Control 48 V drive solutions efficiently with ASi-5

Complete solution for 48 V drive technology

Increasingly high performance is expected in modern conveyor applications. 48 V motors, especially in the form of roller drives, are therefore becoming increasingly important. This is because they deliver twice as much power at the same current as their popular 24 V counterparts. Besides greater flexibility, this also yields potential savings, especially in energy distribution.

 

With ASi-5 you can realize applications with both 24 V and 48 V motorized rollers - and benefit from the typical ASi advantages: easy installation, high flexibility and low costs.

Our complete solution for the drive technology ensures efficient power distribution in 48 V AUX systems. The solution is comprised of:
 

  • ASi-5 Motor Modules for specific manufacturers or drives which enable 48 VDC motors to be controlled directly via ASi without an additional control unit and supplied with power using piercing technology.
  • New gray 48 V AUX profile cable (BW4243) for simple, flexible and cost-efficient power distribution from the ASi system. It enables 20 V to be distributed simultaneously with 48 V. To avoid mix-ups in an installation with 24 V and 48 V AUX, the 48 V cable is gray in color, which makes the cable stand out visually from the black AUX profile cable used for 24 V.
  • 48 V/24 V voltage converters in three variants. They enable a wide variety of 24 V sensors to be integrated locally in a 48 V application in the field - simply via the gray cable. There is no need for an additional 24 V power supply unit in the switching cabinet and no additional 24 V AUX cable has to be laid through the complete system. 

Efficient control of 48 V motors with ASi-5

Our ASi-5 motor modules (see for example BWU4212 for Interroll EC5000 AI) provide a flexible and cost-efficient solution for power distribution - they can supply roller drives with 20 W, 35 W or even up to 50 W. They typically integrate several drives, provide additional sensor inputs, and allow speeds and ramps to be written cyclically - with a resolution of 16 bits. This means that you can set acceleration and braking processes individually for each object and - in the case of conveyor applications - take into account parameters such as the weight, size, position or risk of tipping of individual conveyed goods in the material flow control. The ASIMON360 software makes it easy to integrate and operate the motor modules.

Passive Safety as option

Whereas the drives are supplied via a separate AUX cable, the voltage supply and data transfer of connected sensors takes place via the yellow ASi profile cable. This makes it possible to simply switch off the drives in a safety-oriented manner by just safely switching off the AUX supply (keyword: passive safety). Meanwhile, the sensors continue to be supplied and read out via ASi.

All signals on a single cable

Besides giving you the ability to control motors, AS-Interface also enables you to transmit other standard or safety signals over the same cable. This reduces the wiring effort and associated costs.

Save valuable resources

48 V motors deliver twice as much power for the same current as their more common 24 V counterparts. With ASi-5, you can control both. Generally speaking, with ASi you need almost no expensive plugs or sockets and only a single cable. This significantly reduces installation times and material costs. In addition, valuable resources such as expensive assembly and planning time, but also copper or plastic, which are required to manufacture the components, can be saved on a large scale. There is also a positive environmental effect when it comes to disposal – less waste is produced.

 

Less connectors – More connection

Integrate 24 V sensors simply and cost-efficiently

Are you considering integrating individual 24 V sensors and actuators into your 48 V drive solution? Then take advantage of our 48 V/24 V voltage converters in IP67. They allow ASi modules - with and without M12 connection - as well as non-ASi participants with M12 connection to be integrated easily and cost-efficiently at any desired location. Because a 24 V tap is possible anywhere in the field. The advantage: You do not have to lay and fix any additional black profile cable anywhere through the entire system to supply just a few modules with 24 V. This saves you a lot of time, installation effort and more. The purchase cost for a voltage converter pays for itself by eliminating just a few meters of 24 V profile cable. The cost for a 24 V power supplyis of course also eliminated.

48 V to 24 V voltage converters for every need

Our voltage converters are all short-circuit proof and supply 1 A each, making them ideal for "smaller" 24 V consumers. They are simply clamped to the gray 48 V AUX profile cable using piercing technology.

 

 

Solution for 24 V flat cable

junction

  • Create a 24 V junction on a black profile cable 
  • Connect all other ASi modules with AUX supply and piercing technology 
  • BWU4248: voltage converter 48 V/24 V, 1 A, AUX 48 V profile cable to AUX 24 V profile cable, 35 mm, IP67

Solution for ASi modules

with supply via M12

  • Create a junction with ASi and 24 V on round cable
  • Connect all further ASi modules with AUX supply via M12
  • BWU4249: voltage converter 48 V/24 V, 1 A, ASi/AUX 48 V profile cable to 1 x M12 cable socket, angled, 5-pin (ASi/AUX 24 V), 35 mm, IP67

 

      Solution for non-ASi
      participants (M12)

      • Create a junction with 24 V on round cable
      • Connect non-ASi participants with 24 V via M12
      • BWU4250: voltage converter 48 V/24 V, 1 A, AUX 48 V profile cable to 1 x M12 cable socket, angled, 5-pin (AUX 24 V), 35 mm, IP67

      FAQs about 48 V drive technology

      To start with, there is the ASi-5 motor module for Interroll EC5000 AI (BWU4212) for efficient control of 48 V motors. Products from other manufacturers and drives can also be controlled with relevant ASi solutions from Bihl+Wiedemann on request. Integration is also possible in "Logistics 4.0" using the new ASi-5/ASi-3 gateways for fieldbuses such as PROFINET, EtherNet/IP, Sercos or EtherCAT.

      Compared to other multi-zone controls for conveyor applications, the ASi-5 motor modules from Bihl+Wiedemann and the ASIMON360 configuration software significantly reduce the configuration effort. Settings and parameters are only assigned for the first motor module. These can then be easily copied to all additional modules. The entire system requires only one IP address and only one Web server — the Bihl+Wiedemann system can be put into operation quickly and easily.

      Devices with 24 VDC voltage, the ASi connection of devices and the ASi gateway must never be connected to 48 VDC. Therefore, it is advisable to use the designated gray cable.

      Do you have questions about our 48 V drive solutions?

      ASi – A resource-saving technology

      Thanks to the greatly reduced wiring effort with AS-Interface, you save assembly and material costs. This saves valuable resources.

       

      More information!