BWU3115ASi Motor Module, IP67, M12 for Lenze Smart motor, 1M/3I

Product description

ASi Motor Module in IP67, with 4 x M12 sockets for 1 x Lenze Smart motor, 3 digital inputs, motor control supply via AUX, input voltage/sensor supply out of AUX, periphery connection via 4 x M12 sockets, 5 poles, ASi connection via profile cable and piercing technology, 1 AB address

2 x M12 connections compatible with Lenze Smart Motor

2 x M12 connections for upt to 3 additional sensors

The substructure module is not included in the scope of delivery.

 

Technical data

Drive

"SEW MOVIMOT®": Motor module to control geared motors with frequency inverters.

 

"NORD": Motor module to control geared motors with frequency inverters.


"EBM-Papst K4": Motor module to control geared motors with frequency inverters.


"SEW MOVI-SWITCH® 1E": Motor module to control motor starters MOVI-SWITCH® 1E.


"SEW MOVI-SWITCH ® 2S": Motor module to control motor starters MOVI-SWITCH® 2S.


"Lenze Smart Motor": Motor module to control Lenze Smart motors and to control additional sensors.


"Itoh Denki (PM500XE/XP)": Motor module to control 24 V motorized rollers Itoh Denki PM500XE/XP.


"Itoh Denki (PM605XE/XP)": Motor module to control 24 V motorized rollers Itoh Denki PM605XE/XP.


"Itoh Denki (PM500XC/XK)": Motor module to control 24 V motorized rollers Itoh Denki PM500XC/XK.


"RULMECA (RDR BL-2)": Motor module to control 24 V motorized rollers RULMECA RDR BL-2.


"RULMECA (RDR BL-3)": Motor module to control 24 V motorized rollers RULMECA RDR BL-3 (transmission rates 24:1, 36:1, 49:1, 64:1, 96:1; not suitable for transmission rates 12:1, 16:1).


"Interroll (EC200)": Motor module to control 24 V motorized rollers Interroll EC200.


"Interroll (EC300)": Motor module to control 24 V motorized rollers Interroll EC300.


"Interroll (EC310)": Motor module to control 24 V motorized rollers Interroll EC310.


"Interroll (EC5000 AI, 24 V, 20 W/35 W)": Motor module to control 24 V motorized rollers Interroll Typ EC5000 AI, 24 V, 20 W/35 W.


"Interroll (EC5000 AI, 48 V, 20 W/35 W/50 W)": Motor module to control 48 V motorized rollers Interroll Typ EC5000 AI, 48 V, 20 W/35 W/50 W.


"Rollex (Typ 840)": Motor module to control 24 V motorized rollers Rollex 840.

 

Brake chopper for 24 V motorized rollers: For limiting the voltage feedback, suitable for all 24 V motorized rollers.

Lenze Smart Motor
Number of Drives 1
Inputs digital 3
Input voltage (sensor supply)

inputs are supplied by ASi or by AUX (auxiliary 24 V power). If supplied by ASi, inputs shall not be connected to earth or to external potential.

out of AUX
Output voltage (actuator supply)

Electronic outputs are supplied by ASi or by AUX (auxiliary 24 V power). If supplied by ASi, outputs shall not be connected to earth or to external potential.

 

For relay outputs the relay contacts are initiated from ASi. The load circuit is powered externally as specified in the data sheet.

out of AUX
Connection 4 x M12 sockets, 5 poles
Round cable

Under normal conditions (no bus termination or repeater), the permissible total length of the ASi segment is max. 100 m. The calculation should take into consideration that the length of the connection cable (round cable) for each connected passive distributor must be doubled.

In the case of the active distributors (ASi modules) however only the one ASi profile cable is counted.

no
ASi address

AB address (max. 62 AB addresses/ASi network), 2 AB addresses (max. 31 modules with 2 AB addresses), Single addresses (max. 31 Single addresses/ASi network), ASi-5 address (max. 62 ASi-5 addresses/ASi network), mixed use allowed.
For ASi modules with two ASi nodes the second Asi node is turned off as long as the first Asi node is addressed to address "0".
Upon request, ASi modules are available with specific ASi node profiles.

1 AB address

The product has earned the following certifications: