH 1E2no42 x electronicout of AUXout of AUXnoASi profile cable1 AB address
BWU3032ASi-3 compatibleSEW MOVI-SWITCH 2S, Lenze Smart Motor2no44 x electronicout of AUXout of AUXnoASi profile cable1 AB address

 

 

Lenze Smart Motor

  • Connections for up to 2 Lenze Smart Motors
  • Connections for up to 3 sensors
  • Control of up to 5 speeds
  • Simple connection of motors via M12 connectors
  • Separate mounting
  • Simple maintenance
Figure ASi-5/ASi-3

"SEW MOVIMOT®": Motor module to control geared motors with frequency inverters.

 

"NORD": Motor module to control geared motors with frequency inverters.


"EBM-Papst K4": Motor module to control geared motors with frequency inverters.


"SEW MOVI-SWITCH® 1E": Motor module to control motor starters MOVI-SWITCH® 1E.


"SEW MOVI-SWITCH ® 2S": Motor module to control motor starters MOVI-SWITCH® 2S.


"Lenze Smart Motor": Motor module to control Lenze Smart motors and to control additional sensors.


"Itoh Denki (PM500XE/XP)": Motor module to control 24 V motorized rollers Itoh Denki PM500XE/XP.


"Itoh Denki (PM605XE/XP)": Motor module to control 24 V motorized rollers Itoh Denki PM605XE/XP.


"Itoh Denki (PM500XC/XK)": Motor module to control 24 V motorized rollers Itoh Denki PM500XC/XK.

 

"Itoh Denki (PM605XC/XK)": Motor module to control 24 V motorized rollers Itoh Denki PM605XC/XK.


"RULMECA (RDR BL-2)": Motor module to control 24 V motorized rollers RULMECA RDR BL-2.


"RULMECA (RDR BL-3)": Motor module to control 24 V motorized rollers RULMECA RDR BL-3 (transmission rates 24:1, 36:1, 49:1, 64:1, 96:1; not suitable for transmission rates 12:1, 16:1).


"Interroll (EC200)": Motor module to control 24 V motorized rollers Interroll EC200.


"Interroll (EC300)": Motor module to control 24 V motorized rollers Interroll EC300.


"Interroll (EC310)": Motor module to control 24 V motorized rollers Interroll EC310.


"Interroll (EC5000 AI, 24 V, 20 W/35 W)": Motor module to control 24 V motorized rollers Interroll Typ EC5000 AI, 24 V, 20 W/35 W.


"Interroll (EC5000 AI, 48 V, 20 W/35 W/50 W)": Motor module to control 48 V motorized rollers Interroll Typ EC5000 AI, 48 V, 20 W/35 W/50 W.


"Rollex (Typ 840)": Motor module to control 24 V motorized rollers Rollex 840.

Drive
Number of Drives Inputs digital Outputs digital

inputs are supplied by ASi or by AUX (auxiliary 24 V power). If supplied by ASi, inputs shall not be connected to earth or to external potential.

Input voltage (sensor supply)

Electronic outputs are supplied by ASi or by AUX (auxiliary 24 V power). If supplied by ASi, outputs shall not be connected to earth or to external potential.

 

For relay outputs the relay contacts are initiated from ASi. The load circuit is powered externally as specified in the data sheet.

Output voltage (actuator supply)

Under normal conditions (no bus termination or repeater), the permissible total length of the ASi segment is max. 100 m. The calculation should take into consideration that the length of the connection cable (round cable) for each connected passive distributor must be doubled.

In the case of the active distributors (ASi modules) however only the one ASi profile cable is counted.

Round cable

The connection to ASi as well to AUX (auxiliary 24 V power) is made via yellow resp. black ASi profile cable with piercing technology or via M12 socket (in IP20 via clamps).


Line protection: If the module is supplied via a M12 connection with A or B coding, it may only be used with a current load of max. 4 A per pin in acc. with IEC 61076-2-101 and IEC 61076-2-109. A fused tap is recommended. There is no such limitation for modules supplied via piercing contacts.

ASi connection

AB address (max. 62 AB addresses/ASi network), 2 AB addresses (max. 31 modules with 2 AB addresses), Single addresses (max. 31 Single addresses/ASi network), ASi-5 address (max. 62 ASi-5 addresses/ASi network), mixed use allowed.
For ASi modules with two ASi nodes the second Asi node is turned off as long as the first Asi node is addressed to address "0".
Upon request, ASi modules are available with specific ASi node profiles.

ASi address
Article No.
BWU3436ASi-3 compatibleLenze Smart Motor13-out of AUXout of AUX1 mASi profile cable1 AB address
BWU3787ASi-3 compatibleLenze Smart Motor13-out of AUXout of AUX2 mASi profile cable1 AB address
BWU3640ASi-3 compatibleLenze Smart Motor13-out of ASiout of ASi2 mASi profile cable1 AB address
BWU3784ASi-3 compatibleLenze Smart Motor13-out of ASiout of ASiX2, I2: 2 m, I3/I4: 0,30 mASi profile cable1 AB address
BWU3886ASi-3 compatibleLenze Smart Motor13-out of ASiout of ASinoASi profile cable1 AB address
BWU3115ASi-3 compatibleLenze Smart Motor13-out of AUXout of AUXnoASi profile cable1 AB address
BWU3181ASi-3 compatibleLenze Smart Motor13-out of AUXout of AUXnoASi via M121 AB address
BWU3032ASi-3 compatibleSEW MOVI-SWITCH 2S, Lenze Smart Motor244 x electronicout of AUXout of AUXnoASi profile cable1 AB address

 

 

Interroll, 24 V/48 V Motorized Rolles

  • Interroll EC5000 AI, 24V
  • Interroll EC5000 AI, 48V
  • Interroll EC200
  • Interroll EC300
  • Interroll EC310
Figure ASi-5/ASi-3

"SEW MOVIMOT®": Motor module to control geared motors with frequency inverters.

 

"NORD": Motor module to control geared motors with frequency inverters.


"EBM-Papst K4": Motor module to control geared motors with frequency inverters.


"SEW MOVI-SWITCH® 1E": Motor module to control motor starters MOVI-SWITCH® 1E.


"SEW MOVI-SWITCH ® 2S": Motor module to control motor starters MOVI-SWITCH® 2S.


"Lenze Smart Motor": Motor module to control Lenze Smart motors and to control additional sensors.


"Itoh Denki (PM500XE/XP)": Motor module to control 24 V motorized rollers Itoh Denki PM500XE/XP.


"Itoh Denki (PM605XE/XP)": Motor module to control 24 V motorized rollers Itoh Denki PM605XE/XP.


"Itoh Denki (PM500XC/XK)": Motor module to control 24 V motorized rollers Itoh Denki PM500XC/XK.

 

"Itoh Denki (PM605XC/XK)": Motor module to control 24 V motorized rollers Itoh Denki PM605XC/XK.


"RULMECA (RDR BL-2)": Motor module to control 24 V motorized rollers RULMECA RDR BL-2.


"RULMECA (RDR BL-3)": Motor module to control 24 V motorized rollers RULMECA RDR BL-3 (transmission rates 24:1, 36:1, 49:1, 64:1, 96:1; not suitable for transmission rates 12:1, 16:1).


"Interroll (EC200)": Motor module to control 24 V motorized rollers Interroll EC200.


"Interroll (EC300)": Motor module to control 24 V motorized rollers Interroll EC300.


"Interroll (EC310)": Motor module to control 24 V motorized rollers Interroll EC310.


"Interroll (EC5000 AI, 24 V, 20 W/35 W)": Motor module to control 24 V motorized rollers Interroll Typ EC5000 AI, 24 V, 20 W/35 W.


"Interroll (EC5000 AI, 48 V, 20 W/35 W/50 W)": Motor module to control 48 V motorized rollers Interroll Typ EC5000 AI, 48 V, 20 W/35 W/50 W.


"Rollex (Typ 840)": Motor module to control 24 V motorized rollers Rollex 840.

Drive
Number of Drives

In the motor module UL approved fuses are placed before each of the motor supply connections. A short circuit in the motor causes this fuse to blow, protecting the connection cable between the module and motor.

After blowing the not exchangeable fuse the module is no longer functional and the module needs to be replaced. The characteristics of the fuse must be checked against the motor data before using the module.

The protection circuit in the module allows a very simple protection of the motor cables. The fuse for the cable protection is a slow-blow one; without short circuit the robust behavior of the module remains.


"no":

The motor module is designed to supply the 24 V directly to the motor. At high currents or surges as they occur for example at braking, the module will not be damaged.

The cable protection should be realized outside the motor module with additional measures.

Line protection fuse

Modules with a flat housing design and with cables which exit the sides make these ideal for installation in cable ducts, cable channels, cable troughs, cable rails or cable trays. Please note the respective housing depth for your particular installation.

Flat design, installation in cable duct possible
Inputs digital Outputs digital

inputs are supplied by ASi or by AUX (auxiliary 24 V power). If supplied by ASi, inputs shall not be connected to earth or to external potential.

Input voltage (sensor supply)

Electronic outputs are supplied by ASi or by AUX (auxiliary 24 V power). If supplied by ASi, outputs shall not be connected to earth or to external potential.

 

For relay outputs the relay contacts are initiated from ASi. The load circuit is powered externally as specified in the data sheet.

Output voltage (actuator supply)

Under normal conditions (no bus termination or repeater), the permissible total length of the ASi segment is max. 100 m. The calculation should take into consideration that the length of the connection cable (round cable) for each connected passive distributor must be doubled.

In the case of the active distributors (ASi modules) however only the one ASi profile cable is counted.

Round cable

The connection to ASi as well to AUX (auxiliary 24 V power) is made via yellow resp. black ASi profile cable with piercing technology or via M12 socket (in IP20 via clamps).


Line protection: If the module is supplied via a M12 connection with A or B coding, it may only be used with a current load of max. 4 A per pin in acc. with IEC 61076-2-101 and IEC 61076-2-109. A fused tap is recommended. There is no such limitation for modules supplied via piercing contacts.

ASi connection

AB address (max. 62 AB addresses/ASi network), 2 AB addresses (max. 31 modules with 2 AB addresses), Single addresses (max. 31 Single addresses/ASi network), ASi-5 address (max. 62 ASi-5 addresses/ASi network), mixed use allowed.
For ASi modules with two ASi nodes the second Asi node is turned off as long as the first Asi node is addressed to address "0".
Upon request, ASi modules are available with specific ASi node profiles.

ASi address
Article No.
BWU4224ASi-3 compatibleInterroll (EC310, EC5000 AI, 24 V), Itoh Denki (PM500XC/XK, PM605XC/XK), RULMECA (RDR BL-2)2yes, separately for each motor, 4,5 A (slow-blow fuse)yes, depth: 19 mm2-out of ASiout of AUX1 mASi profile cable1 AB address
BWU3290ASi-3 compatibleInterroll (EC310, EC5000 AI, 24 V), Itoh Denki (PM500XC/XK, PM605XC/XK), RULMECA (RDR BL-2)2yes, separately for each motor, 4,5 A (slow-blow fuse)yes, depth: 19 mm2-out of ASiout of AUXM: 0,40 m, I: 0,06 mASi profile cable1 AB address
BW3409ASi-3 compatibleInterroll (EC310, EC5000 AI, 24 V), Itoh Denki (PM500XC/XK, PM605XC/XK), RULMECA (RDR BL-2)2yes, separately for each motor, 4,5 A (slow-blow fuse)yes, depth: 19 mm2-out of ASiout of AUXM: 0,60 m, I: 1 mASi profile cable1 AB address
BW3813ASi-3 compatibleInterroll (EC310), Itoh Denki (PM500XC/XK, PM605XC/XK), RULMECA (RDR BL-2)2yes, separately for each motor, 3,5 A (slow-blow fuse)yes, depth: 19 mm2-out of ASiout of AUXM: 0,60 m, I: 1 mASi profile cable1 AB address
BWU4212ASi-5 compatibleInterroll (EC5000 AI, 48 V, 20 W/35 W/50 W)2yes, separately for each motor, 4,0 A (slow-blow fuse)no4-out of ASiout of AUX (48 V)noASi profile cable1 ASi-5 address
BWU4246ASi-5 compatibleInterroll (EC5000 AI, 24 V, 20 W/35 W), Itoh Denki (PM500XC/XK, PM605XC/XK), RULMECA (RDR BL-3)2yes, separately for each motor, 5,0 A (slow-blow fuse)no4-out of ASiout of AUXnoASi profile cable1 ASi-5 address
BWU4205ASi-3 compatibleInterroll (EC5000 AI, 24 V, 20 W/35 W), Itoh Denki (PM500XC/XK, PM605XC/XK), RULMECA (RDR BL-3)2yes, separately for each motor, 4,5 A (slow-blow fuse)no2-out of ASiout of AUXnoASi profile cable1 AB address
BWU2575ASi-3 compatibleInterroll (EC310), Itoh Denki (PM500XC/XK, PM605XC/XK), RULMECA (RDR BL-2)2nono2-out of ASiout of AUXnoASi profile cable1 AB address
BWU2958ASi-3 compatibleInterroll (EC310), Itoh Denki (PM500XC/XK, PM605XC/XK), RULMECA (RDR BL-2)2nono2-out of AUXout of AUXnoASi via M121 AB address
BWU2398ASi-3 compatibleInterroll (EC200, EC300), Rollex (Typ 840)2nono2-out of ASiout of AUXnoASi profile cable1 AB address
BWU2766ASi-3 compatibleInterroll (EC310), RULMECA (RDR BL-2), Itoh Denki (PM500ME/XE/XP, PM605ME/XE/XP)2yes, separately for each motor, 4,5 A (slow-blow fuse)no4-out of ASiout of AUXnoASi profile cable1 Single address + 1 AB address
BWU2478ASi-3 compatibleInterroll (EC310), RULMECA (RDR BL-2), Itoh Denki (PM500ME/XE/XP, PM605ME/XE/XP)2nono4-out of ASiout of AUXnoASi profile cable1 Single address + 1 AB address
BWU2959ASi-3 compatibleInterroll (EC310), RULMECA (RDR BL-2), Itoh Denki (PM500ME/XE/XP, PM605ME/XE/XP)2nono4-out of ASiout of AUXnoASi via M121 Single address + 1 AB address

 

 

Itoh Denki, 24 V Motorized Rolles

  • Itoh Denki PM500ME/XE/XK/XP
  • Itoh Denki PM605ME/XE/XP
Figure ASi-5/ASi-3

"SEW MOVIMOT®": Motor module to control geared motors with frequency inverters.

 

"NORD": Motor module to control geared motors with frequency inverters.


"EBM-Papst K4": Motor module to control geared motors with frequency inverters.


"SEW MOVI-SWITCH® 1E": Motor module to control motor starters MOVI-SWITCH® 1E.


"SEW MOVI-SWITCH ® 2S": Motor module to control motor starters MOVI-SWITCH® 2S.


"Lenze Smart Motor": Motor module to control Lenze Smart motors and to control additional sensors.


"Itoh Denki (PM500XE/XP)": Motor module to control 24 V motorized rollers Itoh Denki PM500XE/XP.


"Itoh Denki (PM605XE/XP)": Motor module to control 24 V motorized rollers Itoh Denki PM605XE/XP.


"Itoh Denki (PM500XC/XK)": Motor module to control 24 V motorized rollers Itoh Denki PM500XC/XK.

 

"Itoh Denki (PM605XC/XK)": Motor module to control 24 V motorized rollers Itoh Denki PM605XC/XK.


"RULMECA (RDR BL-2)": Motor module to control 24 V motorized rollers RULMECA RDR BL-2.


"RULMECA (RDR BL-3)": Motor module to control 24 V motorized rollers RULMECA RDR BL-3 (transmission rates 24:1, 36:1, 49:1, 64:1, 96:1; not suitable for transmission rates 12:1, 16:1).


"Interroll (EC200)": Motor module to control 24 V motorized rollers Interroll EC200.


"Interroll (EC300)": Motor module to control 24 V motorized rollers Interroll EC300.


"Interroll (EC310)": Motor module to control 24 V motorized rollers Interroll EC310.


"Interroll (EC5000 AI, 24 V, 20 W/35 W)": Motor module to control 24 V motorized rollers Interroll Typ EC5000 AI, 24 V, 20 W/35 W.


"Interroll (EC5000 AI, 48 V, 20 W/35 W/50 W)": Motor module to control 48 V motorized rollers Interroll Typ EC5000 AI, 48 V, 20 W/35 W/50 W.


"Rollex (Typ 840)": Motor module to control 24 V motorized rollers Rollex 840.

Drive
Number of Drives

In the motor module UL approved fuses are placed before each of the motor supply connections. A short circuit in the motor causes this fuse to blow, protecting the connection cable between the module and motor.

After blowing the not exchangeable fuse the module is no longer functional and the module needs to be replaced. The characteristics of the fuse must be checked against the motor data before using the module.

The protection circuit in the module allows a very simple protection of the motor cables. The fuse for the cable protection is a slow-blow one; without short circuit the robust behavior of the module remains.


"no":

The motor module is designed to supply the 24 V directly to the motor. At high currents or surges as they occur for example at braking, the module will not be damaged.

The cable protection should be realized outside the motor module with additional measures.

Line protection fuse

Modules with a flat housing design and with cables which exit the sides make these ideal for installation in cable ducts, cable channels, cable troughs, cable rails or cable trays. Please note the respective housing depth for your particular installation.

Flat design, installation in cable duct possible
Inputs digital Outputs digital

inputs are supplied by ASi or by AUX (auxiliary 24 V power). If supplied by ASi, inputs shall not be connected to earth or to external potential.

Input voltage (sensor supply)

Electronic outputs are supplied by ASi or by AUX (auxiliary 24 V power). If supplied by ASi, outputs shall not be connected to earth or to external potential.

 

For relay outputs the relay contacts are initiated from ASi. The load circuit is powered externally as specified in the data sheet.

Output voltage (actuator supply)

Under normal conditions (no bus termination or repeater), the permissible total length of the ASi segment is max. 100 m. The calculation should take into consideration that the length of the connection cable (round cable) for each connected passive distributor must be doubled.

In the case of the active distributors (ASi modules) however only the one ASi profile cable is counted.

Round cable

The connection to ASi as well to AUX (auxiliary 24 V power) is made via yellow resp. black ASi profile cable with piercing technology or via M12 socket (in IP20 via clamps).


Line protection: If the module is supplied via a M12 connection with A or B coding, it may only be used with a current load of max. 4 A per pin in acc. with IEC 61076-2-101 and IEC 61076-2-109. A fused tap is recommended. There is no such limitation for modules supplied via piercing contacts.

ASi connection

AB address (max. 62 AB addresses/ASi network), 2 AB addresses (max. 31 modules with 2 AB addresses), Single addresses (max. 31 Single addresses/ASi network), ASi-5 address (max. 62 ASi-5 addresses/ASi network), mixed use allowed.
For ASi modules with two ASi nodes the second Asi node is turned off as long as the first Asi node is addressed to address "0".
Upon request, ASi modules are available with specific ASi node profiles.

ASi address
Article No.
BWU3278ASi-3 compatibleItoh Denki (PM500XE/XP, PM605XE/XP)2yes, separately for each motor, 3,5 A (slow-blow fuse)yes, depth: 19 mm4-out of ASiout of AUXM: 0,40 m, I: 0,06 mASi profile cable1 AB address
BWU3567ASi-3 compatibleItoh Denki (PM500XE/XP, PM605XE/XP)2yes, separately for each motor, 3,5 A (slow-blow fuse)yes, depth: 19 mm4-out of ASiout of AUXM: 0,40 m, I: 0,40 mASi profile cable1 AB address
BWU3679ASi-3 compatibleItoh Denki (PM500XE/XP, PM605XE/XP)2yes, separately for each motor, 3,5 A (slow-blow fuse)yes, depth: 19 mm4-out of ASiout of AUXM: 0,40 m, I: 0,06 mASi profile cable1 AB address
BW3452-Itoh Denki (PM500XE/XP, PM605XE/XP)2yes, separately for each motor, 3,5 A (slow-blow fuse)yes, depth: 18 mm2 x light barrier-out of AUXout of AUXM: 0,43 m, I: 0,09 m, AUX: 0,13 m--
BWU4246ASi-5 compatibleInterroll (EC5000 AI, 24 V, 20 W/35 W), Itoh Denki (PM500XC/XK, PM605XC/XK), RULMECA (RDR BL-3)2yes, separately for each motor, 5,0 A (slow-blow fuse)no4-out of ASiout of AUXnoASi profile cable1 ASi-5 address
BWU2715ASi-3 compatibleItoh Denki (PM500XE/XP, PM605XE/XP)2yes, separately for each motor, 3,5 A (slow-blow fuse)no2-out of ASiout of AUXnoASi profile cable1 AB address
BWU3804ASi-3 compatibleItoh Denki (PM500XE/XP, PM605XE/XP)2yes, separately for each motor, 3,5 A (slow-blow fuse)no2-out of ASiout of AUXnoASi profile cable1 AB address
BWU4205ASi-3 compatibleInterroll (EC5000 AI, 24 V, 20 W/35 W), Itoh Denki (PM500XC/XK, PM605XC/XK), RULMECA (RDR BL-3)2yes, separately for each motor, 4,5 A (slow-blow fuse)no2-out of ASiout of AUXnoASi profile cable1 AB address
BWU2766ASi-3 compatibleInterroll (EC310), RULMECA (RDR BL-2), Itoh Denki (PM500ME/XE/XP, PM605ME/XE/XP)2yes, separately for each motor, 4,5 A (slow-blow fuse)no4-out of ASiout of AUXnoASi profile cable1 Single address + 1 AB address
BWU2478ASi-3 compatibleInterroll (EC310), RULMECA (RDR BL-2), Itoh Denki (PM500ME/XE/XP, PM605ME/XE/XP)2nono4-out of ASiout of AUXnoASi profile cable1 Single address + 1 AB address
BWU2959ASi-3 compatibleInterroll (EC310), RULMECA (RDR BL-2), Itoh Denki (PM500ME/XE/XP, PM605ME/XE/XP)2nono4-out of ASiout of AUXnoASi via M121 Single address + 1 AB address

 

 

RULMECA, 24 V Motorized Rolles

  • RULMECA RDR BL-2
  • RULMECA RDR BL-3
Figure ASi-5/ASi-3

"SEW MOVIMOT®": Motor module to control geared motors with frequency inverters.

 

"NORD": Motor module to control geared motors with frequency inverters.


"EBM-Papst K4": Motor module to control geared motors with frequency inverters.


"SEW MOVI-SWITCH® 1E": Motor module to control motor starters MOVI-SWITCH® 1E.


"SEW MOVI-SWITCH ® 2S": Motor module to control motor starters MOVI-SWITCH® 2S.


"Lenze Smart Motor": Motor module to control Lenze Smart motors and to control additional sensors.


"Itoh Denki (PM500XE/XP)": Motor module to control 24 V motorized rollers Itoh Denki PM500XE/XP.


"Itoh Denki (PM605XE/XP)": Motor module to control 24 V motorized rollers Itoh Denki PM605XE/XP.


"Itoh Denki (PM500XC/XK)": Motor module to control 24 V motorized rollers Itoh Denki PM500XC/XK.

 

"Itoh Denki (PM605XC/XK)": Motor module to control 24 V motorized rollers Itoh Denki PM605XC/XK.


"RULMECA (RDR BL-2)": Motor module to control 24 V motorized rollers RULMECA RDR BL-2.


"RULMECA (RDR BL-3)": Motor module to control 24 V motorized rollers RULMECA RDR BL-3 (transmission rates 24:1, 36:1, 49:1, 64:1, 96:1; not suitable for transmission rates 12:1, 16:1).


"Interroll (EC200)": Motor module to control 24 V motorized rollers Interroll EC200.


"Interroll (EC300)": Motor module to control 24 V motorized rollers Interroll EC300.


"Interroll (EC310)": Motor module to control 24 V motorized rollers Interroll EC310.


"Interroll (EC5000 AI, 24 V, 20 W/35 W)": Motor module to control 24 V motorized rollers Interroll Typ EC5000 AI, 24 V, 20 W/35 W.


"Interroll (EC5000 AI, 48 V, 20 W/35 W/50 W)": Motor module to control 48 V motorized rollers Interroll Typ EC5000 AI, 48 V, 20 W/35 W/50 W.


"Rollex (Typ 840)": Motor module to control 24 V motorized rollers Rollex 840.

Drive
Number of Drives

In the motor module UL approved fuses are placed before each of the motor supply connections. A short circuit in the motor causes this fuse to blow, protecting the connection cable between the module and motor.

After blowing the not exchangeable fuse the module is no longer functional and the module needs to be replaced. The characteristics of the fuse must be checked against the motor data before using the module.

The protection circuit in the module allows a very simple protection of the motor cables. The fuse for the cable protection is a slow-blow one; without short circuit the robust behavior of the module remains.


"no":

The motor module is designed to supply the 24 V directly to the motor. At high currents or surges as they occur for example at braking, the module will not be damaged.

The cable protection should be realized outside the motor module with additional measures.

Line protection fuse

Modules with a flat housing design and with cables which exit the sides make these ideal for installation in cable ducts, cable channels, cable troughs, cable rails or cable trays. Please note the respective housing depth for your particular installation.

