ASi PCB Module, 73 mm x 37,5 mm, 2 analog inputs (0…10 V), input voltage/sensor supply out of ASi, max. 75 mA for sensor supply, periphery connection via wiring pins, angled, LED, ASi connection via wiring pins, angled, 1 single slave
circuit board 73 mm x 37,5 mm
Circuit board dimensions
2 holes for assembly angles.
73 mm x 37,5 mm
Inputs Safety, SIL 3, Cat. 4
Outputs Safety, SIL 3, cat. 4
Safety signal inputs
2 x 0 ... 10 V
further connection options are available on request.
wiring pins, angled (pins 180° to PCB)
wiring pins, straight (pins 90° to PCB)
plug-in spring-type / screw terminals
wiring pins, angled
Coating protects components and circuit boards when touched.
LED status display
status of in- and outputs is indicated by LEDs. In addition to that, both ASi LEDs (PWR green and FAULT red) show as usual regarding the ASi Slaves- the status of the ASi Slaves. Uaux is indicated by a green LED.
Input voltage (sensor supply)
inputs are supplied by ASi or by AUX (auxiliary 24 V power). If supplied by ASi, inputs shall not be connected to earth or to external potential.
out of ASi
Output voltage (actuator supply)
Electronic outputs are supplied by ASi or by AUX (auxiliary 24 V power). If supplied by ASi, outputs shall not be connected to earth or to external potential.
For relay outputs the relay contacts are initiated from ASi. The load circuit is powered externally as specified in the data sheet.
The connection to ASi as well to AUX (auxiliary 24 V power) is made via yellow resp. black ASi profile cable with piercing technology or via M12 socket (in IP20 via clamps).
Line protection: If the module is supplied via a M12 connection with A or B coding, it may only be used with a current load of max. 4 A per pin in acc. with IEC 61076-2-101 and IEC 61076-2-109. A fused tap is recommended. There is no such limitation for modules supplied via piercing contacts.
wiring pin, angled
AB Slave (max. 62 AB Slaves/ASi network), 2 AB Slaves (max. 31 modules with 2 AB Slaves), Single Slaves (max. 31 Single Slaves/ASi network), ASi-5 Slave (max. 62 ASi-5 Slaves/ASi network), mixed use allowed. For modules with two slaves the second slave is turned off as long as the first slave is addressed to address "0". Upon request, slaves are available with specific ASi Slave profiles.