Flat design, installation in cable duct possible
Inputs digital Outputs digital

inputs are supplied by ASi or by AUX (auxiliary 24 V power). If supplied by ASi, inputs shall not be connected to earth or to external potential.

Input voltage (sensor supply)

Electronic outputs are supplied by ASi or by AUX (auxiliary 24 V power). If supplied by ASi, outputs shall not be connected to earth or to external potential.

 

For relay outputs the relay contacts are initiated from ASi. The load circuit is powered externally as specified in the data sheet.

Output voltage (actuator supply)

Under normal conditions (no bus termination or repeater), the permissible total length of the ASi segment is max. 100 m. The calculation should take into consideration that the length of the connection cable (round cable) for each connected passive distributor must be doubled.

In the case of the active distributors (ASi modules) however only the one ASi profile cable is counted.

Round cable

The connection to ASi as well to AUX (auxiliary 24 V power) is made via yellow resp. black ASi profile cable with piercing technology or via M12 socket (in IP20 via clamps).


Line protection: If the module is supplied via a M12 connection with A or B coding, it may only be used with a current load of max. 4 A per pin in acc. with IEC 61076-2-101 and IEC 61076-2-109. A fused tap is recommended. There is no such limitation for modules supplied via piercing contacts.

ASi connection

AB address (max. 62 AB addresses/ASi network), 2 AB addresses (max. 31 modules with 2 AB addresses), Single addresses (max. 31 Single addresses/ASi network), ASi-5 address (max. 62 ASi-5 addresses/ASi network), mixed use allowed.
For ASi modules with two ASi nodes the second Asi node is turned off as long as the first Asi node is addressed to address "0".
Upon request, ASi modules are available with specific ASi node profiles.

ASi address
Article No.
BWU4224ASi-3 compatibleInterroll (EC310, EC5000 AI, 24 V), Itoh Denki (PM500XC/XK, PM605XC/XK), RULMECA (RDR BL-2)2yes, separately for each motor, 4,5 A (slow-blow fuse)yes, depth: 19 mm2-out of ASiout of AUX1 mASi profile cable1 AB address
BWU3290ASi-3 compatibleInterroll (EC310, EC5000 AI, 24 V), Itoh Denki (PM500XC/XK, PM605XC/XK), RULMECA (RDR BL-2)2yes, separately for each motor, 4,5 A (slow-blow fuse)yes, depth: 19 mm2-out of ASiout of AUXM: 0,40 m, I: 0,06 mASi profile cable1 AB address
BW3409ASi-3 compatibleInterroll (EC310, EC5000 AI, 24 V), Itoh Denki (PM500XC/XK, PM605XC/XK), RULMECA (RDR BL-2)2yes, separately for each motor, 4,5 A (slow-blow fuse)yes, depth: 19 mm2-out of ASiout of AUXM: 0,60 m, I: 1 mASi profile cable1 AB address
BW3813ASi-3 compatibleInterroll (EC310), Itoh Denki (PM500XC/XK, PM605XC/XK), RULMECA (RDR BL-2)2yes, separately for each motor, 3,5 A (slow-blow fuse)yes, depth: 19 mm2-out of ASiout of AUXM: 0,60 m, I: 1 mASi profile cable1 AB address
BWU4246ASi-5 compatibleInterroll (EC5000 AI, 24 V, 20 W/35 W), Itoh Denki (PM500XC/XK, PM605XC/XK), RULMECA (RDR BL-3)2yes, separately for each motor, 5,0 A (slow-blow fuse)no4-out of ASiout of AUXnoASi profile cable1 ASi-5 address
BWU4205ASi-3 compatibleInterroll (EC5000 AI, 24 V, 20 W/35 W), Itoh Denki (PM500XC/XK, PM605XC/XK), RULMECA (RDR BL-3)2yes, separately for each motor, 4,5 A (slow-blow fuse)no2-out of ASiout of AUXnoASi profile cable1 AB address
BWU2575ASi-3 compatibleInterroll (EC310), Itoh Denki (PM500XC/XK, PM605XC/XK), RULMECA (RDR BL-2)2nono2-out of ASiout of AUXnoASi profile cable1 AB address
BWU2958ASi-3 compatibleInterroll (EC310), Itoh Denki (PM500XC/XK, PM605XC/XK), RULMECA (RDR BL-2)2nono2-out of AUXout of AUXnoASi via M121 AB address
BWU2766ASi-3 compatibleInterroll (EC310), RULMECA (RDR BL-2), Itoh Denki (PM500ME/XE/XP, PM605ME/XE/XP)2yes, separately for each motor, 4,5 A (slow-blow fuse)no4-out of ASiout of AUXnoASi profile cable1 Single address + 1 AB address
BWU2478ASi-3 compatibleInterroll (EC310), RULMECA (RDR BL-2), Itoh Denki (PM500ME/XE/XP, PM605ME/XE/XP)2nono4-out of ASiout of AUXnoASi profile cable1 Single address + 1 AB address
BWU2959ASi-3 compatibleInterroll (EC310), RULMECA (RDR BL-2), Itoh Denki (PM500ME/XE/XP, PM605ME/XE/XP)2nono4-out of ASiout of AUXnoASi via M121 Single address + 1 AB address

 

 

Rollex, 24 V Motorized Rollers

  • Rollex (Typ 840)
Figure ASi-5/ASi-3

"SEW MOVIMOT®": Motor module to control geared motors with frequency inverters.

 

"NORD": Motor module to control geared motors with frequency inverters.


"EBM-Papst K4": Motor module to control geared motors with frequency inverters.


"SEW MOVI-SWITCH® 1E": Motor module to control motor starters MOVI-SWITCH® 1E.


"SEW MOVI-SWITCH ® 2S": Motor module to control motor starters MOVI-SWITCH® 2S.


"Lenze Smart Motor": Motor module to control Lenze Smart motors and to control additional sensors.


"Itoh Denki (PM500XE/XP)": Motor module to control 24 V motorized rollers Itoh Denki PM500XE/XP.


"Itoh Denki (PM605XE/XP)": Motor module to control 24 V motorized rollers Itoh Denki PM605XE/XP.


"Itoh Denki (PM500XC/XK)": Motor module to control 24 V motorized rollers Itoh Denki PM500XC/XK.

 

"Itoh Denki (PM605XC/XK)": Motor module to control 24 V motorized rollers Itoh Denki PM605XC/XK.


"RULMECA (RDR BL-2)": Motor module to control 24 V motorized rollers RULMECA RDR BL-2.


"RULMECA (RDR BL-3)": Motor module to control 24 V motorized rollers RULMECA RDR BL-3 (transmission rates 24:1, 36:1, 49:1, 64:1, 96:1; not suitable for transmission rates 12:1, 16:1).


"Interroll (EC200)": Motor module to control 24 V motorized rollers Interroll EC200.


"Interroll (EC300)": Motor module to control 24 V motorized rollers Interroll EC300.


"Interroll (EC310)": Motor module to control 24 V motorized rollers Interroll EC310.


"Interroll (EC5000 AI, 24 V, 20 W/35 W)": Motor module to control 24 V motorized rollers Interroll Typ EC5000 AI, 24 V, 20 W/35 W.


"Interroll (EC5000 AI, 48 V, 20 W/35 W/50 W)": Motor module to control 48 V motorized rollers Interroll Typ EC5000 AI, 48 V, 20 W/35 W/50 W.


"Rollex (Typ 840)": Motor module to control 24 V motorized rollers Rollex 840.

Drive
Number of Drives

In the motor module UL approved fuses are placed before each of the motor supply connections. A short circuit in the motor causes this fuse to blow, protecting the connection cable between the module and motor.

After blowing the not exchangeable fuse the module is no longer functional and the module needs to be replaced. The characteristics of the fuse must be checked against the motor data before using the module.

The protection circuit in the module allows a very simple protection of the motor cables. The fuse for the cable protection is a slow-blow one; without short circuit the robust behavior of the module remains.


"no":

The motor module is designed to supply the 24 V directly to the motor. At high currents or surges as they occur for example at braking, the module will not be damaged.

The cable protection should be realized outside the motor module with additional measures.

Line protection fuse

Modules with a flat housing design and with cables which exit the sides make these ideal for installation in cable ducts, cable channels, cable troughs, cable rails or cable trays. Please note the respective housing depth for your particular installation.

Flat design, installation in cable duct possible
Inputs digital Outputs digital

inputs are supplied by ASi or by AUX (auxiliary 24 V power). If supplied by ASi, inputs shall not be connected to earth or to external potential.

Input voltage (sensor supply)

Electronic outputs are supplied by ASi or by AUX (auxiliary 24 V power). If supplied by ASi, outputs shall not be connected to earth or to external potential.

 

For relay outputs the relay contacts are initiated from ASi. The load circuit is powered externally as specified in the data sheet.

Output voltage (actuator supply)

Under normal conditions (no bus termination or repeater), the permissible total length of the ASi segment is max. 100 m. The calculation should take into consideration that the length of the connection cable (round cable) for each connected passive distributor must be doubled.

In the case of the active distributors (ASi modules) however only the one ASi profile cable is counted.

Round cable

The connection to ASi as well to AUX (auxiliary 24 V power) is made via yellow resp. black ASi profile cable with piercing technology or via M12 socket (in IP20 via clamps).


Line protection: If the module is supplied via a M12 connection with A or B coding, it may only be used with a current load of max. 4 A per pin in acc. with IEC 61076-2-101 and IEC 61076-2-109. A fused tap is recommended. There is no such limitation for modules supplied via piercing contacts.

ASi connection

AB address (max. 62 AB addresses/ASi network), 2 AB addresses (max. 31 modules with 2 AB addresses), Single addresses (max. 31 Single addresses/ASi network), ASi-5 address (max. 62 ASi-5 addresses/ASi network), mixed use allowed.
For ASi modules with two ASi nodes the second Asi node is turned off as long as the first Asi node is addressed to address "0".
Upon request, ASi modules are available with specific ASi node profiles.

ASi address
Article No.
BWU2398ASi-3 compatibleInterroll (EC200, EC300), Rollex (Typ 840)2nono2-out of ASiout of AUXnoASi profile cable1 AB address

 

 

24 V Motorized Rollers

  • 24 VDC motors
Figure ASi-5/ASi-3

"SEW MOVIMOT®": Motor module to control geared motors with frequency inverters.

 

"NORD": Motor module to control geared motors with frequency inverters.


"EBM-Papst K4": Motor module to control geared motors with frequency inverters.


"SEW MOVI-SWITCH® 1E": Motor module to control motor starters MOVI-SWITCH® 1E.


"SEW MOVI-SWITCH ® 2S": Motor module to control motor starters MOVI-SWITCH® 2S.


"Lenze Smart Motor": Motor module to control Lenze Smart motors and to control additional sensors.


"Itoh Denki (PM500XE/XP)": Motor module to control 24 V motorized rollers Itoh Denki PM500XE/XP.


"Itoh Denki (PM605XE/XP)": Motor module to control 24 V motorized rollers Itoh Denki PM605XE/XP.


"Itoh Denki (PM500XC/XK)": Motor module to control 24 V motorized rollers Itoh Denki PM500XC/XK.

 

"Itoh Denki (PM605XC/XK)": Motor module to control 24 V motorized rollers Itoh Denki PM605XC/XK.


"RULMECA (RDR BL-2)": Motor module to control 24 V motorized rollers RULMECA RDR BL-2.


"RULMECA (RDR BL-3)": Motor module to control 24 V motorized rollers RULMECA RDR BL-3 (transmission rates 24:1, 36:1, 49:1, 64:1, 96:1; not suitable for transmission rates 12:1, 16:1).


"Interroll (EC200)": Motor module to control 24 V motorized rollers Interroll EC200.


"Interroll (EC300)": Motor module to control 24 V motorized rollers Interroll EC300.


"Interroll (EC310)": Motor module to control 24 V motorized rollers Interroll EC310.


"Interroll (EC5000 AI, 24 V, 20 W/35 W)": Motor module to control 24 V motorized rollers Interroll Typ EC5000 AI, 24 V, 20 W/35 W.


"Interroll (EC5000 AI, 48 V, 20 W/35 W/50 W)": Motor module to control 48 V motorized rollers Interroll Typ EC5000 AI, 48 V, 20 W/35 W/50 W.


"Rollex (Typ 840)": Motor module to control 24 V motorized rollers Rollex 840.

Drive
Number of Drives

In the motor module UL approved fuses are placed before each of the motor supply connections. A short circuit in the motor causes this fuse to blow, protecting the connection cable between the module and motor.

After blowing the not exchangeable fuse the module is no longer functional and the module needs to be replaced. The characteristics of the fuse must be checked against the motor data before using the module.

The protection circuit in the module allows a very simple protection of the motor cables. The fuse for the cable protection is a slow-blow one; without short circuit the robust behavior of the module remains.


"no":

The motor module is designed to supply the 24 V directly to the motor. At high currents or surges as they occur for example at braking, the module will not be damaged.

The cable protection should be realized outside the motor module with additional measures.

Line protection fuse

Modules with a flat housing design and with cables which exit the sides make these ideal for installation in cable ducts, cable channels, cable troughs, cable rails or cable trays. Please note the respective housing depth for your particular installation.

Flat design, installation in cable duct possible
Inputs digital Outputs digital

inputs are supplied by ASi or by AUX (auxiliary 24 V power). If supplied by ASi, inputs shall not be connected to earth or to external potential.

Input voltage (sensor supply)

Electronic outputs are supplied by ASi or by AUX (auxiliary 24 V power). If supplied by ASi, outputs shall not be connected to earth or to external potential.

 

For relay outputs the relay contacts are initiated from ASi. The load circuit is powered externally as specified in the data sheet.

Output voltage (actuator supply)

Under normal conditions (no bus termination or repeater), the permissible total length of the ASi segment is max. 100 m. The calculation should take into consideration that the length of the connection cable (round cable) for each connected passive distributor must be doubled.

In the case of the active distributors (ASi modules) however only the one ASi profile cable is counted.

Round cable

The connection to ASi as well to AUX (auxiliary 24 V power) is made via yellow resp. black ASi profile cable with piercing technology or via M12 socket (in IP20 via clamps).


Line protection: If the module is supplied via a M12 connection with A or B coding, it may only be used with a current load of max. 4 A per pin in acc. with IEC 61076-2-101 and IEC 61076-2-109. A fused tap is recommended. There is no such limitation for modules supplied via piercing contacts.

ASi connection

AB address (max. 62 AB addresses/ASi network), 2 AB addresses (max. 31 modules with 2 AB addresses), Single addresses (max. 31 Single addresses/ASi network), ASi-5 address (max. 62 ASi-5 addresses/ASi network), mixed use allowed.
For ASi modules with two ASi nodes the second Asi node is turned off as long as the first Asi node is addressed to address "0".
Upon request, ASi modules are available with specific ASi node profiles.

ASi address
Article No.
BWU3501ASi-3 compatible24 V DC motors2nono2-out of AUXout of AUXnoASi profile cable1 AB address
BWU3551ASi-3 compatible24 V DC motors1nono42 x electronicout of ASiout of AUXnoASi profile cable1 Single address